Compare commits
5 Commits
| Author | SHA1 | Date | |
|---|---|---|---|
|
90f6794617 | ||
|
|
f35940f6e4 | ||
|
|
7964e1def4 | ||
|
|
3b18174fe2 | ||
|
|
19c7c53e38 |
1
.github/FUNDING.yml
vendored
1
.github/FUNDING.yml
vendored
@ -1 +0,0 @@
|
||||
github: chirpstack
|
||||
7
Makefile
7
Makefile
@ -1,5 +1,4 @@
|
||||
import-lorawan-devices:
|
||||
docker-compose run --rm --entrypoint sh --user root chirpstack -c '\
|
||||
apk add --no-cache git && \
|
||||
git clone https://github.com/brocaar/lorawan-devices /tmp/lorawan-devices && \
|
||||
chirpstack -c /etc/chirpstack import-legacy-lorawan-devices-repository -d /tmp/lorawan-devices'
|
||||
rm -rf lorawan-devices
|
||||
git clone https://github.com/TheThingsNetwork/lorawan-devices
|
||||
docker-compose run --rm chirpstack -c /etc/chirpstack import-ttn-lorawan-devices -d /opt/lorawan-devices
|
||||
|
||||
60
README.md
60
README.md
@ -1,7 +1,7 @@
|
||||
# ChirpStack Docker example
|
||||
|
||||
This repository contains a skeleton to setup the [ChirpStack](https://www.chirpstack.io)
|
||||
open-source LoRaWAN Network Server (v4) using [Docker Compose](https://docs.docker.com/compose/).
|
||||
open-source LoRaWAN Network Server stack using [Docker Compose](https://docs.docker.com/compose/).
|
||||
|
||||
**Note:** Please use this `docker-compose.yml` file as a starting point for testing
|
||||
but keep in mind that for production usage it might need modifications.
|
||||
@ -11,48 +11,20 @@ but keep in mind that for production usage it might need modifications.
|
||||
* `docker-compose.yml`: the docker-compose file containing the services
|
||||
* `configuration/chirpstack`: directory containing the ChirpStack configuration files
|
||||
* `configuration/chirpstack-gateway-bridge`: directory containing the ChirpStack Gateway Bridge configuration
|
||||
* `configuration/mosquitto`: directory containing the Mosquitto (MQTT broker) configuration
|
||||
* `configuration/postgresql/initdb/`: directory containing PostgreSQL initialization scripts
|
||||
|
||||
## Configuration
|
||||
|
||||
This setup is pre-configured for all regions. You can either connect a ChirpStack Gateway Bridge
|
||||
instance (v3.14.0+) to the MQTT broker (port 1883) or connect a Semtech UDP Packet Forwarder.
|
||||
Please note that:
|
||||
instance to the MQTT broker (port 1883). Please note that:
|
||||
|
||||
* You must prefix the MQTT topic with the region.
|
||||
* You must prefix the MQTT topic with the region
|
||||
Please see the region configuration files in the `configuration/chirpstack` for a list
|
||||
of topic prefixes (e.g. eu868, us915_0, au915_0, as923_2, ...).
|
||||
of topic prefixes (e.g. eu868, us915_0, au915, as923_2, ...).
|
||||
* The protobuf marshaler is configured.
|
||||
|
||||
This setup also comes with two instances of the ChirpStack Gateway Bridge. One
|
||||
is configured to handle the Semtech UDP Packet Forwarder data (port 1700), the
|
||||
other is configured to handle the Basics Station protocol (port 3001). Both
|
||||
instances are by default configured for EU868 (using the `eu868` MQTT topic
|
||||
prefix).
|
||||
|
||||
### Reconfigure regions
|
||||
|
||||
ChirpStack has at least one configuration of each region enabled. You will find
|
||||
the list of `enabled_regions` in `configuration/chirpstack/chirpstack.toml`.
|
||||
Each entry in `enabled_regions` refers to the `id` that can be found in the
|
||||
`region_XXX.toml` file. This `region_XXX.toml` also contains a `topic_prefix`
|
||||
configuration which you need to configure the ChirpStack Gateway Bridge
|
||||
UDP instance (see below).
|
||||
|
||||
#### ChirpStack Gateway Bridge (UDP)
|
||||
|
||||
Within the `docker-compose.yml` file, you must replace the `eu868` prefix in the
|
||||
`INTEGRATION__..._TOPIC_TEMPLATE` configuration with the MQTT `topic_prefix` of
|
||||
the region you would like to use (e.g. `us915_0`, `au915_0`, `in865`, ...).
|
||||
|
||||
#### ChirpStack Gateway Bridge (Basics Station)
|
||||
|
||||
Within the `docker-compose.yml` file, you must update the configuration file
|
||||
that the ChirpStack Gateway Bridge instance must used. The default is
|
||||
`chirpstack-gateway-bridge-basicstation-eu868.toml`. For available
|
||||
configuration files, please see the `configuration/chirpstack-gateway-bridge`
|
||||
directory.
|
||||
This setup also comes with a ChirpStack Gateway Bridge instance which is configured to the
|
||||
eu868 topic prefix. You can connect your UDP packet-forwarder based gateway to port 1700.
|
||||
|
||||
# Data persistence
|
||||
|
||||
@ -64,20 +36,18 @@ PostgreSQL and Redis data is persisted in Docker volumes, see the `docker-compos
|
||||
Before using this `docker-compose.yml` file, make sure you have [Docker](https://www.docker.com/community-edition)
|
||||
installed.
|
||||
|
||||
## Importing device repository
|
||||
## Importing TTN device repository
|
||||
|
||||
To import the [lorawan-devices](https://github.com/TheThingsNetwork/lorawan-devices)
|
||||
To import the TTN [lorawan-devices](https://github.com/TheThingsNetwork/lorawan-devices)
|
||||
repository (optional step), run the following command:
|
||||
|
||||
```bash
|
||||
make import-lorawan-devices
|
||||
```
|
||||
|
||||
This will clone the `lorawan-devices` repository and execute the import command of ChirpStack.
|
||||
Please note that for this step you need to have the `make` command installed.
|
||||
|
||||
**Note:** an older snapshot of the `lorawan-devices` repository is cloned as the
|
||||
latest revision no longer contains a `LICENSE` file.
|
||||
This will clone the `lorawan-devices` repository and execute the `import-ttn-lorawan-devices`
|
||||
command of ChirpStack. Please note that for this step, you need to have the `git` and `make`
|
||||
commands installed.
|
||||
|
||||
## Usage
|
||||
|
||||
@ -89,11 +59,3 @@ $ docker-compose up
|
||||
|
||||
After all the components have been initialized and started, you should be able
|
||||
to open http://localhost:8080/ in your browser.
|
||||
|
||||
##
|
||||
|
||||
The example includes the [ChirpStack REST API](https://github.com/chirpstack/chirpstack-rest-api).
|
||||
You should be able to access the UI by opening http://localhost:8090 in your browser.
|
||||
|
||||
**Note:** It is recommended to use the [gRPC](https://www.chirpstack.io/docs/chirpstack/api/grpc.html)
|
||||
interface over the [REST](https://www.chirpstack.io/docs/chirpstack/api/rest.html) interface.
|
||||
|
||||
@ -1,45 +0,0 @@
|
||||
# See https://www.chirpstack.io/gateway-bridge/install/config/ for a full
|
||||
# configuration example and documentation.
|
||||
|
||||
[integration.mqtt.auth.generic]
|
||||
servers=["tcp://mosquitto:1883"]
|
||||
username=""
|
||||
password=""
|
||||
|
||||
[integration.mqtt]
|
||||
event_topic_template="as923/gateway/{{ .GatewayID }}/event/{{ .EventType }}"
|
||||
state_topic_template="as923/gateway/{{ .GatewayID }}/state/{{ .StateType }}"
|
||||
command_topic_template="as923/gateway/{{ .GatewayID }}/command/#"
|
||||
|
||||
[backend]
|
||||
type="basic_station"
|
||||
|
||||
[backend.basic_station]
|
||||
bind=":3001"
|
||||
tls_cert=""
|
||||
tls_key=""
|
||||
ca_cert=""
|
||||
|
||||
region="AS923"
|
||||
frequency_min=915000000
|
||||
frequency_max=928000000
|
||||
|
||||
|
||||
[[backend.basic_station.concentrators]]
|
||||
|
||||
[backend.basic_station.concentrators.multi_sf]
|
||||
frequencies=[
|
||||
923200000,
|
||||
923400000,
|
||||
923600000,
|
||||
923800000,
|
||||
924000000,
|
||||
924200000,
|
||||
924400000,
|
||||
924600000,
|
||||
]
|
||||
|
||||
[backend.basic_station.concentrators.lora_std]
|
||||
frequency=924500000
|
||||
bandwidth=250000
|
||||
spreading_factor=7
|
||||
@ -1,45 +0,0 @@
|
||||
# See https://www.chirpstack.io/gateway-bridge/install/config/ for a full
|
||||
# configuration example and documentation.
|
||||
|
||||
[integration.mqtt.auth.generic]
|
||||
servers=["tcp://mosquitto:1883"]
|
||||
username=""
|
||||
password=""
|
||||
|
||||
[integration.mqtt]
|
||||
event_topic_template="as923_2/gateway/{{ .GatewayID }}/event/{{ .EventType }}"
|
||||
state_topic_template="as923_2/gateway/{{ .GatewayID }}/state/{{ .StateType }}"
|
||||
command_topic_template="as923_2/gateway/{{ .GatewayID }}/command/#"
|
||||
|
||||
[backend]
|
||||
type="basic_station"
|
||||
|
||||
[backend.basic_station]
|
||||
bind=":3001"
|
||||
tls_cert=""
|
||||
tls_key=""
|
||||
ca_cert=""
|
||||
|
||||
region="AS923"
|
||||
frequency_min=915000000
|
||||
frequency_max=928000000
|
||||
|
||||
|
||||
[[backend.basic_station.concentrators]]
|
||||
|
||||
[backend.basic_station.concentrators.multi_sf]
|
||||
frequencies=[
|
||||
921400000,
|
||||
921600000,
|
||||
921800000,
|
||||
922000000,
|
||||
922200000,
|
||||
922400000,
|
||||
922600000,
|
||||
922800000,
|
||||
]
|
||||
|
||||
[backend.basic_station.concentrators.lora_std]
|
||||
frequency=922700000
|
||||
bandwidth=250000
|
||||
spreading_factor=7
|
||||
@ -1,45 +0,0 @@
|
||||
# See https://www.chirpstack.io/gateway-bridge/install/config/ for a full
|
||||
# configuration example and documentation.
|
||||
|
||||
[integration.mqtt.auth.generic]
|
||||
servers=["tcp://mosquitto:1883"]
|
||||
username=""
|
||||
password=""
|
||||
|
||||
[integration.mqtt]
|
||||
event_topic_template="as923_3/gateway/{{ .GatewayID }}/event/{{ .EventType }}"
|
||||
state_topic_template="as923_3/gateway/{{ .GatewayID }}/state/{{ .StateType }}"
|
||||
command_topic_template="as923_3/gateway/{{ .GatewayID }}/command/#"
|
||||
|
||||
[backend]
|
||||
type="basic_station"
|
||||
|
||||
[backend.basic_station]
|
||||
bind=":3001"
|
||||
tls_cert=""
|
||||
tls_key=""
|
||||
ca_cert=""
|
||||
|
||||
region="AS923"
|
||||
frequency_min=915000000
|
||||
frequency_max=928000000
|
||||
|
||||
|
||||
[[backend.basic_station.concentrators]]
|
||||
|
||||
[backend.basic_station.concentrators.multi_sf]
|
||||
frequencies=[
|
||||
916600000,
|
||||
916800000,
|
||||
917000000,
|
||||
917200000,
|
||||
917400000,
|
||||
917600000,
|
||||
917800000,
|
||||
918000000,
|
||||
]
|
||||
|
||||
[backend.basic_station.concentrators.lora_std]
|
||||
frequency=917900000
|
||||
bandwidth=250000
|
||||
spreading_factor=7
|
||||
@ -1,45 +0,0 @@
|
||||
# See https://www.chirpstack.io/gateway-bridge/install/config/ for a full
|
||||
# configuration example and documentation.
|
||||
|
||||
[integration.mqtt.auth.generic]
|
||||
servers=["tcp://mosquitto:1883"]
|
||||
username=""
|
||||
password=""
|
||||
|
||||
[integration.mqtt]
|
||||
event_topic_template="as923_4/gateway/{{ .GatewayID }}/event/{{ .EventType }}"
|
||||
state_topic_template="as923_4/gateway/{{ .GatewayID }}/state/{{ .StateType }}"
|
||||
command_topic_template="as923_4/gateway/{{ .GatewayID }}/command/#"
|
||||
|
||||
[backend]
|
||||
type="basic_station"
|
||||
|
||||
[backend.basic_station]
|
||||
bind=":3001"
|
||||
tls_cert=""
|
||||
tls_key=""
|
||||
ca_cert=""
|
||||
|
||||
region="AS923"
|
||||
frequency_min=915000000
|
||||
frequency_max=928000000
|
||||
|
||||
|
||||
[[backend.basic_station.concentrators]]
|
||||
|
||||
[backend.basic_station.concentrators.multi_sf]
|
||||
frequencies=[
|
||||
917300000,
|
||||
917500000,
|
||||
917700000,
|
||||
917900000,
|
||||
918100000,
|
||||
918300000,
|
||||
918500000,
|
||||
918700000,
|
||||
]
|
||||
|
||||
[backend.basic_station.concentrators.lora_std]
|
||||
frequency=918600000
|
||||
bandwidth=250000
|
||||
spreading_factor=7
|
||||
@ -1,45 +0,0 @@
|
||||
# See https://www.chirpstack.io/gateway-bridge/install/config/ for a full
|
||||
# configuration example and documentation.
|
||||
|
||||
[integration.mqtt.auth.generic]
|
||||
servers=["tcp://mosquitto:1883"]
|
||||
username=""
|
||||
password=""
|
||||
|
||||
[integration.mqtt]
|
||||
event_topic_template="au915_0/gateway/{{ .GatewayID }}/event/{{ .EventType }}"
|
||||
state_topic_template="au915_0/gateway/{{ .GatewayID }}/state/{{ .StateType }}"
|
||||
command_topic_template="au915_0/gateway/{{ .GatewayID }}/command/#"
|
||||
|
||||
[backend]
|
||||
type="basic_station"
|
||||
|
||||
[backend.basic_station]
|
||||
bind=":3001"
|
||||
tls_cert=""
|
||||
tls_key=""
|
||||
ca_cert=""
|
||||
|
||||
region="AU915"
|
||||
frequency_min=915000000
|
||||
frequency_max=928000000
|
||||
|
||||
|
||||
[[backend.basic_station.concentrators]]
|
||||
|
||||
[backend.basic_station.concentrators.multi_sf]
|
||||
frequencies=[
|
||||
915200000,
|
||||
915400000,
|
||||
915600000,
|
||||
915800000,
|
||||
916000000,
|
||||
916200000,
|
||||
916400000,
|
||||
916600000,
|
||||
]
|
||||
|
||||
[backend.basic_station.concentrators.lora_std]
|
||||
frequency=915900000
|
||||
bandwidth=500000
|
||||
spreading_factor=8
|
||||
@ -1,45 +0,0 @@
|
||||
# See https://www.chirpstack.io/gateway-bridge/install/config/ for a full
|
||||
# configuration example and documentation.
|
||||
|
||||
[integration.mqtt.auth.generic]
|
||||
servers=["tcp://mosquitto:1883"]
|
||||
username=""
|
||||
password=""
|
||||
|
||||
[integration.mqtt]
|
||||
event_topic_template="au915_1/gateway/{{ .GatewayID }}/event/{{ .EventType }}"
|
||||
state_topic_template="au915_1/gateway/{{ .GatewayID }}/state/{{ .StateType }}"
|
||||
command_topic_template="au915_1/gateway/{{ .GatewayID }}/command/#"
|
||||
|
||||
[backend]
|
||||
type="basic_station"
|
||||
|
||||
[backend.basic_station]
|
||||
bind=":3001"
|
||||
tls_cert=""
|
||||
tls_key=""
|
||||
ca_cert=""
|
||||
|
||||
region="AU915"
|
||||
frequency_min=915000000
|
||||
frequency_max=928000000
|
||||
|
||||
|
||||
[[backend.basic_station.concentrators]]
|
||||
|
||||
[backend.basic_station.concentrators.multi_sf]
|
||||
frequencies=[
|
||||
916800000,
|
||||
917000000,
|
||||
917200000,
|
||||
917400000,
|
||||
917600000,
|
||||
917800000,
|
||||
918000000,
|
||||
918200000,
|
||||
]
|
||||
|
||||
[backend.basic_station.concentrators.lora_std]
|
||||
frequency=917500000
|
||||
bandwidth=500000
|
||||
spreading_factor=8
|
||||
@ -1,45 +0,0 @@
|
||||
# See https://www.chirpstack.io/gateway-bridge/install/config/ for a full
|
||||
# configuration example and documentation.
|
||||
|
||||
[integration.mqtt.auth.generic]
|
||||
servers=["tcp://mosquitto:1883"]
|
||||
username=""
|
||||
password=""
|
||||
|
||||
[integration.mqtt]
|
||||
event_topic_template="au915_2/gateway/{{ .GatewayID }}/event/{{ .EventType }}"
|
||||
state_topic_template="au915_2/gateway/{{ .GatewayID }}/state/{{ .StateType }}"
|
||||
command_topic_template="au915_2/gateway/{{ .GatewayID }}/command/#"
|
||||
|
||||
[backend]
|
||||
type="basic_station"
|
||||
|
||||
[backend.basic_station]
|
||||
bind=":3001"
|
||||
tls_cert=""
|
||||
tls_key=""
|
||||
ca_cert=""
|
||||
|
||||
region="AU915"
|
||||
frequency_min=915000000
|
||||
frequency_max=928000000
|
||||
|
||||
|
||||
[[backend.basic_station.concentrators]]
|
||||
|
||||
[backend.basic_station.concentrators.multi_sf]
|
||||
frequencies=[
|
||||
918400000,
|
||||
918600000,
|
||||
918800000,
|
||||
919000000,
|
||||
919200000,
|
||||
919400000,
|
||||
919600000,
|
||||
919800000,
|
||||
]
|
||||
|
||||
[backend.basic_station.concentrators.lora_std]
|
||||
frequency=919100000
|
||||
bandwidth=500000
|
||||
spreading_factor=8
|
||||
@ -1,45 +0,0 @@
|
||||
# See https://www.chirpstack.io/gateway-bridge/install/config/ for a full
|
||||
# configuration example and documentation.
|
||||
|
||||
[integration.mqtt.auth.generic]
|
||||
servers=["tcp://mosquitto:1883"]
|
||||
username=""
|
||||
password=""
|
||||
|
||||
[integration.mqtt]
|
||||
event_topic_template="au915_3/gateway/{{ .GatewayID }}/event/{{ .EventType }}"
|
||||
state_topic_template="au915_3/gateway/{{ .GatewayID }}/state/{{ .StateType }}"
|
||||
command_topic_template="au915_3/gateway/{{ .GatewayID }}/command/#"
|
||||
|
||||
[backend]
|
||||
type="basic_station"
|
||||
|
||||
[backend.basic_station]
|
||||
bind=":3001"
|
||||
tls_cert=""
|
||||
tls_key=""
|
||||
ca_cert=""
|
||||
|
||||
region="AU915"
|
||||
frequency_min=915000000
|
||||
frequency_max=928000000
|
||||
|
||||
|
||||
[[backend.basic_station.concentrators]]
|
||||
|
||||
[backend.basic_station.concentrators.multi_sf]
|
||||
frequencies=[
|
||||
920000000,
|
||||
920200000,
|
||||
920400000,
|
||||
920600000,
|
||||
920800000,
|
||||
921000000,
|
||||
921200000,
|
||||
921400000,
|
||||
]
|
||||
|
||||
[backend.basic_station.concentrators.lora_std]
|
||||
frequency=920700000
|
||||
bandwidth=500000
|
||||
spreading_factor=8
|
||||
@ -1,45 +0,0 @@
|
||||
# See https://www.chirpstack.io/gateway-bridge/install/config/ for a full
|
||||
# configuration example and documentation.
|
||||
|
||||
[integration.mqtt.auth.generic]
|
||||
servers=["tcp://mosquitto:1883"]
|
||||
username=""
|
||||
password=""
|
||||
|
||||
[integration.mqtt]
|
||||
event_topic_template="au915_4/gateway/{{ .GatewayID }}/event/{{ .EventType }}"
|
||||
state_topic_template="au915_4/gateway/{{ .GatewayID }}/state/{{ .StateType }}"
|
||||
command_topic_template="au915_4/gateway/{{ .GatewayID }}/command/#"
|
||||
|
||||
[backend]
|
||||
type="basic_station"
|
||||
|
||||
[backend.basic_station]
|
||||
bind=":3001"
|
||||
tls_cert=""
|
||||
tls_key=""
|
||||
ca_cert=""
|
||||
|
||||
region="AU915"
|
||||
frequency_min=915000000
|
||||
frequency_max=928000000
|
||||
|
||||
|
||||
[[backend.basic_station.concentrators]]
|
||||
|
||||
[backend.basic_station.concentrators.multi_sf]
|
||||
frequencies=[
|
||||
921600000,
|
||||
921800000,
|
||||
922000000,
|
||||
922200000,
|
||||
922400000,
|
||||
922600000,
|
||||
922800000,
|
||||
923000000,
|
||||
]
|
||||
|
||||
[backend.basic_station.concentrators.lora_std]
|
||||
frequency=922300000
|
||||
bandwidth=500000
|
||||
spreading_factor=8
|
||||
@ -1,45 +0,0 @@
|
||||
# See https://www.chirpstack.io/gateway-bridge/install/config/ for a full
|
||||
# configuration example and documentation.
|
||||
|
||||
[integration.mqtt.auth.generic]
|
||||
servers=["tcp://mosquitto:1883"]
|
||||
username=""
|
||||
password=""
|
||||
|
||||
[integration.mqtt]
|
||||
event_topic_template="au915_5/gateway/{{ .GatewayID }}/event/{{ .EventType }}"
|
||||
state_topic_template="au915_5/gateway/{{ .GatewayID }}/state/{{ .StateType }}"
|
||||
command_topic_template="au915_5/gateway/{{ .GatewayID }}/command/#"
|
||||
|
||||
[backend]
|
||||
type="basic_station"
|
||||
|
||||
[backend.basic_station]
|
||||
bind=":3001"
|
||||
tls_cert=""
|
||||
tls_key=""
|
||||
ca_cert=""
|
||||
|
||||
region="AU915"
|
||||
frequency_min=915000000
|
||||
frequency_max=928000000
|
||||
|
||||
|
||||
[[backend.basic_station.concentrators]]
|
||||
|
||||
[backend.basic_station.concentrators.multi_sf]
|
||||
frequencies=[
|
||||
923200000,
|
||||
923400000,
|
||||
923600000,
|
||||
923800000,
|
||||
924000000,
|
||||
924200000,
|
||||
924400000,
|
||||
924600000,
|
||||
]
|
||||
|
||||
[backend.basic_station.concentrators.lora_std]
|
||||
frequency=923900000
|
||||
bandwidth=500000
|
||||
spreading_factor=8
|
||||
@ -1,45 +0,0 @@
|
||||
# See https://www.chirpstack.io/gateway-bridge/install/config/ for a full
|
||||
# configuration example and documentation.
|
||||
|
||||
[integration.mqtt.auth.generic]
|
||||
servers=["tcp://mosquitto:1883"]
|
||||
username=""
|
||||
password=""
|
||||
|
||||
[integration.mqtt]
|
||||
event_topic_template="au915_6/gateway/{{ .GatewayID }}/event/{{ .EventType }}"
|
||||
state_topic_template="au915_6/gateway/{{ .GatewayID }}/state/{{ .StateType }}"
|
||||
command_topic_template="au915_6/gateway/{{ .GatewayID }}/command/#"
|
||||
|
||||
[backend]
|
||||
type="basic_station"
|
||||
|
||||
[backend.basic_station]
|
||||
bind=":3001"
|
||||
tls_cert=""
|
||||
tls_key=""
|
||||
ca_cert=""
|
||||
|
||||
region="AU915"
|
||||
frequency_min=915000000
|
||||
frequency_max=928000000
|
||||
|
||||
|
||||
[[backend.basic_station.concentrators]]
|
||||
|
||||
[backend.basic_station.concentrators.multi_sf]
|
||||
frequencies=[
|
||||
924800000,
|
||||
925000000,
|
||||
925200000,
|
||||
925400000,
|
||||
925600000,
|
||||
925800000,
|
||||
926000000,
|
||||
926200000,
|
||||
]
|
||||
|
||||
[backend.basic_station.concentrators.lora_std]
|
||||
frequency=925500000
|
||||
bandwidth=500000
|
||||
spreading_factor=8
|
||||
@ -1,45 +0,0 @@
|
||||
# See https://www.chirpstack.io/gateway-bridge/install/config/ for a full
|
||||
# configuration example and documentation.
|
||||
|
||||
[integration.mqtt.auth.generic]
|
||||
servers=["tcp://mosquitto:1883"]
|
||||
username=""
|
||||
password=""
|
||||
|
||||
[integration.mqtt]
|
||||
event_topic_template="au915_7/gateway/{{ .GatewayID }}/event/{{ .EventType }}"
|
||||
state_topic_template="au915_7/gateway/{{ .GatewayID }}/state/{{ .StateType }}"
|
||||
command_topic_template="au915_7/gateway/{{ .GatewayID }}/command/#"
|
||||
|
||||
[backend]
|
||||
type="basic_station"
|
||||
|
||||
[backend.basic_station]
|
||||
bind=":3001"
|
||||
tls_cert=""
|
||||
tls_key=""
|
||||
ca_cert=""
|
||||
|
||||
region="AU915"
|
||||
frequency_min=915000000
|
||||
frequency_max=928000000
|
||||
|
||||
|
||||
[[backend.basic_station.concentrators]]
|
||||
|
||||
[backend.basic_station.concentrators.multi_sf]
|
||||
frequencies=[
|
||||
926400000,
|
||||
926600000,
|
||||
926800000,
|
||||
927000000,
|
||||
927200000,
|
||||
927400000,
|
||||
927600000,
|
||||
927800000,
|
||||
]
|
||||
|
||||
[backend.basic_station.concentrators.lora_std]
|
||||
frequency=927100000
|
||||
bandwidth=500000
|
||||
spreading_factor=8
|
||||
@ -1,40 +0,0 @@
|
||||
# See https://www.chirpstack.io/gateway-bridge/install/config/ for a full
|
||||
# configuration example and documentation.
|
||||
|
||||
[integration.mqtt.auth.generic]
|
||||
servers=["tcp://mosquitto:1883"]
|
||||
username=""
|
||||
password=""
|
||||
|
||||
[integration.mqtt]
|
||||
event_topic_template="cn470_0/gateway/{{ .GatewayID }}/event/{{ .EventType }}"
|
||||
state_topic_template="cn470_0/gateway/{{ .GatewayID }}/state/{{ .StateType }}"
|
||||
command_topic_template="cn470_0/gateway/{{ .GatewayID }}/command/#"
|
||||
|
||||
[backend]
|
||||
type="basic_station"
|
||||
|
||||
[backend.basic_station]
|
||||
bind=":3001"
|
||||
tls_cert=""
|
||||
tls_key=""
|
||||
ca_cert=""
|
||||
|
||||
region="CN470"
|
||||
frequency_min=470000000
|
||||
frequency_max=510000000
|
||||
|
||||
|
||||
[[backend.basic_station.concentrators]]
|
||||
|
||||
[backend.basic_station.concentrators.multi_sf]
|
||||
frequencies=[
|
||||
470300000,
|
||||
470500000,
|
||||
470700000,
|
||||
470900000,
|
||||
471100000,
|
||||
471300000,
|
||||
471500000,
|
||||
471700000,
|
||||
]
|
||||
@ -1,40 +0,0 @@
|
||||
# See https://www.chirpstack.io/gateway-bridge/install/config/ for a full
|
||||
# configuration example and documentation.
|
||||
|
||||
[integration.mqtt.auth.generic]
|
||||
servers=["tcp://mosquitto:1883"]
|
||||
username=""
|
||||
password=""
|
||||
|
||||
[integration.mqtt]
|
||||
event_topic_template="cn470_1/gateway/{{ .GatewayID }}/event/{{ .EventType }}"
|
||||
state_topic_template="cn470_1/gateway/{{ .GatewayID }}/state/{{ .StateType }}"
|
||||
command_topic_template="cn470_1/gateway/{{ .GatewayID }}/command/#"
|
||||
|
||||
[backend]
|
||||
type="basic_station"
|
||||
|
||||
[backend.basic_station]
|
||||
bind=":3001"
|
||||
tls_cert=""
|
||||
tls_key=""
|
||||
ca_cert=""
|
||||
|
||||
region="CN470"
|
||||
frequency_min=470000000
|
||||
frequency_max=510000000
|
||||
|
||||
|
||||
[[backend.basic_station.concentrators]]
|
||||
|
||||
[backend.basic_station.concentrators.multi_sf]
|
||||
frequencies=[
|
||||
471900000,
|
||||
472100000,
|
||||
472300000,
|
||||
472500000,
|
||||
472700000,
|
||||
472900000,
|
||||
473100000,
|
||||
473300000,
|
||||
]
|
||||
@ -1,40 +0,0 @@
|
||||
# See https://www.chirpstack.io/gateway-bridge/install/config/ for a full
|
||||
# configuration example and documentation.
|
||||
|
||||
[integration.mqtt.auth.generic]
|
||||
servers=["tcp://mosquitto:1883"]
|
||||
username=""
|
||||
password=""
|
||||
|
||||
[integration.mqtt]
|
||||
event_topic_template="cn470_10/gateway/{{ .GatewayID }}/event/{{ .EventType }}"
|
||||
state_topic_template="cn470_10/gateway/{{ .GatewayID }}/state/{{ .StateType }}"
|
||||
command_topic_template="cn470_10/gateway/{{ .GatewayID }}/command/#"
|
||||
|
||||
[backend]
|
||||
type="basic_station"
|
||||
|
||||
[backend.basic_station]
|
||||
bind=":3001"
|
||||
tls_cert=""
|
||||
tls_key=""
|
||||
ca_cert=""
|
||||
|
||||
region="CN470"
|
||||
frequency_min=470000000
|
||||
frequency_max=510000000
|
||||
|
||||
|
||||
[[backend.basic_station.concentrators]]
|
||||
|
||||
[backend.basic_station.concentrators.multi_sf]
|
||||
frequencies=[
|
||||
486300000,
|
||||
486500000,
|
||||
486700000,
|
||||
486900000,
|
||||
487100000,
|
||||
487300000,
|
||||
487500000,
|
||||
487700000,
|
||||
]
|
||||
@ -1,40 +0,0 @@
|
||||
# See https://www.chirpstack.io/gateway-bridge/install/config/ for a full
|
||||
# configuration example and documentation.
|
||||
|
||||
[integration.mqtt.auth.generic]
|
||||
servers=["tcp://mosquitto:1883"]
|
||||
username=""
|
||||
password=""
|
||||
|
||||
[integration.mqtt]
|
||||
event_topic_template="cn470_11/gateway/{{ .GatewayID }}/event/{{ .EventType }}"
|
||||
state_topic_template="cn470_11/gateway/{{ .GatewayID }}/state/{{ .StateType }}"
|
||||
command_topic_template="cn470_11/gateway/{{ .GatewayID }}/command/#"
|
||||
|
||||
[backend]
|
||||
type="basic_station"
|
||||
|
||||
[backend.basic_station]
|
||||
bind=":3001"
|
||||
tls_cert=""
|
||||
tls_key=""
|
||||
ca_cert=""
|
||||
|
||||
region="CN470"
|
||||
frequency_min=470000000
|
||||
frequency_max=510000000
|
||||
|
||||
|
||||
[[backend.basic_station.concentrators]]
|
||||
|
||||
[backend.basic_station.concentrators.multi_sf]
|
||||
frequencies=[
|
||||
487900000,
|
||||
488100000,
|
||||
488300000,
|
||||
488500000,
|
||||
488700000,
|
||||
488900000,
|
||||
489100000,
|
||||
489300000,
|
||||
]
|
||||
@ -1,40 +0,0 @@
|
||||
# See https://www.chirpstack.io/gateway-bridge/install/config/ for a full
|
||||
# configuration example and documentation.
|
||||
|
||||
[integration.mqtt.auth.generic]
|
||||
servers=["tcp://mosquitto:1883"]
|
||||
username=""
|
||||
password=""
|
||||
|
||||
[integration.mqtt]
|
||||
event_topic_template="cn470_2/gateway/{{ .GatewayID }}/event/{{ .EventType }}"
|
||||
state_topic_template="cn470_2/gateway/{{ .GatewayID }}/state/{{ .StateType }}"
|
||||
command_topic_template="cn470_2/gateway/{{ .GatewayID }}/command/#"
|
||||
|
||||
[backend]
|
||||
type="basic_station"
|
||||
|
||||
[backend.basic_station]
|
||||
bind=":3001"
|
||||
tls_cert=""
|
||||
tls_key=""
|
||||
ca_cert=""
|
||||
|
||||
region="CN470"
|
||||
frequency_min=470000000
|
||||
frequency_max=510000000
|
||||
|
||||
|
||||
[[backend.basic_station.concentrators]]
|
||||
|
||||
[backend.basic_station.concentrators.multi_sf]
|
||||
frequencies=[
|
||||
473500000,
|
||||
473700000,
|
||||
473900000,
|
||||
474100000,
|
||||
474300000,
|
||||
474500000,
|
||||
474700000,
|
||||
474900000,
|
||||
]
|
||||
@ -1,40 +0,0 @@
|
||||
# See https://www.chirpstack.io/gateway-bridge/install/config/ for a full
|
||||
# configuration example and documentation.
|
||||
|
||||
[integration.mqtt.auth.generic]
|
||||
servers=["tcp://mosquitto:1883"]
|
||||
username=""
|
||||
password=""
|
||||
|
||||
[integration.mqtt]
|
||||
event_topic_template="cn470_3/gateway/{{ .GatewayID }}/event/{{ .EventType }}"
|
||||
state_topic_template="cn470_3/gateway/{{ .GatewayID }}/state/{{ .StateType }}"
|
||||
command_topic_template="cn470_3/gateway/{{ .GatewayID }}/command/#"
|
||||
|
||||
[backend]
|
||||
type="basic_station"
|
||||
|
||||
[backend.basic_station]
|
||||
bind=":3001"
|
||||
tls_cert=""
|
||||
tls_key=""
|
||||
ca_cert=""
|
||||
|
||||
region="CN470"
|
||||
frequency_min=470000000
|
||||
frequency_max=510000000
|
||||
|
||||
|
||||
[[backend.basic_station.concentrators]]
|
||||
|
||||
[backend.basic_station.concentrators.multi_sf]
|
||||
frequencies=[
|
||||
475100000,
|
||||
475300000,
|
||||
475500000,
|
||||
475700000,
|
||||
475900000,
|
||||
476100000,
|
||||
476300000,
|
||||
476500000,
|
||||
]
|
||||
@ -1,40 +0,0 @@
|
||||
# See https://www.chirpstack.io/gateway-bridge/install/config/ for a full
|
||||
# configuration example and documentation.
|
||||
|
||||
[integration.mqtt.auth.generic]
|
||||
servers=["tcp://mosquitto:1883"]
|
||||
username=""
|
||||
password=""
|
||||
|
||||
[integration.mqtt]
|
||||
event_topic_template="cn470_4/gateway/{{ .GatewayID }}/event/{{ .EventType }}"
|
||||
state_topic_template="cn470_4/gateway/{{ .GatewayID }}/state/{{ .StateType }}"
|
||||
command_topic_template="cn470_4/gateway/{{ .GatewayID }}/command/#"
|
||||
|
||||
[backend]
|
||||
type="basic_station"
|
||||
|
||||
[backend.basic_station]
|
||||
bind=":3001"
|
||||
tls_cert=""
|
||||
tls_key=""
|
||||
ca_cert=""
|
||||
|
||||
region="CN470"
|
||||
frequency_min=470000000
|
||||
frequency_max=510000000
|
||||
|
||||
|
||||
[[backend.basic_station.concentrators]]
|
||||
|
||||
[backend.basic_station.concentrators.multi_sf]
|
||||
frequencies=[
|
||||
476700000,
|
||||
476900000,
|
||||
477100000,
|
||||
477300000,
|
||||
477500000,
|
||||
477700000,
|
||||
477900000,
|
||||
478100000,
|
||||
]
|
||||
@ -1,40 +0,0 @@
|
||||
# See https://www.chirpstack.io/gateway-bridge/install/config/ for a full
|
||||
# configuration example and documentation.
|
||||
|
||||
[integration.mqtt.auth.generic]
|
||||
servers=["tcp://mosquitto:1883"]
|
||||
username=""
|
||||
password=""
|
||||
|
||||
[integration.mqtt]
|
||||
event_topic_template="cn470_5/gateway/{{ .GatewayID }}/event/{{ .EventType }}"
|
||||
state_topic_template="cn470_5/gateway/{{ .GatewayID }}/state/{{ .StateType }}"
|
||||
command_topic_template="cn470_5/gateway/{{ .GatewayID }}/command/#"
|
||||
|
||||
[backend]
|
||||
type="basic_station"
|
||||
|
||||
[backend.basic_station]
|
||||
bind=":3001"
|
||||
tls_cert=""
|
||||
tls_key=""
|
||||
ca_cert=""
|
||||
|
||||
region="CN470"
|
||||
frequency_min=470000000
|
||||
frequency_max=510000000
|
||||
|
||||
|
||||
[[backend.basic_station.concentrators]]
|
||||
|
||||
[backend.basic_station.concentrators.multi_sf]
|
||||
frequencies=[
|
||||
478300000,
|
||||
478500000,
|
||||
478700000,
|
||||
478900000,
|
||||
479100000,
|
||||
479300000,
|
||||
479500000,
|
||||
479700000,
|
||||
]
|
||||
@ -1,40 +0,0 @@
|
||||
# See https://www.chirpstack.io/gateway-bridge/install/config/ for a full
|
||||
# configuration example and documentation.
|
||||
|
||||
[integration.mqtt.auth.generic]
|
||||
servers=["tcp://mosquitto:1883"]
|
||||
username=""
|
||||
password=""
|
||||
|
||||
[integration.mqtt]
|
||||
event_topic_template="cn470_6/gateway/{{ .GatewayID }}/event/{{ .EventType }}"
|
||||
state_topic_template="cn470_6/gateway/{{ .GatewayID }}/state/{{ .StateType }}"
|
||||
command_topic_template="cn470_6/gateway/{{ .GatewayID }}/command/#"
|
||||
|
||||
[backend]
|
||||
type="basic_station"
|
||||
|
||||
[backend.basic_station]
|
||||
bind=":3001"
|
||||
tls_cert=""
|
||||
tls_key=""
|
||||
ca_cert=""
|
||||
|
||||
region="CN470"
|
||||
frequency_min=470000000
|
||||
frequency_max=510000000
|
||||
|
||||
|
||||
[[backend.basic_station.concentrators]]
|
||||
|
||||
[backend.basic_station.concentrators.multi_sf]
|
||||
frequencies=[
|
||||
479900000,
|
||||
480100000,
|
||||
480300000,
|
||||
480500000,
|
||||
480700000,
|
||||
480900000,
|
||||
481100000,
|
||||
481300000,
|
||||
]
|
||||
@ -1,40 +0,0 @@
|
||||
# See https://www.chirpstack.io/gateway-bridge/install/config/ for a full
|
||||
# configuration example and documentation.
|
||||
|
||||
[integration.mqtt.auth.generic]
|
||||
servers=["tcp://mosquitto:1883"]
|
||||
username=""
|
||||
password=""
|
||||
|
||||
[integration.mqtt]
|
||||
event_topic_template="cn470_7/gateway/{{ .GatewayID }}/event/{{ .EventType }}"
|
||||
state_topic_template="cn470_7/gateway/{{ .GatewayID }}/state/{{ .StateType }}"
|
||||
command_topic_template="cn470_7/gateway/{{ .GatewayID }}/command/#"
|
||||
|
||||
[backend]
|
||||
type="basic_station"
|
||||
|
||||
[backend.basic_station]
|
||||
bind=":3001"
|
||||
tls_cert=""
|
||||
tls_key=""
|
||||
ca_cert=""
|
||||
|
||||
region="CN470"
|
||||
frequency_min=470000000
|
||||
frequency_max=510000000
|
||||
|
||||
|
||||
[[backend.basic_station.concentrators]]
|
||||
|
||||
[backend.basic_station.concentrators.multi_sf]
|
||||
frequencies=[
|
||||
481500000,
|
||||
481700000,
|
||||
481900000,
|
||||
482100000,
|
||||
482300000,
|
||||
482500000,
|
||||
482700000,
|
||||
482900000,
|
||||
]
|
||||
@ -1,40 +0,0 @@
|
||||
# See https://www.chirpstack.io/gateway-bridge/install/config/ for a full
|
||||
# configuration example and documentation.
|
||||
|
||||
[integration.mqtt.auth.generic]
|
||||
servers=["tcp://mosquitto:1883"]
|
||||
username=""
|
||||
password=""
|
||||
|
||||
[integration.mqtt]
|
||||
event_topic_template="cn470_8/gateway/{{ .GatewayID }}/event/{{ .EventType }}"
|
||||
state_topic_template="cn470_8/gateway/{{ .GatewayID }}/state/{{ .StateType }}"
|
||||
command_topic_template="cn470_8/gateway/{{ .GatewayID }}/command/#"
|
||||
|
||||
[backend]
|
||||
type="basic_station"
|
||||
|
||||
[backend.basic_station]
|
||||
bind=":3001"
|
||||
tls_cert=""
|
||||
tls_key=""
|
||||
ca_cert=""
|
||||
|
||||
region="CN470"
|
||||
frequency_min=470000000
|
||||
frequency_max=510000000
|
||||
|
||||
|
||||
[[backend.basic_station.concentrators]]
|
||||
|
||||
[backend.basic_station.concentrators.multi_sf]
|
||||
frequencies=[
|
||||
483100000,
|
||||
483300000,
|
||||
483500000,
|
||||
483700000,
|
||||
483900000,
|
||||
484100000,
|
||||
484300000,
|
||||
484500000,
|
||||
]
|
||||
@ -1,40 +0,0 @@
|
||||
# See https://www.chirpstack.io/gateway-bridge/install/config/ for a full
|
||||
# configuration example and documentation.
|
||||
|
||||
[integration.mqtt.auth.generic]
|
||||
servers=["tcp://mosquitto:1883"]
|
||||
username=""
|
||||
password=""
|
||||
|
||||
[integration.mqtt]
|
||||
event_topic_template="cn470_9/gateway/{{ .GatewayID }}/event/{{ .EventType }}"
|
||||
state_topic_template="cn470_9/gateway/{{ .GatewayID }}/state/{{ .StateType }}"
|
||||
command_topic_template="cn470_9/gateway/{{ .GatewayID }}/command/#"
|
||||
|
||||
[backend]
|
||||
type="basic_station"
|
||||
|
||||
[backend.basic_station]
|
||||
bind=":3001"
|
||||
tls_cert=""
|
||||
tls_key=""
|
||||
ca_cert=""
|
||||
|
||||
region="CN470"
|
||||
frequency_min=470000000
|
||||
frequency_max=510000000
|
||||
|
||||
|
||||
[[backend.basic_station.concentrators]]
|
||||
|
||||
[backend.basic_station.concentrators.multi_sf]
|
||||
frequencies=[
|
||||
484700000,
|
||||
484900000,
|
||||
485100000,
|
||||
485300000,
|
||||
485500000,
|
||||
485700000,
|
||||
485900000,
|
||||
486100000,
|
||||
]
|
||||
@ -1,35 +0,0 @@
|
||||
# See https://www.chirpstack.io/gateway-bridge/install/config/ for a full
|
||||
# configuration example and documentation.
|
||||
|
||||
[integration.mqtt.auth.generic]
|
||||
servers=["tcp://mosquitto:1883"]
|
||||
username=""
|
||||
password=""
|
||||
|
||||
[integration.mqtt]
|
||||
event_topic_template="eu433/gateway/{{ .GatewayID }}/event/{{ .EventType }}"
|
||||
state_topic_template="eu433/gateway/{{ .GatewayID }}/state/{{ .StateType }}"
|
||||
command_topic_template="eu433/gateway/{{ .GatewayID }}/command/#"
|
||||
|
||||
[backend]
|
||||
type="basic_station"
|
||||
|
||||
[backend.basic_station]
|
||||
bind=":3001"
|
||||
tls_cert=""
|
||||
tls_key=""
|
||||
ca_cert=""
|
||||
|
||||
region="EU433"
|
||||
frequency_min=433050000
|
||||
frequency_max=434900000
|
||||
|
||||
|
||||
[[backend.basic_station.concentrators]]
|
||||
|
||||
[backend.basic_station.concentrators.multi_sf]
|
||||
frequencies=[
|
||||
433175000,
|
||||
433375000,
|
||||
433575000,
|
||||
]
|
||||
@ -1,48 +0,0 @@
|
||||
# See https://www.chirpstack.io/gateway-bridge/install/config/ for a full
|
||||
# configuration example and documentation.
|
||||
|
||||
[integration.mqtt.auth.generic]
|
||||
servers=["tcp://mosquitto:1883"]
|
||||
username=""
|
||||
password=""
|
||||
|
||||
[integration.mqtt]
|
||||
event_topic_template="eu868/gateway/{{ .GatewayID }}/event/{{ .EventType }}"
|
||||
state_topic_template="eu868/gateway/{{ .GatewayID }}/state/{{ .StateType }}"
|
||||
command_topic_template="eu868/gateway/{{ .GatewayID }}/command/#"
|
||||
|
||||
[backend]
|
||||
type="basic_station"
|
||||
|
||||
[backend.basic_station]
|
||||
bind=":3001"
|
||||
tls_cert=""
|
||||
tls_key=""
|
||||
ca_cert=""
|
||||
|
||||
region="EU868"
|
||||
frequency_min=863000000
|
||||
frequency_max=870000000
|
||||
|
||||
|
||||
[[backend.basic_station.concentrators]]
|
||||
|
||||
[backend.basic_station.concentrators.multi_sf]
|
||||
frequencies=[
|
||||
868100000,
|
||||
868300000,
|
||||
868500000,
|
||||
867100000,
|
||||
867300000,
|
||||
867500000,
|
||||
867700000,
|
||||
867900000,
|
||||
]
|
||||
|
||||
[backend.basic_station.concentrators.lora_std]
|
||||
frequency=868300000
|
||||
bandwidth=250000
|
||||
spreading_factor=7
|
||||
|
||||
[backend.basic_station.concentrators.fsk]
|
||||
frequency=868800000
|
||||
@ -1,35 +0,0 @@
|
||||
# See https://www.chirpstack.io/gateway-bridge/install/config/ for a full
|
||||
# configuration example and documentation.
|
||||
|
||||
[integration.mqtt.auth.generic]
|
||||
servers=["tcp://mosquitto:1883"]
|
||||
username=""
|
||||
password=""
|
||||
|
||||
[integration.mqtt]
|
||||
event_topic_template="in865/gateway/{{ .GatewayID }}/event/{{ .EventType }}"
|
||||
state_topic_template="in865/gateway/{{ .GatewayID }}/state/{{ .StateType }}"
|
||||
command_topic_template="in865/gateway/{{ .GatewayID }}/command/#"
|
||||
|
||||
[backend]
|
||||
type="basic_station"
|
||||
|
||||
[backend.basic_station]
|
||||
bind=":3001"
|
||||
tls_cert=""
|
||||
tls_key=""
|
||||
ca_cert=""
|
||||
|
||||
region="IN865"
|
||||
frequency_min=865000000
|
||||
frequency_max=867000000
|
||||
|
||||
|
||||
[[backend.basic_station.concentrators]]
|
||||
|
||||
[backend.basic_station.concentrators.multi_sf]
|
||||
frequencies=[
|
||||
865062500,
|
||||
865402500,
|
||||
865985000,
|
||||
]
|
||||
@ -1,35 +0,0 @@
|
||||
# See https://www.chirpstack.io/gateway-bridge/install/config/ for a full
|
||||
# configuration example and documentation.
|
||||
|
||||
[integration.mqtt.auth.generic]
|
||||
servers=["tcp://mosquitto:1883"]
|
||||
username=""
|
||||
password=""
|
||||
|
||||
[integration.mqtt]
|
||||
event_topic_template="kr920/gateway/{{ .GatewayID }}/event/{{ .EventType }}"
|
||||
state_topic_template="kr920/gateway/{{ .GatewayID }}/state/{{ .StateType }}"
|
||||
command_topic_template="kr920/gateway/{{ .GatewayID }}/command/#"
|
||||
|
||||
[backend]
|
||||
type="basic_station"
|
||||
|
||||
[backend.basic_station]
|
||||
bind=":3001"
|
||||
tls_cert=""
|
||||
tls_key=""
|
||||
ca_cert=""
|
||||
|
||||
region="KR920"
|
||||
frequency_min=920900000
|
||||
frequency_max=923300000
|
||||
|
||||
|
||||
[[backend.basic_station.concentrators]]
|
||||
|
||||
[backend.basic_station.concentrators.multi_sf]
|
||||
frequencies=[
|
||||
922100000,
|
||||
922300000,
|
||||
922500000,
|
||||
]
|
||||
@ -1,34 +0,0 @@
|
||||
# See https://www.chirpstack.io/gateway-bridge/install/config/ for a full
|
||||
# configuration example and documentation.
|
||||
|
||||
[integration.mqtt.auth.generic]
|
||||
servers=["tcp://mosquitto:1883"]
|
||||
username=""
|
||||
password=""
|
||||
|
||||
[integration.mqtt]
|
||||
event_topic_template="ru864/gateway/{{ .GatewayID }}/event/{{ .EventType }}"
|
||||
state_topic_template="ru864/gateway/{{ .GatewayID }}/state/{{ .StateType }}"
|
||||
command_topic_template="ru864/gateway/{{ .GatewayID }}/command/#"
|
||||
|
||||
[backend]
|
||||
type="basic_station"
|
||||
|
||||
[backend.basic_station]
|
||||
bind=":3001"
|
||||
tls_cert=""
|
||||
tls_key=""
|
||||
ca_cert=""
|
||||
|
||||
region="RU864"
|
||||
frequency_min=863000000
|
||||
frequency_max=870000000
|
||||
|
||||
|
||||
[[backend.basic_station.concentrators]]
|
||||
|
||||
[backend.basic_station.concentrators.multi_sf]
|
||||
frequencies=[
|
||||
868900000,
|
||||
869100000,
|
||||
]
|
||||
@ -1,45 +0,0 @@
|
||||
# See https://www.chirpstack.io/gateway-bridge/install/config/ for a full
|
||||
# configuration example and documentation.
|
||||
|
||||
[integration.mqtt.auth.generic]
|
||||
servers=["tcp://mosquitto:1883"]
|
||||
username=""
|
||||
password=""
|
||||
|
||||
[integration.mqtt]
|
||||
event_topic_template="us915_0/gateway/{{ .GatewayID }}/event/{{ .EventType }}"
|
||||
state_topic_template="us915_0/gateway/{{ .GatewayID }}/state/{{ .StateType }}"
|
||||
command_topic_template="us915_0/gateway/{{ .GatewayID }}/command/#"
|
||||
|
||||
[backend]
|
||||
type="basic_station"
|
||||
|
||||
[backend.basic_station]
|
||||
bind=":3001"
|
||||
tls_cert=""
|
||||
tls_key=""
|
||||
ca_cert=""
|
||||
|
||||
region="US915"
|
||||
frequency_min=923000000
|
||||
frequency_max=928000000
|
||||
|
||||
|
||||
[[backend.basic_station.concentrators]]
|
||||
|
||||
[backend.basic_station.concentrators.multi_sf]
|
||||
frequencies=[
|
||||
902300000,
|
||||
902500000,
|
||||
902700000,
|
||||
902900000,
|
||||
903100000,
|
||||
903300000,
|
||||
903500000,
|
||||
903700000,
|
||||
]
|
||||
|
||||
[backend.basic_station.concentrators.lora_std]
|
||||
frequency=903000000
|
||||
bandwidth=500000
|
||||
spreading_factor=8
|
||||
@ -1,45 +0,0 @@
|
||||
# See https://www.chirpstack.io/gateway-bridge/install/config/ for a full
|
||||
# configuration example and documentation.
|
||||
|
||||
[integration.mqtt.auth.generic]
|
||||
servers=["tcp://mosquitto:1883"]
|
||||
username=""
|
||||
password=""
|
||||
|
||||
[integration.mqtt]
|
||||
event_topic_template="us915_1/gateway/{{ .GatewayID }}/event/{{ .EventType }}"
|
||||
state_topic_template="us915_1/gateway/{{ .GatewayID }}/state/{{ .StateType }}"
|
||||
command_topic_template="us915_1/gateway/{{ .GatewayID }}/command/#"
|
||||
|
||||
[backend]
|
||||
type="basic_station"
|
||||
|
||||
[backend.basic_station]
|
||||
bind=":3001"
|
||||
tls_cert=""
|
||||
tls_key=""
|
||||
ca_cert=""
|
||||
|
||||
region="US915"
|
||||
frequency_min=923000000
|
||||
frequency_max=928000000
|
||||
|
||||
|
||||
[[backend.basic_station.concentrators]]
|
||||
|
||||
[backend.basic_station.concentrators.multi_sf]
|
||||
frequencies=[
|
||||
903900000,
|
||||
904100000,
|
||||
904300000,
|
||||
904500000,
|
||||
904700000,
|
||||
904900000,
|
||||
905100000,
|
||||
905300000,
|
||||
]
|
||||
|
||||
[backend.basic_station.concentrators.lora_std]
|
||||
frequency=904600000
|
||||
bandwidth=500000
|
||||
spreading_factor=8
|
||||
@ -1,45 +0,0 @@
|
||||
# See https://www.chirpstack.io/gateway-bridge/install/config/ for a full
|
||||
# configuration example and documentation.
|
||||
|
||||
[integration.mqtt.auth.generic]
|
||||
servers=["tcp://mosquitto:1883"]
|
||||
username=""
|
||||
password=""
|
||||
|
||||
[integration.mqtt]
|
||||
event_topic_template="us915_2/gateway/{{ .GatewayID }}/event/{{ .EventType }}"
|
||||
state_topic_template="us915_2/gateway/{{ .GatewayID }}/state/{{ .StateType }}"
|
||||
command_topic_template="us915_2/gateway/{{ .GatewayID }}/command/#"
|
||||
|
||||
[backend]
|
||||
type="basic_station"
|
||||
|
||||
[backend.basic_station]
|
||||
bind=":3001"
|
||||
tls_cert=""
|
||||
tls_key=""
|
||||
ca_cert=""
|
||||
|
||||
region="US915"
|
||||
frequency_min=923000000
|
||||
frequency_max=928000000
|
||||
|
||||
|
||||
[[backend.basic_station.concentrators]]
|
||||
|
||||
[backend.basic_station.concentrators.multi_sf]
|
||||
frequencies=[
|
||||
905500000,
|
||||
905700000,
|
||||
905900000,
|
||||
906100000,
|
||||
906300000,
|
||||
906500000,
|
||||
906700000,
|
||||
906900000,
|
||||
]
|
||||
|
||||
[backend.basic_station.concentrators.lora_std]
|
||||
frequency=906200000
|
||||
bandwidth=500000
|
||||
spreading_factor=8
|
||||
@ -1,45 +0,0 @@
|
||||
# See https://www.chirpstack.io/gateway-bridge/install/config/ for a full
|
||||
# configuration example and documentation.
|
||||
|
||||
[integration.mqtt.auth.generic]
|
||||
servers=["tcp://mosquitto:1883"]
|
||||
username=""
|
||||
password=""
|
||||
|
||||
[integration.mqtt]
|
||||
event_topic_template="us915_3/gateway/{{ .GatewayID }}/event/{{ .EventType }}"
|
||||
state_topic_template="us915_3/gateway/{{ .GatewayID }}/state/{{ .StateType }}"
|
||||
command_topic_template="us915_3/gateway/{{ .GatewayID }}/command/#"
|
||||
|
||||
[backend]
|
||||
type="basic_station"
|
||||
|
||||
[backend.basic_station]
|
||||
bind=":3001"
|
||||
tls_cert=""
|
||||
tls_key=""
|
||||
ca_cert=""
|
||||
|
||||
region="US915"
|
||||
frequency_min=923000000
|
||||
frequency_max=928000000
|
||||
|
||||
|
||||
[[backend.basic_station.concentrators]]
|
||||
|
||||
[backend.basic_station.concentrators.multi_sf]
|
||||
frequencies=[
|
||||
907100000,
|
||||
907300000,
|
||||
907500000,
|
||||
907700000,
|
||||
907900000,
|
||||
908100000,
|
||||
908300000,
|
||||
908500000,
|
||||
]
|
||||
|
||||
[backend.basic_station.concentrators.lora_std]
|
||||
frequency=907800000
|
||||
bandwidth=500000
|
||||
spreading_factor=8
|
||||
@ -1,45 +0,0 @@
|
||||
# See https://www.chirpstack.io/gateway-bridge/install/config/ for a full
|
||||
# configuration example and documentation.
|
||||
|
||||
[integration.mqtt.auth.generic]
|
||||
servers=["tcp://mosquitto:1883"]
|
||||
username=""
|
||||
password=""
|
||||
|
||||
[integration.mqtt]
|
||||
event_topic_template="us915_4/gateway/{{ .GatewayID }}/event/{{ .EventType }}"
|
||||
state_topic_template="us915_4/gateway/{{ .GatewayID }}/state/{{ .StateType }}"
|
||||
command_topic_template="us915_4/gateway/{{ .GatewayID }}/command/#"
|
||||
|
||||
[backend]
|
||||
type="basic_station"
|
||||
|
||||
[backend.basic_station]
|
||||
bind=":3001"
|
||||
tls_cert=""
|
||||
tls_key=""
|
||||
ca_cert=""
|
||||
|
||||
region="US915"
|
||||
frequency_min=923000000
|
||||
frequency_max=928000000
|
||||
|
||||
|
||||
[[backend.basic_station.concentrators]]
|
||||
|
||||
[backend.basic_station.concentrators.multi_sf]
|
||||
frequencies=[
|
||||
908700000,
|
||||
908900000,
|
||||
909100000,
|
||||
909300000,
|
||||
909500000,
|
||||
909700000,
|
||||
909900000,
|
||||
910100000,
|
||||
]
|
||||
|
||||
[backend.basic_station.concentrators.lora_std]
|
||||
frequency=909400000
|
||||
bandwidth=500000
|
||||
spreading_factor=8
|
||||
@ -1,45 +0,0 @@
|
||||
# See https://www.chirpstack.io/gateway-bridge/install/config/ for a full
|
||||
# configuration example and documentation.
|
||||
|
||||
[integration.mqtt.auth.generic]
|
||||
servers=["tcp://mosquitto:1883"]
|
||||
username=""
|
||||
password=""
|
||||
|
||||
[integration.mqtt]
|
||||
event_topic_template="us915_5/gateway/{{ .GatewayID }}/event/{{ .EventType }}"
|
||||
state_topic_template="us915_5/gateway/{{ .GatewayID }}/state/{{ .StateType }}"
|
||||
command_topic_template="us915_5/gateway/{{ .GatewayID }}/command/#"
|
||||
|
||||
[backend]
|
||||
type="basic_station"
|
||||
|
||||
[backend.basic_station]
|
||||
bind=":3001"
|
||||
tls_cert=""
|
||||
tls_key=""
|
||||
ca_cert=""
|
||||
|
||||
region="US915"
|
||||
frequency_min=923000000
|
||||
frequency_max=928000000
|
||||
|
||||
|
||||
[[backend.basic_station.concentrators]]
|
||||
|
||||
[backend.basic_station.concentrators.multi_sf]
|
||||
frequencies=[
|
||||
910300000,
|
||||
910500000,
|
||||
910700000,
|
||||
910900000,
|
||||
911100000,
|
||||
911300000,
|
||||
911500000,
|
||||
911700000,
|
||||
]
|
||||
|
||||
[backend.basic_station.concentrators.lora_std]
|
||||
frequency=911000000
|
||||
bandwidth=500000
|
||||
spreading_factor=8
|
||||
@ -1,45 +0,0 @@
|
||||
# See https://www.chirpstack.io/gateway-bridge/install/config/ for a full
|
||||
# configuration example and documentation.
|
||||
|
||||
[integration.mqtt.auth.generic]
|
||||
servers=["tcp://mosquitto:1883"]
|
||||
username=""
|
||||
password=""
|
||||
|
||||
[integration.mqtt]
|
||||
event_topic_template="us915_6/gateway/{{ .GatewayID }}/event/{{ .EventType }}"
|
||||
state_topic_template="us915_6/gateway/{{ .GatewayID }}/state/{{ .StateType }}"
|
||||
command_topic_template="us915_6/gateway/{{ .GatewayID }}/command/#"
|
||||
|
||||
[backend]
|
||||
type="basic_station"
|
||||
|
||||
[backend.basic_station]
|
||||
bind=":3001"
|
||||
tls_cert=""
|
||||
tls_key=""
|
||||
ca_cert=""
|
||||
|
||||
region="US915"
|
||||
frequency_min=923000000
|
||||
frequency_max=928000000
|
||||
|
||||
|
||||
[[backend.basic_station.concentrators]]
|
||||
|
||||
[backend.basic_station.concentrators.multi_sf]
|
||||
frequencies=[
|
||||
911900000,
|
||||
912100000,
|
||||
912300000,
|
||||
912500000,
|
||||
912700000,
|
||||
912900000,
|
||||
913100000,
|
||||
913300000,
|
||||
]
|
||||
|
||||
[backend.basic_station.concentrators.lora_std]
|
||||
frequency=912600000
|
||||
bandwidth=500000
|
||||
spreading_factor=8
|
||||
@ -1,45 +0,0 @@
|
||||
# See https://www.chirpstack.io/gateway-bridge/install/config/ for a full
|
||||
# configuration example and documentation.
|
||||
|
||||
[integration.mqtt.auth.generic]
|
||||
servers=["tcp://mosquitto:1883"]
|
||||
username=""
|
||||
password=""
|
||||
|
||||
[integration.mqtt]
|
||||
event_topic_template="us915_7/gateway/{{ .GatewayID }}/event/{{ .EventType }}"
|
||||
state_topic_template="us915_7/gateway/{{ .GatewayID }}/state/{{ .StateType }}"
|
||||
command_topic_template="us915_7/gateway/{{ .GatewayID }}/command/#"
|
||||
|
||||
[backend]
|
||||
type="basic_station"
|
||||
|
||||
[backend.basic_station]
|
||||
bind=":3001"
|
||||
tls_cert=""
|
||||
tls_key=""
|
||||
ca_cert=""
|
||||
|
||||
region="US915"
|
||||
frequency_min=923000000
|
||||
frequency_max=928000000
|
||||
|
||||
|
||||
[[backend.basic_station.concentrators]]
|
||||
|
||||
[backend.basic_station.concentrators.multi_sf]
|
||||
frequencies=[
|
||||
913500000,
|
||||
913700000,
|
||||
913900000,
|
||||
914100000,
|
||||
914300000,
|
||||
914500000,
|
||||
914700000,
|
||||
914900000,
|
||||
]
|
||||
|
||||
[backend.basic_station.concentrators.lora_std]
|
||||
frequency=914200000
|
||||
bandwidth=500000
|
||||
spreading_factor=8
|
||||
@ -5,3 +5,8 @@
|
||||
servers=["tcp://mosquitto:1883"]
|
||||
username=""
|
||||
password=""
|
||||
|
||||
[integration.mqtt]
|
||||
event_topic_template="eu868/gateway/{{ .GatewayID }}/event/{{ .EventType }}"
|
||||
state_topic_template="eu868/gateway/{{ .GatewayID }}/state/{{ .StateType }}"
|
||||
command_topic_template="eu868/gateway/{{ .GatewayID }}/command/#"
|
||||
|
||||
@ -1,11 +1,8 @@
|
||||
# This file contains an example AS923 configuration.
|
||||
[[regions]]
|
||||
|
||||
# ID is an user-defined identifier for this region.
|
||||
id="as923"
|
||||
|
||||
# Description is a short description for this region.
|
||||
description="AS923"
|
||||
# Name is an user-defined identifier for this region.
|
||||
name="as923"
|
||||
|
||||
# Common-name refers to the common-name of this region as defined by
|
||||
# the LoRa Alliance.
|
||||
@ -30,15 +27,14 @@
|
||||
# MQTT configuration.
|
||||
[regions.gateway.backend.mqtt]
|
||||
|
||||
# Topic prefix.
|
||||
#
|
||||
# The topic prefix can be used to define the region of the gateway.
|
||||
# Note, there is no need to add a trailing '/' to the prefix. The trailing
|
||||
# '/' is automatically added to the prefix if it is configured.
|
||||
topic_prefix="as923"
|
||||
# Event topic template.
|
||||
event_topic="as923/gateway/+/event/+"
|
||||
|
||||
# Command topic template.
|
||||
command_topic="as923/gateway/{{ gateway_id }}/command/{{ command }}"
|
||||
|
||||
# MQTT server (e.g. scheme://host:port where scheme is tcp, ssl or ws)
|
||||
server="tcp://$MQTT_BROKER_HOST:1883"
|
||||
server="tcp://mosquitto:1883"
|
||||
|
||||
# Connect with the given username (optional)
|
||||
username=""
|
||||
@ -61,21 +57,15 @@
|
||||
# Set the "clean session" flag in the connect message when this client
|
||||
# connects to an MQTT broker. By setting this flag you are indicating
|
||||
# that no messages saved by the broker for this client should be delivered.
|
||||
clean_session=false
|
||||
clean_session=true
|
||||
|
||||
# Client ID
|
||||
#
|
||||
# Set the client id to be used by this client when connecting to the MQTT
|
||||
# broker. A client id must be no longer than 23 characters. If left blank,
|
||||
# a random id will be generated by ChirpStack.
|
||||
# broker. A client id must be no longer than 23 characters. When left blank,
|
||||
# a random id will be generated. This requires clean_session=true.
|
||||
client_id=""
|
||||
|
||||
# Keep alive interval.
|
||||
#
|
||||
# This defines the maximum time that that should pass without communication
|
||||
# between the client and server.
|
||||
keep_alive_interval="30s"
|
||||
|
||||
# CA certificate file (optional)
|
||||
#
|
||||
# Use this when setting up a secure connection (when server uses ssl://...)
|
||||
@ -195,7 +185,7 @@
|
||||
[regions.network.class_b]
|
||||
|
||||
# Ping-slot data-rate.
|
||||
ping_slot_dr=3
|
||||
ping_slot_dr=0
|
||||
|
||||
# Ping-slot frequency (Hz)
|
||||
#
|
||||
@ -1,11 +1,8 @@
|
||||
# This file contains an example AS923_2 configuration.
|
||||
[[regions]]
|
||||
|
||||
# ID is an user-defined identifier for this region.
|
||||
id="as923_2"
|
||||
|
||||
# Description is a short description for this region.
|
||||
description="AS923-2"
|
||||
# Name is an user-defined identifier for this region.
|
||||
name="as923_2"
|
||||
|
||||
# Common-name refers to the common-name of this region as defined by
|
||||
# the LoRa Alliance.
|
||||
@ -30,15 +27,14 @@
|
||||
# MQTT configuration.
|
||||
[regions.gateway.backend.mqtt]
|
||||
|
||||
# Topic prefix.
|
||||
#
|
||||
# The topic prefix can be used to define the region of the gateway.
|
||||
# Note, there is no need to add a trailing '/' to the prefix. The trailing
|
||||
# '/' is automatically added to the prefix if it is configured.
|
||||
topic_prefix="as923_2"
|
||||
# Event topic template.
|
||||
event_topic="as923_2/gateway/+/event/+"
|
||||
|
||||
# Command topic template.
|
||||
command_topic="as923_2/gateway/{{ gateway_id }}/command/{{ command }}"
|
||||
|
||||
# MQTT server (e.g. scheme://host:port where scheme is tcp, ssl or ws)
|
||||
server="tcp://$MQTT_BROKER_HOST:1883"
|
||||
server="tcp://mosquitto:1883"
|
||||
|
||||
# Connect with the given username (optional)
|
||||
username=""
|
||||
@ -61,21 +57,15 @@
|
||||
# Set the "clean session" flag in the connect message when this client
|
||||
# connects to an MQTT broker. By setting this flag you are indicating
|
||||
# that no messages saved by the broker for this client should be delivered.
|
||||
clean_session=false
|
||||
clean_session=true
|
||||
|
||||
# Client ID
|
||||
#
|
||||
# Set the client id to be used by this client when connecting to the MQTT
|
||||
# broker. A client id must be no longer than 23 characters. If left blank,
|
||||
# a random id will be generated by ChirpStack.
|
||||
# broker. A client id must be no longer than 23 characters. When left blank,
|
||||
# a random id will be generated. This requires clean_session=true.
|
||||
client_id=""
|
||||
|
||||
# Keep alive interval.
|
||||
#
|
||||
# This defines the maximum time that that should pass without communication
|
||||
# between the client and server.
|
||||
keep_alive_interval="30s"
|
||||
|
||||
# CA certificate file (optional)
|
||||
#
|
||||
# Use this when setting up a secure connection (when server uses ssl://...)
|
||||
@ -195,7 +185,7 @@
|
||||
[regions.network.class_b]
|
||||
|
||||
# Ping-slot data-rate.
|
||||
ping_slot_dr=3
|
||||
ping_slot_dr=0
|
||||
|
||||
# Ping-slot frequency (Hz)
|
||||
#
|
||||
@ -1,11 +1,8 @@
|
||||
# This file contains an example AS923_3 configuration.
|
||||
[[regions]]
|
||||
|
||||
# ID is an user-defined identifier for this region.
|
||||
id="as923_3"
|
||||
|
||||
# Description is a short description for this region.
|
||||
description="AS923-3"
|
||||
# Name is an user-defined identifier for this region.
|
||||
name="as923_3"
|
||||
|
||||
# Common-name refers to the common-name of this region as defined by
|
||||
# the LoRa Alliance.
|
||||
@ -30,15 +27,14 @@
|
||||
# MQTT configuration.
|
||||
[regions.gateway.backend.mqtt]
|
||||
|
||||
# Topic prefix.
|
||||
#
|
||||
# The topic prefix can be used to define the region of the gateway.
|
||||
# Note, there is no need to add a trailing '/' to the prefix. The trailing
|
||||
# '/' is automatically added to the prefix if it is configured.
|
||||
topic_prefix="as923_3"
|
||||
# Event topic template.
|
||||
event_topic="as923_3/gateway/+/event/+"
|
||||
|
||||
# Command topic template.
|
||||
command_topic="as923_3/gateway/{{ gateway_id }}/command/{{ command }}"
|
||||
|
||||
# MQTT server (e.g. scheme://host:port where scheme is tcp, ssl or ws)
|
||||
server="tcp://$MQTT_BROKER_HOST:1883"
|
||||
server="tcp://mosquitto:1883"
|
||||
|
||||
# Connect with the given username (optional)
|
||||
username=""
|
||||
@ -61,21 +57,15 @@
|
||||
# Set the "clean session" flag in the connect message when this client
|
||||
# connects to an MQTT broker. By setting this flag you are indicating
|
||||
# that no messages saved by the broker for this client should be delivered.
|
||||
clean_session=false
|
||||
clean_session=true
|
||||
|
||||
# Client ID
|
||||
#
|
||||
# Set the client id to be used by this client when connecting to the MQTT
|
||||
# broker. A client id must be no longer than 23 characters. If left blank,
|
||||
# a random id will be generated by ChirpStack.
|
||||
# broker. A client id must be no longer than 23 characters. When left blank,
|
||||
# a random id will be generated. This requires clean_session=true.
|
||||
client_id=""
|
||||
|
||||
# Keep alive interval.
|
||||
#
|
||||
# This defines the maximum time that that should pass without communication
|
||||
# between the client and server.
|
||||
keep_alive_interval="30s"
|
||||
|
||||
# CA certificate file (optional)
|
||||
#
|
||||
# Use this when setting up a secure connection (when server uses ssl://...)
|
||||
@ -195,7 +185,7 @@
|
||||
[regions.network.class_b]
|
||||
|
||||
# Ping-slot data-rate.
|
||||
ping_slot_dr=3
|
||||
ping_slot_dr=0
|
||||
|
||||
# Ping-slot frequency (Hz)
|
||||
#
|
||||
@ -1,11 +1,8 @@
|
||||
# This file contains an example AS923_4 configuration.
|
||||
[[regions]]
|
||||
|
||||
# ID is an user-defined identifier for this region.
|
||||
id="as923_4"
|
||||
|
||||
# Description is a short description for this region.
|
||||
description="AS923-4"
|
||||
# Name is an user-defined identifier for this region.
|
||||
name="as923_4"
|
||||
|
||||
# Common-name refers to the common-name of this region as defined by
|
||||
# the LoRa Alliance.
|
||||
@ -30,15 +27,14 @@
|
||||
# MQTT configuration.
|
||||
[regions.gateway.backend.mqtt]
|
||||
|
||||
# Topic prefix.
|
||||
#
|
||||
# The topic prefix can be used to define the region of the gateway.
|
||||
# Note, there is no need to add a trailing '/' to the prefix. The trailing
|
||||
# '/' is automatically added to the prefix if it is configured.
|
||||
topic_prefix="as923_4"
|
||||
# Event topic template.
|
||||
event_topic="as923_4/gateway/+/event/+"
|
||||
|
||||
# Command topic template.
|
||||
command_topic="as923_4/gateway/{{ gateway_id }}/command/{{ command }}"
|
||||
|
||||
# MQTT server (e.g. scheme://host:port where scheme is tcp, ssl or ws)
|
||||
server="tcp://$MQTT_BROKER_HOST:1883"
|
||||
server="tcp://mosquitto:1883"
|
||||
|
||||
# Connect with the given username (optional)
|
||||
username=""
|
||||
@ -61,21 +57,15 @@
|
||||
# Set the "clean session" flag in the connect message when this client
|
||||
# connects to an MQTT broker. By setting this flag you are indicating
|
||||
# that no messages saved by the broker for this client should be delivered.
|
||||
clean_session=false
|
||||
clean_session=true
|
||||
|
||||
# Client ID
|
||||
#
|
||||
# Set the client id to be used by this client when connecting to the MQTT
|
||||
# broker. A client id must be no longer than 23 characters. If left blank,
|
||||
# a random id will be generated by ChirpStack.
|
||||
# broker. A client id must be no longer than 23 characters. When left blank,
|
||||
# a random id will be generated. This requires clean_session=true.
|
||||
client_id=""
|
||||
|
||||
# Keep alive interval.
|
||||
#
|
||||
# This defines the maximum time that that should pass without communication
|
||||
# between the client and server.
|
||||
keep_alive_interval="30s"
|
||||
|
||||
# CA certificate file (optional)
|
||||
#
|
||||
# Use this when setting up a secure connection (when server uses ssl://...)
|
||||
@ -195,7 +185,7 @@
|
||||
[regions.network.class_b]
|
||||
|
||||
# Ping-slot data-rate.
|
||||
ping_slot_dr=3
|
||||
ping_slot_dr=0
|
||||
|
||||
# Ping-slot frequency (Hz)
|
||||
#
|
||||
@ -1,11 +1,8 @@
|
||||
# This file contains an example AU915 example (channels 0-7 + 64).
|
||||
[[regions]]
|
||||
|
||||
# ID is an use-defined identifier for this region.
|
||||
id="au915_0"
|
||||
|
||||
# Description is a short description for this region.
|
||||
description="AU915 (channels 0-7 + 64)"
|
||||
# Name is an use-defined identifier for this region.
|
||||
name="au915_0"
|
||||
|
||||
# Common-name refers to the common-name of this region as defined by
|
||||
# the LoRa Alliance.
|
||||
@ -30,15 +27,14 @@
|
||||
# MQTT configuration.
|
||||
[regions.gateway.backend.mqtt]
|
||||
|
||||
# Topic prefix.
|
||||
#
|
||||
# The topic prefix can be used to define the region of the gateway.
|
||||
# Note, there is no need to add a trailing '/' to the prefix. The trailing
|
||||
# '/' is automatically added to the prefix if it is configured.
|
||||
topic_prefix="au915_0"
|
||||
# Event topic template.
|
||||
event_topic="au915_0/gateway/+/event/+"
|
||||
|
||||
# Command topic template.
|
||||
command_topic="au915_0/gateway/{{ gateway_id }}/command/{{ command }}"
|
||||
|
||||
# MQTT server (e.g. scheme://host:port where scheme is tcp, ssl or ws)
|
||||
server="tcp://$MQTT_BROKER_HOST:1883"
|
||||
server="tcp://mosquitto:1883"
|
||||
|
||||
# Connect with the given username (optional)
|
||||
username=""
|
||||
@ -61,21 +57,15 @@
|
||||
# Set the "clean session" flag in the connect message when this client
|
||||
# connects to an MQTT broker. By setting this flag you are indicating
|
||||
# that no messages saved by the broker for this client should be delivered.
|
||||
clean_session=false
|
||||
clean_session=true
|
||||
|
||||
# Client ID
|
||||
#
|
||||
# Set the client id to be used by this client when connecting to the MQTT
|
||||
# broker. A client id must be no longer than 23 characters. If left blank,
|
||||
# a random id will be generated by ChirpStack.
|
||||
# broker. A client id must be no longer than 23 characters. When left blank,
|
||||
# a random id will be generated. This requires clean_session=true.
|
||||
client_id=""
|
||||
|
||||
# Keep alive interval.
|
||||
#
|
||||
# This defines the maximum time that that should pass without communication
|
||||
# between the client and server.
|
||||
keep_alive_interval="30s"
|
||||
|
||||
# CA certificate file (optional)
|
||||
#
|
||||
# Use this when setting up a secure connection (when server uses ssl://...)
|
||||
@ -1,11 +1,8 @@
|
||||
# This file contains an example AU915 example (channels 8-15 + 65).
|
||||
[[regions]]
|
||||
|
||||
# ID is an use-defined identifier for this region.
|
||||
id="au915_1"
|
||||
|
||||
# Description is a short description for this region.
|
||||
description="AU915 (channels 8-15 + 65)"
|
||||
# Name is an use-defined identifier for this region.
|
||||
name="au915_1"
|
||||
|
||||
# Common-name refers to the common-name of this region as defined by
|
||||
# the LoRa Alliance.
|
||||
@ -30,15 +27,14 @@
|
||||
# MQTT configuration.
|
||||
[regions.gateway.backend.mqtt]
|
||||
|
||||
# Topic prefix.
|
||||
#
|
||||
# The topic prefix can be used to define the region of the gateway.
|
||||
# Note, there is no need to add a trailing '/' to the prefix. The trailing
|
||||
# '/' is automatically added to the prefix if it is configured.
|
||||
topic_prefix="au915_1"
|
||||
# Event topic template.
|
||||
event_topic="au915_1/gateway/+/event/+"
|
||||
|
||||
# Command topic template.
|
||||
command_topic="au915_1/gateway/{{ gateway_id }}/command/{{ command }}"
|
||||
|
||||
# MQTT server (e.g. scheme://host:port where scheme is tcp, ssl or ws)
|
||||
server="tcp://$MQTT_BROKER_HOST:1883"
|
||||
server="tcp://mosquitto:1883"
|
||||
|
||||
# Connect with the given username (optional)
|
||||
username=""
|
||||
@ -61,21 +57,15 @@
|
||||
# Set the "clean session" flag in the connect message when this client
|
||||
# connects to an MQTT broker. By setting this flag you are indicating
|
||||
# that no messages saved by the broker for this client should be delivered.
|
||||
clean_session=false
|
||||
clean_session=true
|
||||
|
||||
# Client ID
|
||||
#
|
||||
# Set the client id to be used by this client when connecting to the MQTT
|
||||
# broker. A client id must be no longer than 23 characters. If left blank,
|
||||
# a random id will be generated by ChirpStack.
|
||||
# broker. A client id must be no longer than 23 characters. When left blank,
|
||||
# a random id will be generated. This requires clean_session=true.
|
||||
client_id=""
|
||||
|
||||
# Keep alive interval.
|
||||
#
|
||||
# This defines the maximum time that that should pass without communication
|
||||
# between the client and server.
|
||||
keep_alive_interval="30s"
|
||||
|
||||
# CA certificate file (optional)
|
||||
#
|
||||
# Use this when setting up a secure connection (when server uses ssl://...)
|
||||
@ -1,11 +1,8 @@
|
||||
# This file contains an example AU915 example (channels 16-23 + 66).
|
||||
[[regions]]
|
||||
|
||||
# ID is an use-defined identifier for this region.
|
||||
id="au915_2"
|
||||
|
||||
# Description is a short description for this region.
|
||||
description="AU915 (channels 16-23 + 65)"
|
||||
# Name is an use-defined identifier for this region.
|
||||
name="au915_2"
|
||||
|
||||
# Common-name refers to the common-name of this region as defined by
|
||||
# the LoRa Alliance.
|
||||
@ -30,15 +27,14 @@
|
||||
# MQTT configuration.
|
||||
[regions.gateway.backend.mqtt]
|
||||
|
||||
# Topic prefix.
|
||||
#
|
||||
# The topic prefix can be used to define the region of the gateway.
|
||||
# Note, there is no need to add a trailing '/' to the prefix. The trailing
|
||||
# '/' is automatically added to the prefix if it is configured.
|
||||
topic_prefix="au915_2"
|
||||
# Event topic template.
|
||||
event_topic="au915_2/gateway/+/event/+"
|
||||
|
||||
# Command topic template.
|
||||
command_topic="au915_2/gateway/{{ gateway_id }}/command/{{ command }}"
|
||||
|
||||
# MQTT server (e.g. scheme://host:port where scheme is tcp, ssl or ws)
|
||||
server="tcp://$MQTT_BROKER_HOST:1883"
|
||||
server="tcp://mosquitto:1883"
|
||||
|
||||
# Connect with the given username (optional)
|
||||
username=""
|
||||
@ -61,21 +57,15 @@
|
||||
# Set the "clean session" flag in the connect message when this client
|
||||
# connects to an MQTT broker. By setting this flag you are indicating
|
||||
# that no messages saved by the broker for this client should be delivered.
|
||||
clean_session=false
|
||||
clean_session=true
|
||||
|
||||
# Client ID
|
||||
#
|
||||
# Set the client id to be used by this client when connecting to the MQTT
|
||||
# broker. A client id must be no longer than 23 characters. If left blank,
|
||||
# a random id will be generated by ChirpStack.
|
||||
# broker. A client id must be no longer than 23 characters. When left blank,
|
||||
# a random id will be generated. This requires clean_session=true.
|
||||
client_id=""
|
||||
|
||||
# Keep alive interval.
|
||||
#
|
||||
# This defines the maximum time that that should pass without communication
|
||||
# between the client and server.
|
||||
keep_alive_interval="30s"
|
||||
|
||||
# CA certificate file (optional)
|
||||
#
|
||||
# Use this when setting up a secure connection (when server uses ssl://...)
|
||||
@ -1,11 +1,8 @@
|
||||
# This file contains an example AU915 example (channels 24-31 + 67).
|
||||
[[regions]]
|
||||
|
||||
# ID is an use-defined identifier for this region.
|
||||
id="au915_3"
|
||||
|
||||
# Description is a short description for this region.
|
||||
description="AU915 (channels 24-31 + 67)"
|
||||
# Name is an use-defined identifier for this region.
|
||||
name="au915_3"
|
||||
|
||||
# Common-name refers to the common-name of this region as defined by
|
||||
# the LoRa Alliance.
|
||||
@ -30,15 +27,14 @@
|
||||
# MQTT configuration.
|
||||
[regions.gateway.backend.mqtt]
|
||||
|
||||
# Topic prefix.
|
||||
#
|
||||
# The topic prefix can be used to define the region of the gateway.
|
||||
# Note, there is no need to add a trailing '/' to the prefix. The trailing
|
||||
# '/' is automatically added to the prefix if it is configured.
|
||||
topic_prefix="au915_3"
|
||||
# Event topic template.
|
||||
event_topic="au915_3/gateway/+/event/+"
|
||||
|
||||
# Command topic template.
|
||||
command_topic="au915_3/gateway/{{ gateway_id }}/command/{{ command }}"
|
||||
|
||||
# MQTT server (e.g. scheme://host:port where scheme is tcp, ssl or ws)
|
||||
server="tcp://$MQTT_BROKER_HOST:1883"
|
||||
server="tcp://mosquitto:1883"
|
||||
|
||||
# Connect with the given username (optional)
|
||||
username=""
|
||||
@ -61,21 +57,15 @@
|
||||
# Set the "clean session" flag in the connect message when this client
|
||||
# connects to an MQTT broker. By setting this flag you are indicating
|
||||
# that no messages saved by the broker for this client should be delivered.
|
||||
clean_session=false
|
||||
clean_session=true
|
||||
|
||||
# Client ID
|
||||
#
|
||||
# Set the client id to be used by this client when connecting to the MQTT
|
||||
# broker. A client id must be no longer than 23 characters. If left blank,
|
||||
# a random id will be generated by ChirpStack.
|
||||
# broker. A client id must be no longer than 23 characters. When left blank,
|
||||
# a random id will be generated. This requires clean_session=true.
|
||||
client_id=""
|
||||
|
||||
# Keep alive interval.
|
||||
#
|
||||
# This defines the maximum time that that should pass without communication
|
||||
# between the client and server.
|
||||
keep_alive_interval="30s"
|
||||
|
||||
# CA certificate file (optional)
|
||||
#
|
||||
# Use this when setting up a secure connection (when server uses ssl://...)
|
||||
@ -1,11 +1,8 @@
|
||||
# This file contains an example AU915 example (channels 32-39 + 68).
|
||||
[[regions]]
|
||||
|
||||
# ID is an use-defined identifier for this region.
|
||||
id="au915_4"
|
||||
|
||||
# Description is a short description for this region.
|
||||
description="AU915 (channels 32-39 + 68)"
|
||||
# Name is an use-defined identifier for this region.
|
||||
name="au915_4"
|
||||
|
||||
# Common-name refers to the common-name of this region as defined by
|
||||
# the LoRa Alliance.
|
||||
@ -30,15 +27,14 @@
|
||||
# MQTT configuration.
|
||||
[regions.gateway.backend.mqtt]
|
||||
|
||||
# Topic prefix.
|
||||
#
|
||||
# The topic prefix can be used to define the region of the gateway.
|
||||
# Note, there is no need to add a trailing '/' to the prefix. The trailing
|
||||
# '/' is automatically added to the prefix if it is configured.
|
||||
topic_prefix="au915_4"
|
||||
# Event topic template.
|
||||
event_topic="au915_4/gateway/+/event/+"
|
||||
|
||||
# Command topic template.
|
||||
command_topic="au915_4/gateway/{{ gateway_id }}/command/{{ command }}"
|
||||
|
||||
# MQTT server (e.g. scheme://host:port where scheme is tcp, ssl or ws)
|
||||
server="tcp://$MQTT_BROKER_HOST:1883"
|
||||
server="tcp://mosquitto:1883"
|
||||
|
||||
# Connect with the given username (optional)
|
||||
username=""
|
||||
@ -61,21 +57,15 @@
|
||||
# Set the "clean session" flag in the connect message when this client
|
||||
# connects to an MQTT broker. By setting this flag you are indicating
|
||||
# that no messages saved by the broker for this client should be delivered.
|
||||
clean_session=false
|
||||
clean_session=true
|
||||
|
||||
# Client ID
|
||||
#
|
||||
# Set the client id to be used by this client when connecting to the MQTT
|
||||
# broker. A client id must be no longer than 23 characters. If left blank,
|
||||
# a random id will be generated by ChirpStack.
|
||||
# broker. A client id must be no longer than 23 characters. When left blank,
|
||||
# a random id will be generated. This requires clean_session=true.
|
||||
client_id=""
|
||||
|
||||
# Keep alive interval.
|
||||
#
|
||||
# This defines the maximum time that that should pass without communication
|
||||
# between the client and server.
|
||||
keep_alive_interval="30s"
|
||||
|
||||
# CA certificate file (optional)
|
||||
#
|
||||
# Use this when setting up a secure connection (when server uses ssl://...)
|
||||
@ -1,11 +1,8 @@
|
||||
# This file contains an example AU915 example (channels 40-47 + 69).
|
||||
[[regions]]
|
||||
|
||||
# ID is an use-defined identifier for this region.
|
||||
id="au915_5"
|
||||
|
||||
# Description is a short description for this region.
|
||||
description="AU915 (channels 40-47 + 69)"
|
||||
# Name is an use-defined identifier for this region.
|
||||
name="au915_5"
|
||||
|
||||
# Common-name refers to the common-name of this region as defined by
|
||||
# the LoRa Alliance.
|
||||
@ -30,15 +27,14 @@
|
||||
# MQTT configuration.
|
||||
[regions.gateway.backend.mqtt]
|
||||
|
||||
# Topic prefix.
|
||||
#
|
||||
# The topic prefix can be used to define the region of the gateway.
|
||||
# Note, there is no need to add a trailing '/' to the prefix. The trailing
|
||||
# '/' is automatically added to the prefix if it is configured.
|
||||
topic_prefix="au915_5"
|
||||
# Event topic template.
|
||||
event_topic="au915_5/gateway/+/event/+"
|
||||
|
||||
# Command topic template.
|
||||
command_topic="au915_5/gateway/{{ gateway_id }}/command/{{ command }}"
|
||||
|
||||
# MQTT server (e.g. scheme://host:port where scheme is tcp, ssl or ws)
|
||||
server="tcp://$MQTT_BROKER_HOST:1883"
|
||||
server="tcp://mosquitto:1883"
|
||||
|
||||
# Connect with the given username (optional)
|
||||
username=""
|
||||
@ -61,21 +57,15 @@
|
||||
# Set the "clean session" flag in the connect message when this client
|
||||
# connects to an MQTT broker. By setting this flag you are indicating
|
||||
# that no messages saved by the broker for this client should be delivered.
|
||||
clean_session=false
|
||||
clean_session=true
|
||||
|
||||
# Client ID
|
||||
#
|
||||
# Set the client id to be used by this client when connecting to the MQTT
|
||||
# broker. A client id must be no longer than 23 characters. If left blank,
|
||||
# a random id will be generated by ChirpStack.
|
||||
# broker. A client id must be no longer than 23 characters. When left blank,
|
||||
# a random id will be generated. This requires clean_session=true.
|
||||
client_id=""
|
||||
|
||||
# Keep alive interval.
|
||||
#
|
||||
# This defines the maximum time that that should pass without communication
|
||||
# between the client and server.
|
||||
keep_alive_interval="30s"
|
||||
|
||||
# CA certificate file (optional)
|
||||
#
|
||||
# Use this when setting up a secure connection (when server uses ssl://...)
|
||||
@ -1,11 +1,8 @@
|
||||
# This file contains an example AU915 example (channels 48-55 + 70).
|
||||
[[regions]]
|
||||
|
||||
# ID is an use-defined identifier for this region.
|
||||
id="au915_6"
|
||||
|
||||
# Description is a short description for this region.
|
||||
description="AU915 (channels 48-55 + 70)"
|
||||
# Name is an use-defined identifier for this region.
|
||||
name="au915_6"
|
||||
|
||||
# Common-name refers to the common-name of this region as defined by
|
||||
# the LoRa Alliance.
|
||||
@ -30,15 +27,14 @@
|
||||
# MQTT configuration.
|
||||
[regions.gateway.backend.mqtt]
|
||||
|
||||
# Topic prefix.
|
||||
#
|
||||
# The topic prefix can be used to define the region of the gateway.
|
||||
# Note, there is no need to add a trailing '/' to the prefix. The trailing
|
||||
# '/' is automatically added to the prefix if it is configured.
|
||||
topic_prefix="au915_6"
|
||||
# Event topic template.
|
||||
event_topic="au915_6/gateway/+/event/+"
|
||||
|
||||
# Command topic template.
|
||||
command_topic="au915_6/gateway/{{ gateway_id }}/command/{{ command }}"
|
||||
|
||||
# MQTT server (e.g. scheme://host:port where scheme is tcp, ssl or ws)
|
||||
server="tcp://$MQTT_BROKER_HOST:1883"
|
||||
server="tcp://mosquitto:1883"
|
||||
|
||||
# Connect with the given username (optional)
|
||||
username=""
|
||||
@ -61,21 +57,15 @@
|
||||
# Set the "clean session" flag in the connect message when this client
|
||||
# connects to an MQTT broker. By setting this flag you are indicating
|
||||
# that no messages saved by the broker for this client should be delivered.
|
||||
clean_session=false
|
||||
clean_session=true
|
||||
|
||||
# Client ID
|
||||
#
|
||||
# Set the client id to be used by this client when connecting to the MQTT
|
||||
# broker. A client id must be no longer than 23 characters. If left blank,
|
||||
# a random id will be generated by ChirpStack.
|
||||
# broker. A client id must be no longer than 23 characters. When left blank,
|
||||
# a random id will be generated. This requires clean_session=true.
|
||||
client_id=""
|
||||
|
||||
# Keep alive interval.
|
||||
#
|
||||
# This defines the maximum time that that should pass without communication
|
||||
# between the client and server.
|
||||
keep_alive_interval="30s"
|
||||
|
||||
# CA certificate file (optional)
|
||||
#
|
||||
# Use this when setting up a secure connection (when server uses ssl://...)
|
||||
@ -1,11 +1,8 @@
|
||||
# This file contains an example AU915 example (channels 56-63 + 71).
|
||||
[[regions]]
|
||||
|
||||
# ID is an use-defined identifier for this region.
|
||||
id="au915_7"
|
||||
|
||||
# Description is a short description for this region.
|
||||
description="AU915 (channels 56-63 + 71)"
|
||||
# Name is an use-defined identifier for this region.
|
||||
name="au915_7"
|
||||
|
||||
# Common-name refers to the common-name of this region as defined by
|
||||
# the LoRa Alliance.
|
||||
@ -30,15 +27,14 @@
|
||||
# MQTT configuration.
|
||||
[regions.gateway.backend.mqtt]
|
||||
|
||||
# Topic prefix.
|
||||
#
|
||||
# The topic prefix can be used to define the region of the gateway.
|
||||
# Note, there is no need to add a trailing '/' to the prefix. The trailing
|
||||
# '/' is automatically added to the prefix if it is configured.
|
||||
topic_prefix="au915_7"
|
||||
# Event topic template.
|
||||
event_topic="au915_7/gateway/+/event/+"
|
||||
|
||||
# Command topic template.
|
||||
command_topic="au915_7/gateway/{{ gateway_id }}/command/{{ command }}"
|
||||
|
||||
# MQTT server (e.g. scheme://host:port where scheme is tcp, ssl or ws)
|
||||
server="tcp://$MQTT_BROKER_HOST:1883"
|
||||
server="tcp://mosquitto:1883"
|
||||
|
||||
# Connect with the given username (optional)
|
||||
username=""
|
||||
@ -61,21 +57,15 @@
|
||||
# Set the "clean session" flag in the connect message when this client
|
||||
# connects to an MQTT broker. By setting this flag you are indicating
|
||||
# that no messages saved by the broker for this client should be delivered.
|
||||
clean_session=false
|
||||
clean_session=true
|
||||
|
||||
# Client ID
|
||||
#
|
||||
# Set the client id to be used by this client when connecting to the MQTT
|
||||
# broker. A client id must be no longer than 23 characters. If left blank,
|
||||
# a random id will be generated by ChirpStack.
|
||||
# broker. A client id must be no longer than 23 characters. When left blank,
|
||||
# a random id will be generated. This requires clean_session=true.
|
||||
client_id=""
|
||||
|
||||
# Keep alive interval.
|
||||
#
|
||||
# This defines the maximum time that that should pass without communication
|
||||
# between the client and server.
|
||||
keep_alive_interval="30s"
|
||||
|
||||
# CA certificate file (optional)
|
||||
#
|
||||
# Use this when setting up a secure connection (when server uses ssl://...)
|
||||
@ -15,10 +15,11 @@
|
||||
# Format example: postgres://<USERNAME>:<PASSWORD>@<HOSTNAME>/<DATABASE>?sslmode=<SSLMODE>.
|
||||
#
|
||||
# SSL mode options:
|
||||
# * disable - Do not use TLS
|
||||
# * prefer - Attempt to connect with TLS but allow sessions without
|
||||
# * require - Require the use of TLS
|
||||
dsn="postgres://chirpstack:chirpstack@$POSTGRESQL_HOST/chirpstack?sslmode=disable"
|
||||
# * disable - no SSL
|
||||
# * require - Always SSL (skip verification)
|
||||
# * verify-ca - Always SSL (verify that the certificate presented by the server was signed by a trusted CA)
|
||||
# * verify-full - Always SSL (verify that the certification presented by the server was signed by a trusted CA and the server host name matches the one in the certificate)
|
||||
dsn="postgres://chirpstack:chirpstack@postgres/chirpstack?sslmode=disable"
|
||||
|
||||
# Max open connections.
|
||||
#
|
||||
@ -40,7 +41,7 @@
|
||||
#
|
||||
# Set multiple addresses when connecting to a cluster.
|
||||
servers=[
|
||||
"redis://$REDIS_HOST/",
|
||||
"redis://redis/",
|
||||
]
|
||||
|
||||
# TLS enabled.
|
||||
@ -69,7 +70,6 @@
|
||||
"as923_3",
|
||||
"as923_4",
|
||||
"au915_0",
|
||||
"cn470_10",
|
||||
"cn779",
|
||||
"eu433",
|
||||
"eu868",
|
||||
@ -97,9 +97,19 @@
|
||||
secret="you-must-replace-this"
|
||||
|
||||
|
||||
[gateway]
|
||||
client_cert_lifetime="365days"
|
||||
ca_cert="configuration/certs/ca.crt"
|
||||
ca_key="configuration/certs/ca.key"
|
||||
|
||||
[integration]
|
||||
enabled=["mqtt"]
|
||||
|
||||
[integration.mqtt]
|
||||
server="tcp://$MQTT_BROKER_HOST:1883/"
|
||||
server="tcp://mosquitto:1883/"
|
||||
json=true
|
||||
|
||||
[integration.mqtt.client]
|
||||
client_cert_lifetime="365days"
|
||||
ca_cert="configuration/certs/ca.crt"
|
||||
ca_key="configuration/certs/ca.key"
|
||||
|
||||
@ -1,11 +1,8 @@
|
||||
# This file contains an example CN779 configuration.
|
||||
[[regions]]
|
||||
|
||||
# ID is an user-defined identifier for this region.
|
||||
id="cn779"
|
||||
|
||||
# Description is a short description for this region.
|
||||
description="CN779"
|
||||
# Name is an user-defined identifier for this region.
|
||||
name="cn779"
|
||||
|
||||
# Common-name refers to the common-name of this region as defined by
|
||||
# the LoRa Alliance.
|
||||
@ -30,15 +27,14 @@
|
||||
# MQTT configuration.
|
||||
[regions.gateway.backend.mqtt]
|
||||
|
||||
# Topic prefix.
|
||||
#
|
||||
# The topic prefix can be used to define the region of the gateway.
|
||||
# Note, there is no need to add a trailing '/' to the prefix. The trailing
|
||||
# '/' is automatically added to the prefix if it is configured.
|
||||
topic_prefix="cn779"
|
||||
# Event topic template.
|
||||
event_topic="cn779/gateway/+/event/+"
|
||||
|
||||
# Command topic template.
|
||||
command_topic="cn779/gateway/{{ gateway_id }}/command/{{ command }}"
|
||||
|
||||
# MQTT server (e.g. scheme://host:port where scheme is tcp, ssl or ws)
|
||||
server="tcp://$MQTT_BROKER_HOST:1883"
|
||||
server="tcp://mosquitto:1883"
|
||||
|
||||
# Connect with the given username (optional)
|
||||
username=""
|
||||
@ -61,21 +57,15 @@
|
||||
# Set the "clean session" flag in the connect message when this client
|
||||
# connects to an MQTT broker. By setting this flag you are indicating
|
||||
# that no messages saved by the broker for this client should be delivered.
|
||||
clean_session=false
|
||||
clean_session=true
|
||||
|
||||
# Client ID
|
||||
#
|
||||
# Set the client id to be used by this client when connecting to the MQTT
|
||||
# broker. A client id must be no longer than 23 characters. If left blank,
|
||||
# a random id will be generated by ChirpStack.
|
||||
# broker. A client id must be no longer than 23 characters. When left blank,
|
||||
# a random id will be generated. This requires clean_session=true.
|
||||
client_id=""
|
||||
|
||||
# Keep alive interval.
|
||||
#
|
||||
# This defines the maximum time that that should pass without communication
|
||||
# between the client and server.
|
||||
keep_alive_interval="30s"
|
||||
|
||||
# CA certificate file (optional)
|
||||
#
|
||||
# Use this when setting up a secure connection (when server uses ssl://...)
|
||||
@ -201,7 +191,7 @@
|
||||
[regions.network.class_b]
|
||||
|
||||
# Ping-slot data-rate.
|
||||
ping_slot_dr=3
|
||||
ping_slot_dr=0
|
||||
|
||||
# Ping-slot frequency (Hz)
|
||||
#
|
||||
@ -1,11 +1,8 @@
|
||||
# This file contains an example EU433 configuration.
|
||||
[[regions]]
|
||||
|
||||
# ID is an user-defined identifier for this region.
|
||||
id="eu433"
|
||||
|
||||
# Description is a short description for this region.
|
||||
description="EU443"
|
||||
# Name is an user-defined identifier for this region.
|
||||
name="eu433"
|
||||
|
||||
# Common-name refers to the common-name of this region as defined by
|
||||
# the LoRa Alliance.
|
||||
@ -30,15 +27,14 @@
|
||||
# MQTT configuration.
|
||||
[regions.gateway.backend.mqtt]
|
||||
|
||||
# Topic prefix.
|
||||
#
|
||||
# The topic prefix can be used to define the region of the gateway.
|
||||
# Note, there is no need to add a trailing '/' to the prefix. The trailing
|
||||
# '/' is automatically added to the prefix if it is configured.
|
||||
topic_prefix="eu433"
|
||||
# Event topic template.
|
||||
event_topic="eu433/gateway/+/event/+"
|
||||
|
||||
# Command topic template.
|
||||
command_topic="eu433/gateway/{{ gateway_id }}/command/{{ command }}"
|
||||
|
||||
# MQTT server (e.g. scheme://host:port where scheme is tcp, ssl or ws)
|
||||
server="tcp://$MQTT_BROKER_HOST:1883"
|
||||
server="tcp://mosquitto:1883"
|
||||
|
||||
# Connect with the given username (optional)
|
||||
username=""
|
||||
@ -61,21 +57,15 @@
|
||||
# Set the "clean session" flag in the connect message when this client
|
||||
# connects to an MQTT broker. By setting this flag you are indicating
|
||||
# that no messages saved by the broker for this client should be delivered.
|
||||
clean_session=false
|
||||
clean_session=true
|
||||
|
||||
# Client ID
|
||||
#
|
||||
# Set the client id to be used by this client when connecting to the MQTT
|
||||
# broker. A client id must be no longer than 23 characters. If left blank,
|
||||
# a random id will be generated by ChirpStack.
|
||||
# broker. A client id must be no longer than 23 characters. When left blank,
|
||||
# a random id will be generated. This requires clean_session=true.
|
||||
client_id=""
|
||||
|
||||
# Keep alive interval.
|
||||
#
|
||||
# This defines the maximum time that that should pass without communication
|
||||
# between the client and server.
|
||||
keep_alive_interval="30s"
|
||||
|
||||
# CA certificate file (optional)
|
||||
#
|
||||
# Use this when setting up a secure connection (when server uses ssl://...)
|
||||
@ -201,7 +191,7 @@
|
||||
[regions.network.class_b]
|
||||
|
||||
# Ping-slot data-rate.
|
||||
ping_slot_dr=3
|
||||
ping_slot_dr=0
|
||||
|
||||
# Ping-slot frequency (Hz)
|
||||
#
|
||||
@ -1,11 +1,8 @@
|
||||
# This file contains an example EU868 configuration.
|
||||
[[regions]]
|
||||
|
||||
# ID is an user-defined identifier for this region.
|
||||
id="eu868"
|
||||
|
||||
# Description is a short description for this region.
|
||||
description="EU868"
|
||||
# Name is an user-defined identifier for this region.
|
||||
name="eu868"
|
||||
|
||||
# Common-name refers to the common-name of this region as defined by
|
||||
# the LoRa Alliance.
|
||||
@ -30,15 +27,14 @@
|
||||
# MQTT configuration.
|
||||
[regions.gateway.backend.mqtt]
|
||||
|
||||
# Topic prefix.
|
||||
#
|
||||
# The topic prefix can be used to define the region of the gateway.
|
||||
# Note, there is no need to add a trailing '/' to the prefix. The trailing
|
||||
# '/' is automatically added to the prefix if it is configured.
|
||||
topic_prefix="eu868"
|
||||
# Event topic template.
|
||||
event_topic="eu868/gateway/+/event/+"
|
||||
|
||||
# Command topic template.
|
||||
command_topic="eu868/gateway/{{ gateway_id }}/command/{{ command }}"
|
||||
|
||||
# MQTT server (e.g. scheme://host:port where scheme is tcp, ssl or ws)
|
||||
server="tcp://$MQTT_BROKER_HOST:1883"
|
||||
server="tcp://mosquitto:1883"
|
||||
|
||||
# Connect with the given username (optional)
|
||||
username=""
|
||||
@ -61,21 +57,15 @@
|
||||
# Set the "clean session" flag in the connect message when this client
|
||||
# connects to an MQTT broker. By setting this flag you are indicating
|
||||
# that no messages saved by the broker for this client should be delivered.
|
||||
clean_session=false
|
||||
clean_session=true
|
||||
|
||||
# Client ID
|
||||
#
|
||||
# Set the client id to be used by this client when connecting to the MQTT
|
||||
# broker. A client id must be no longer than 23 characters. If left blank,
|
||||
# a random id will be generated by ChirpStack.
|
||||
# broker. A client id must be no longer than 23 characters. When left blank,
|
||||
# a random id will be generated. This requires clean_session=true.
|
||||
client_id=""
|
||||
|
||||
# Keep alive interval.
|
||||
#
|
||||
# This defines the maximum time that that should pass without communication
|
||||
# between the client and server.
|
||||
keep_alive_interval="30s"
|
||||
|
||||
# CA certificate file (optional)
|
||||
#
|
||||
# Use this when setting up a secure connection (when server uses ssl://...)
|
||||
@ -243,7 +233,7 @@
|
||||
[regions.network.class_b]
|
||||
|
||||
# Ping-slot data-rate.
|
||||
ping_slot_dr=3
|
||||
ping_slot_dr=0
|
||||
|
||||
# Ping-slot frequency (Hz)
|
||||
#
|
||||
@ -1,11 +1,8 @@
|
||||
# This file contains an example IN865 configuration.
|
||||
[[regions]]
|
||||
|
||||
# ID is an user-defined identifier for this region.
|
||||
id="in865"
|
||||
|
||||
# Description is a short description for this region.
|
||||
description="IN865"
|
||||
# Name is an user-defined identifier for this region.
|
||||
name="in865"
|
||||
|
||||
# Common-name refers to the common-name of this region as defined by
|
||||
# the LoRa Alliance.
|
||||
@ -30,15 +27,14 @@
|
||||
# MQTT configuration.
|
||||
[regions.gateway.backend.mqtt]
|
||||
|
||||
# Topic prefix.
|
||||
#
|
||||
# The topic prefix can be used to define the region of the gateway.
|
||||
# Note, there is no need to add a trailing '/' to the prefix. The trailing
|
||||
# '/' is automatically added to the prefix if it is configured.
|
||||
topic_prefix="in865"
|
||||
# Event topic template.
|
||||
event_topic="in865/gateway/+/event/+"
|
||||
|
||||
# Command topic template.
|
||||
command_topic="in865/gateway/{{ gateway_id }}/command/{{ command }}"
|
||||
|
||||
# MQTT server (e.g. scheme://host:port where scheme is tcp, ssl or ws)
|
||||
server="tcp://$MQTT_BROKER_HOST:1883"
|
||||
server="tcp://mosquitto:1883"
|
||||
|
||||
# Connect with the given username (optional)
|
||||
username=""
|
||||
@ -61,21 +57,15 @@
|
||||
# Set the "clean session" flag in the connect message when this client
|
||||
# connects to an MQTT broker. By setting this flag you are indicating
|
||||
# that no messages saved by the broker for this client should be delivered.
|
||||
clean_session=false
|
||||
clean_session=true
|
||||
|
||||
# Client ID
|
||||
#
|
||||
# Set the client id to be used by this client when connecting to the MQTT
|
||||
# broker. A client id must be no longer than 23 characters. If left blank,
|
||||
# a random id will be generated by ChirpStack.
|
||||
# broker. A client id must be no longer than 23 characters. When left blank,
|
||||
# a random id will be generated. This requires clean_session=true.
|
||||
client_id=""
|
||||
|
||||
# Keep alive interval.
|
||||
#
|
||||
# This defines the maximum time that that should pass without communication
|
||||
# between the client and server.
|
||||
keep_alive_interval="30s"
|
||||
|
||||
# CA certificate file (optional)
|
||||
#
|
||||
# Use this when setting up a secure connection (when server uses ssl://...)
|
||||
@ -201,7 +191,7 @@
|
||||
[regions.network.class_b]
|
||||
|
||||
# Ping-slot data-rate.
|
||||
ping_slot_dr=4
|
||||
ping_slot_dr=0
|
||||
|
||||
# Ping-slot frequency (Hz)
|
||||
#
|
||||
@ -1,11 +1,8 @@
|
||||
# This file contains an example ISM2400 configuration.
|
||||
[[regions]]
|
||||
|
||||
# ID is an user-defined identifier for this region.
|
||||
id="ism2400"
|
||||
|
||||
# Description is a short description for this region.
|
||||
description="ISM2400"
|
||||
# Name is an user-defined identifier for this region.
|
||||
name="ism2400"
|
||||
|
||||
# Common-name refers to the common-name of this region as defined by
|
||||
# the LoRa Alliance.
|
||||
@ -30,15 +27,14 @@
|
||||
# MQTT configuration.
|
||||
[regions.gateway.backend.mqtt]
|
||||
|
||||
# Topic prefix.
|
||||
#
|
||||
# The topic prefix can be used to define the region of the gateway.
|
||||
# Note, there is no need to add a trailing '/' to the prefix. The trailing
|
||||
# '/' is automatically added to the prefix if it is configured.
|
||||
topic_prefix="ism2400"
|
||||
# Event topic template.
|
||||
event_topic="ism2400/gateway/+/event/+"
|
||||
|
||||
# Command topic template.
|
||||
command_topic="ism2400/gateway/{{ gateway_id }}/command/{{ command }}"
|
||||
|
||||
# MQTT server (e.g. scheme://host:port where scheme is tcp, ssl or ws)
|
||||
server="tcp://$MQTT_BROKER_HOST:1883"
|
||||
server="tcp://mosquitto:1883"
|
||||
|
||||
# Connect with the given username (optional)
|
||||
username=""
|
||||
@ -61,21 +57,15 @@
|
||||
# Set the "clean session" flag in the connect message when this client
|
||||
# connects to an MQTT broker. By setting this flag you are indicating
|
||||
# that no messages saved by the broker for this client should be delivered.
|
||||
clean_session=false
|
||||
clean_session=true
|
||||
|
||||
# Client ID
|
||||
#
|
||||
# Set the client id to be used by this client when connecting to the MQTT
|
||||
# broker. A client id must be no longer than 23 characters. If left blank,
|
||||
# a random id will be generated by ChirpStack.
|
||||
# broker. A client id must be no longer than 23 characters. When left blank,
|
||||
# a random id will be generated. This requires clean_session=true.
|
||||
client_id=""
|
||||
|
||||
# Keep alive interval.
|
||||
#
|
||||
# This defines the maximum time that that should pass without communication
|
||||
# between the client and server.
|
||||
keep_alive_interval="30s"
|
||||
|
||||
# CA certificate file (optional)
|
||||
#
|
||||
# Use this when setting up a secure connection (when server uses ssl://...)
|
||||
@ -1,11 +1,8 @@
|
||||
# This file contains an example KR920 configuration.
|
||||
[[regions]]
|
||||
|
||||
# ID is an user-defined identifier for this region.
|
||||
id="kr920"
|
||||
|
||||
# Description is a short description for this region.
|
||||
description="KR920"
|
||||
# Name is an user-defined identifier for this region.
|
||||
name="kr920"
|
||||
|
||||
# Common-name refers to the common-name of this region as defined by
|
||||
# the LoRa Alliance.
|
||||
@ -30,15 +27,14 @@
|
||||
# MQTT configuration.
|
||||
[regions.gateway.backend.mqtt]
|
||||
|
||||
# Topic prefix.
|
||||
#
|
||||
# The topic prefix can be used to define the region of the gateway.
|
||||
# Note, there is no need to add a trailing '/' to the prefix. The trailing
|
||||
# '/' is automatically added to the prefix if it is configured.
|
||||
topic_prefix="kr920"
|
||||
# Event topic template.
|
||||
event_topic="kr920/gateway/+/event/+"
|
||||
|
||||
# Command topic template.
|
||||
command_topic="kr920/gateway/{{ gateway_id }}/command/{{ command }}"
|
||||
|
||||
# MQTT server (e.g. scheme://host:port where scheme is tcp, ssl or ws)
|
||||
server="tcp://$MQTT_BROKER_HOST:1883"
|
||||
server="tcp://mosquitto:1883"
|
||||
|
||||
# Connect with the given username (optional)
|
||||
username=""
|
||||
@ -61,21 +57,15 @@
|
||||
# Set the "clean session" flag in the connect message when this client
|
||||
# connects to an MQTT broker. By setting this flag you are indicating
|
||||
# that no messages saved by the broker for this client should be delivered.
|
||||
clean_session=false
|
||||
clean_session=true
|
||||
|
||||
# Client ID
|
||||
#
|
||||
# Set the client id to be used by this client when connecting to the MQTT
|
||||
# broker. A client id must be no longer than 23 characters. If left blank,
|
||||
# a random id will be generated by ChirpStack.
|
||||
# broker. A client id must be no longer than 23 characters. When left blank,
|
||||
# a random id will be generated. This requires clean_session=true.
|
||||
client_id=""
|
||||
|
||||
# Keep alive interval.
|
||||
#
|
||||
# This defines the maximum time that that should pass without communication
|
||||
# between the client and server.
|
||||
keep_alive_interval="30s"
|
||||
|
||||
# CA certificate file (optional)
|
||||
#
|
||||
# Use this when setting up a secure connection (when server uses ssl://...)
|
||||
@ -201,7 +191,7 @@
|
||||
[regions.network.class_b]
|
||||
|
||||
# Ping-slot data-rate.
|
||||
ping_slot_dr=3
|
||||
ping_slot_dr=0
|
||||
|
||||
# Ping-slot frequency (Hz)
|
||||
#
|
||||
@ -1,247 +0,0 @@
|
||||
# This file contains an example CN470 example (channels 0-7).
|
||||
[[regions]]
|
||||
|
||||
# ID is an use-defined identifier for this region.
|
||||
id="cn470_0"
|
||||
|
||||
# Description is a short description for this region.
|
||||
description="CN470 (channels 0-7)"
|
||||
|
||||
# Common-name refers to the common-name of this region as defined by
|
||||
# the LoRa Alliance.
|
||||
common_name="CN470"
|
||||
|
||||
|
||||
# Gateway configuration.
|
||||
[regions.gateway]
|
||||
|
||||
# Force gateways as private.
|
||||
#
|
||||
# If enabled, gateways can only be used by devices under the same tenant.
|
||||
force_gws_private=false
|
||||
|
||||
|
||||
# Gateway backend configuration.
|
||||
[regions.gateway.backend]
|
||||
|
||||
# The enabled backend type.
|
||||
enabled="mqtt"
|
||||
|
||||
# MQTT configuration.
|
||||
[regions.gateway.backend.mqtt]
|
||||
|
||||
# Topic prefix.
|
||||
#
|
||||
# The topic prefix can be used to define the region of the gateway.
|
||||
# Note, there is no need to add a trailing '/' to the prefix. The trailing
|
||||
# '/' is automatically added to the prefix if it is configured.
|
||||
topic_prefix="cn470_0"
|
||||
|
||||
# MQTT server (e.g. scheme://host:port where scheme is tcp, ssl or ws)
|
||||
server="tcp://$MQTT_BROKER_HOST:1883"
|
||||
|
||||
# Connect with the given username (optional)
|
||||
username=""
|
||||
|
||||
# Connect with the given password (optional)
|
||||
password=""
|
||||
|
||||
# Quality of service level
|
||||
#
|
||||
# 0: at most once
|
||||
# 1: at least once
|
||||
# 2: exactly once
|
||||
#
|
||||
# Note: an increase of this value will decrease the performance.
|
||||
# For more information: https://www.hivemq.com/blog/mqtt-essentials-part-6-mqtt-quality-of-service-levels
|
||||
qos=0
|
||||
|
||||
# Clean session
|
||||
#
|
||||
# Set the "clean session" flag in the connect message when this client
|
||||
# connects to an MQTT broker. By setting this flag you are indicating
|
||||
# that no messages saved by the broker for this client should be delivered.
|
||||
clean_session=false
|
||||
|
||||
# Client ID
|
||||
#
|
||||
# Set the client id to be used by this client when connecting to the MQTT
|
||||
# broker. A client id must be no longer than 23 characters. If left blank,
|
||||
# a random id will be generated by ChirpStack.
|
||||
client_id=""
|
||||
|
||||
# Keep alive interval.
|
||||
#
|
||||
# This defines the maximum time that that should pass without communication
|
||||
# between the client and server.
|
||||
keep_alive_interval="30s"
|
||||
|
||||
# CA certificate file (optional)
|
||||
#
|
||||
# Use this when setting up a secure connection (when server uses ssl://...)
|
||||
# but the certificate used by the server is not trusted by any CA certificate
|
||||
# on the server (e.g. when self generated).
|
||||
ca_cert=""
|
||||
|
||||
# TLS certificate file (optional)
|
||||
tls_cert=""
|
||||
|
||||
# TLS key file (optional)
|
||||
tls_key=""
|
||||
|
||||
|
||||
# Gateway channel configuration.
|
||||
#
|
||||
# Note: this configuration is only used in case the gateway is using the
|
||||
# ChirpStack Concentratord daemon. In any other case, this configuration
|
||||
# is ignored.
|
||||
[[regions.gateway.channels]]
|
||||
frequency=470300000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=470500000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=470700000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=470900000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=471100000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=471300000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=471500000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=471700000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
|
||||
# Region specific network configuration.
|
||||
[regions.network]
|
||||
|
||||
# Installation margin (dB) used by the ADR engine.
|
||||
#
|
||||
# A higher number means that the network-server will keep more margin,
|
||||
# resulting in a lower data-rate but decreasing the chance that the
|
||||
# device gets disconnected because it is unable to reach one of the
|
||||
# surrounded gateways.
|
||||
installation_margin=10
|
||||
|
||||
# RX window (Class-A).
|
||||
#
|
||||
# Set this to:
|
||||
# 0: RX1 / RX2
|
||||
# 1: RX1 only
|
||||
# 2: RX2 only
|
||||
rx_window=0
|
||||
|
||||
# RX1 delay (1 - 15 seconds).
|
||||
rx1_delay=1
|
||||
|
||||
# RX1 data-rate offset
|
||||
rx1_dr_offset=0
|
||||
|
||||
# RX2 data-rate
|
||||
rx2_dr=0
|
||||
|
||||
# RX2 frequency (Hz)
|
||||
rx2_frequency=505300000
|
||||
|
||||
# Prefer RX2 on RX1 data-rate less than.
|
||||
#
|
||||
# Prefer RX2 over RX1 based on the RX1 data-rate. When the RX1 data-rate
|
||||
# is smaller than the configured value, then the Network Server will
|
||||
# first try to schedule the downlink for RX2, failing that (e.g. the gateway
|
||||
# has already a payload scheduled at the RX2 timing) it will try RX1.
|
||||
rx2_prefer_on_rx1_dr_lt=0
|
||||
|
||||
# Prefer RX2 on link budget.
|
||||
#
|
||||
# When the link-budget is better for RX2 than for RX1, the Network Server will first
|
||||
# try to schedule the downlink in RX2, failing that it will try RX1.
|
||||
rx2_prefer_on_link_budget=false
|
||||
|
||||
# Downlink TX Power (dBm)
|
||||
#
|
||||
# When set to -1, the downlink TX Power from the configured band will
|
||||
# be used.
|
||||
#
|
||||
# Please consult the LoRaWAN Regional Parameters and local regulations
|
||||
# for valid and legal options. Note that the configured TX Power must be
|
||||
# supported by your gateway(s).
|
||||
downlink_tx_power=-1
|
||||
|
||||
# ADR is disabled.
|
||||
adr_disabled=false
|
||||
|
||||
# Minimum data-rate.
|
||||
min_dr=0
|
||||
|
||||
# Maximum data-rate.
|
||||
max_dr=5
|
||||
|
||||
# Enabled uplink channels.
|
||||
#
|
||||
# Use this when ony a sub-set of the by default enabled channels are being
|
||||
# used. For example when only using the first 8 channels of the US band.
|
||||
# Note: when left blank / empty array, all channels will be enabled.
|
||||
enabled_uplink_channels=[0, 1, 2, 3, 4, 5, 6, 7]
|
||||
|
||||
|
||||
# Rejoin-request configuration (LoRaWAN 1.1)
|
||||
[regions.network.rejoin_request]
|
||||
|
||||
# Request devices to periodically send rejoin-requests.
|
||||
enabled=false
|
||||
|
||||
# The device must send a rejoin-request type 0 at least every 2^(max_count_n + 4)
|
||||
# uplink messages. Valid values are 0 to 15.
|
||||
max_count_n=0
|
||||
|
||||
# The device must send a rejoin-request type 0 at least every 2^(max_time_n + 10)
|
||||
# seconds. Valid values are 0 to 15.
|
||||
#
|
||||
# 0 = roughly 17 minutes
|
||||
# 15 = about 1 year
|
||||
max_time_n=0
|
||||
|
||||
|
||||
# Class-B configuration.
|
||||
[regions.network.class_b]
|
||||
|
||||
# Ping-slot data-rate.
|
||||
ping_slot_dr=2
|
||||
|
||||
# Ping-slot frequency (Hz)
|
||||
#
|
||||
# set this to 0 to use the default frequency plan for the configured region
|
||||
# (which could be frequency hopping).
|
||||
ping_slot_frequency=0
|
||||
@ -1,247 +0,0 @@
|
||||
# This file contains an example CN470 example (channels 8-15).
|
||||
[[regions]]
|
||||
|
||||
# ID is an use-defined identifier for this region.
|
||||
id="cn470_1"
|
||||
|
||||
# Description is a short description for this region.
|
||||
description="CN470 (channels 8-15)"
|
||||
|
||||
# Common-name refers to the common-name of this region as defined by
|
||||
# the LoRa Alliance.
|
||||
common_name="CN470"
|
||||
|
||||
|
||||
# Gateway configuration.
|
||||
[regions.gateway]
|
||||
|
||||
# Force gateways as private.
|
||||
#
|
||||
# If enabled, gateways can only be used by devices under the same tenant.
|
||||
force_gws_private=false
|
||||
|
||||
|
||||
# Gateway backend configuration.
|
||||
[regions.gateway.backend]
|
||||
|
||||
# The enabled backend type.
|
||||
enabled="mqtt"
|
||||
|
||||
# MQTT configuration.
|
||||
[regions.gateway.backend.mqtt]
|
||||
|
||||
# Topic prefix.
|
||||
#
|
||||
# The topic prefix can be used to define the region of the gateway.
|
||||
# Note, there is no need to add a trailing '/' to the prefix. The trailing
|
||||
# '/' is automatically added to the prefix if it is configured.
|
||||
topic_prefix="cn470_1"
|
||||
|
||||
# MQTT server (e.g. scheme://host:port where scheme is tcp, ssl or ws)
|
||||
server="tcp://$MQTT_BROKER_HOST:1883"
|
||||
|
||||
# Connect with the given username (optional)
|
||||
username=""
|
||||
|
||||
# Connect with the given password (optional)
|
||||
password=""
|
||||
|
||||
# Quality of service level
|
||||
#
|
||||
# 0: at most once
|
||||
# 1: at least once
|
||||
# 2: exactly once
|
||||
#
|
||||
# Note: an increase of this value will decrease the performance.
|
||||
# For more information: https://www.hivemq.com/blog/mqtt-essentials-part-6-mqtt-quality-of-service-levels
|
||||
qos=0
|
||||
|
||||
# Clean session
|
||||
#
|
||||
# Set the "clean session" flag in the connect message when this client
|
||||
# connects to an MQTT broker. By setting this flag you are indicating
|
||||
# that no messages saved by the broker for this client should be delivered.
|
||||
clean_session=false
|
||||
|
||||
# Client ID
|
||||
#
|
||||
# Set the client id to be used by this client when connecting to the MQTT
|
||||
# broker. A client id must be no longer than 23 characters. If left blank,
|
||||
# a random id will be generated by ChirpStack.
|
||||
client_id=""
|
||||
|
||||
# Keep alive interval.
|
||||
#
|
||||
# This defines the maximum time that that should pass without communication
|
||||
# between the client and server.
|
||||
keep_alive_interval="30s"
|
||||
|
||||
# CA certificate file (optional)
|
||||
#
|
||||
# Use this when setting up a secure connection (when server uses ssl://...)
|
||||
# but the certificate used by the server is not trusted by any CA certificate
|
||||
# on the server (e.g. when self generated).
|
||||
ca_cert=""
|
||||
|
||||
# TLS certificate file (optional)
|
||||
tls_cert=""
|
||||
|
||||
# TLS key file (optional)
|
||||
tls_key=""
|
||||
|
||||
|
||||
# Gateway channel configuration.
|
||||
#
|
||||
# Note: this configuration is only used in case the gateway is using the
|
||||
# ChirpStack Concentratord daemon. In any other case, this configuration
|
||||
# is ignored.
|
||||
[[regions.gateway.channels]]
|
||||
frequency=471900000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=472100000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=472300000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=472500000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=472700000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=472900000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=473100000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=473300000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
|
||||
# Region specific network configuration.
|
||||
[regions.network]
|
||||
|
||||
# Installation margin (dB) used by the ADR engine.
|
||||
#
|
||||
# A higher number means that the network-server will keep more margin,
|
||||
# resulting in a lower data-rate but decreasing the chance that the
|
||||
# device gets disconnected because it is unable to reach one of the
|
||||
# surrounded gateways.
|
||||
installation_margin=10
|
||||
|
||||
# RX window (Class-A).
|
||||
#
|
||||
# Set this to:
|
||||
# 0: RX1 / RX2
|
||||
# 1: RX1 only
|
||||
# 2: RX2 only
|
||||
rx_window=0
|
||||
|
||||
# RX1 delay (1 - 15 seconds).
|
||||
rx1_delay=1
|
||||
|
||||
# RX1 data-rate offset
|
||||
rx1_dr_offset=0
|
||||
|
||||
# RX2 data-rate
|
||||
rx2_dr=0
|
||||
|
||||
# RX2 frequency (Hz)
|
||||
rx2_frequency=505300000
|
||||
|
||||
# Prefer RX2 on RX1 data-rate less than.
|
||||
#
|
||||
# Prefer RX2 over RX1 based on the RX1 data-rate. When the RX1 data-rate
|
||||
# is smaller than the configured value, then the Network Server will
|
||||
# first try to schedule the downlink for RX2, failing that (e.g. the gateway
|
||||
# has already a payload scheduled at the RX2 timing) it will try RX1.
|
||||
rx2_prefer_on_rx1_dr_lt=0
|
||||
|
||||
# Prefer RX2 on link budget.
|
||||
#
|
||||
# When the link-budget is better for RX2 than for RX1, the Network Server will first
|
||||
# try to schedule the downlink in RX2, failing that it will try RX1.
|
||||
rx2_prefer_on_link_budget=false
|
||||
|
||||
# Downlink TX Power (dBm)
|
||||
#
|
||||
# When set to -1, the downlink TX Power from the configured band will
|
||||
# be used.
|
||||
#
|
||||
# Please consult the LoRaWAN Regional Parameters and local regulations
|
||||
# for valid and legal options. Note that the configured TX Power must be
|
||||
# supported by your gateway(s).
|
||||
downlink_tx_power=-1
|
||||
|
||||
# ADR is disabled.
|
||||
adr_disabled=false
|
||||
|
||||
# Minimum data-rate.
|
||||
min_dr=0
|
||||
|
||||
# Maximum data-rate.
|
||||
max_dr=5
|
||||
|
||||
# Enabled uplink channels.
|
||||
#
|
||||
# Use this when ony a sub-set of the by default enabled channels are being
|
||||
# used. For example when only using the first 8 channels of the US band.
|
||||
# Note: when left blank / empty array, all channels will be enabled.
|
||||
enabled_uplink_channels=[8, 9, 10, 11, 12, 13, 14, 15]
|
||||
|
||||
|
||||
# Rejoin-request configuration (LoRaWAN 1.1)
|
||||
[regions.network.rejoin_request]
|
||||
|
||||
# Request devices to periodically send rejoin-requests.
|
||||
enabled=false
|
||||
|
||||
# The device must send a rejoin-request type 0 at least every 2^(max_count_n + 4)
|
||||
# uplink messages. Valid values are 0 to 15.
|
||||
max_count_n=0
|
||||
|
||||
# The device must send a rejoin-request type 0 at least every 2^(max_time_n + 10)
|
||||
# seconds. Valid values are 0 to 15.
|
||||
#
|
||||
# 0 = roughly 17 minutes
|
||||
# 15 = about 1 year
|
||||
max_time_n=0
|
||||
|
||||
|
||||
# Class-B configuration.
|
||||
[regions.network.class_b]
|
||||
|
||||
# Ping-slot data-rate.
|
||||
ping_slot_dr=2
|
||||
|
||||
# Ping-slot frequency (Hz)
|
||||
#
|
||||
# set this to 0 to use the default frequency plan for the configured region
|
||||
# (which could be frequency hopping).
|
||||
ping_slot_frequency=0
|
||||
@ -1,247 +0,0 @@
|
||||
# This file contains an example CN470 example (channels 80-87).
|
||||
[[regions]]
|
||||
|
||||
# ID is an use-defined identifier for this region.
|
||||
id="cn470_10"
|
||||
|
||||
# Description is a short description for this region.
|
||||
description="CN470 (channels 80-87)"
|
||||
|
||||
# Common-name refers to the common-name of this region as defined by
|
||||
# the LoRa Alliance.
|
||||
common_name="CN470"
|
||||
|
||||
|
||||
# Gateway configuration.
|
||||
[regions.gateway]
|
||||
|
||||
# Force gateways as private.
|
||||
#
|
||||
# If enabled, gateways can only be used by devices under the same tenant.
|
||||
force_gws_private=false
|
||||
|
||||
|
||||
# Gateway backend configuration.
|
||||
[regions.gateway.backend]
|
||||
|
||||
# The enabled backend type.
|
||||
enabled="mqtt"
|
||||
|
||||
# MQTT configuration.
|
||||
[regions.gateway.backend.mqtt]
|
||||
|
||||
# Topic prefix.
|
||||
#
|
||||
# The topic prefix can be used to define the region of the gateway.
|
||||
# Note, there is no need to add a trailing '/' to the prefix. The trailing
|
||||
# '/' is automatically added to the prefix if it is configured.
|
||||
topic_prefix="cn470_10"
|
||||
|
||||
# MQTT server (e.g. scheme://host:port where scheme is tcp, ssl or ws)
|
||||
server="tcp://$MQTT_BROKER_HOST:1883"
|
||||
|
||||
# Connect with the given username (optional)
|
||||
username=""
|
||||
|
||||
# Connect with the given password (optional)
|
||||
password=""
|
||||
|
||||
# Quality of service level
|
||||
#
|
||||
# 0: at most once
|
||||
# 1: at least once
|
||||
# 2: exactly once
|
||||
#
|
||||
# Note: an increase of this value will decrease the performance.
|
||||
# For more information: https://www.hivemq.com/blog/mqtt-essentials-part-6-mqtt-quality-of-service-levels
|
||||
qos=0
|
||||
|
||||
# Clean session
|
||||
#
|
||||
# Set the "clean session" flag in the connect message when this client
|
||||
# connects to an MQTT broker. By setting this flag you are indicating
|
||||
# that no messages saved by the broker for this client should be delivered.
|
||||
clean_session=false
|
||||
|
||||
# Client ID
|
||||
#
|
||||
# Set the client id to be used by this client when connecting to the MQTT
|
||||
# broker. A client id must be no longer than 23 characters. If left blank,
|
||||
# a random id will be generated by ChirpStack.
|
||||
client_id=""
|
||||
|
||||
# Keep alive interval.
|
||||
#
|
||||
# This defines the maximum time that that should pass without communication
|
||||
# between the client and server.
|
||||
keep_alive_interval="30s"
|
||||
|
||||
# CA certificate file (optional)
|
||||
#
|
||||
# Use this when setting up a secure connection (when server uses ssl://...)
|
||||
# but the certificate used by the server is not trusted by any CA certificate
|
||||
# on the server (e.g. when self generated).
|
||||
ca_cert=""
|
||||
|
||||
# TLS certificate file (optional)
|
||||
tls_cert=""
|
||||
|
||||
# TLS key file (optional)
|
||||
tls_key=""
|
||||
|
||||
|
||||
# Gateway channel configuration.
|
||||
#
|
||||
# Note: this configuration is only used in case the gateway is using the
|
||||
# ChirpStack Concentratord daemon. In any other case, this configuration
|
||||
# is ignored.
|
||||
[[regions.gateway.channels]]
|
||||
frequency=486300000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=486500000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=486700000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=486900000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=487100000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=487300000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=487500000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=487700000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
|
||||
# Region specific network configuration.
|
||||
[regions.network]
|
||||
|
||||
# Installation margin (dB) used by the ADR engine.
|
||||
#
|
||||
# A higher number means that the network-server will keep more margin,
|
||||
# resulting in a lower data-rate but decreasing the chance that the
|
||||
# device gets disconnected because it is unable to reach one of the
|
||||
# surrounded gateways.
|
||||
installation_margin=10
|
||||
|
||||
# RX window (Class-A).
|
||||
#
|
||||
# Set this to:
|
||||
# 0: RX1 / RX2
|
||||
# 1: RX1 only
|
||||
# 2: RX2 only
|
||||
rx_window=0
|
||||
|
||||
# RX1 delay (1 - 15 seconds).
|
||||
rx1_delay=1
|
||||
|
||||
# RX1 data-rate offset
|
||||
rx1_dr_offset=0
|
||||
|
||||
# RX2 data-rate
|
||||
rx2_dr=0
|
||||
|
||||
# RX2 frequency (Hz)
|
||||
rx2_frequency=505300000
|
||||
|
||||
# Prefer RX2 on RX1 data-rate less than.
|
||||
#
|
||||
# Prefer RX2 over RX1 based on the RX1 data-rate. When the RX1 data-rate
|
||||
# is smaller than the configured value, then the Network Server will
|
||||
# first try to schedule the downlink for RX2, failing that (e.g. the gateway
|
||||
# has already a payload scheduled at the RX2 timing) it will try RX1.
|
||||
rx2_prefer_on_rx1_dr_lt=0
|
||||
|
||||
# Prefer RX2 on link budget.
|
||||
#
|
||||
# When the link-budget is better for RX2 than for RX1, the Network Server will first
|
||||
# try to schedule the downlink in RX2, failing that it will try RX1.
|
||||
rx2_prefer_on_link_budget=false
|
||||
|
||||
# Downlink TX Power (dBm)
|
||||
#
|
||||
# When set to -1, the downlink TX Power from the configured band will
|
||||
# be used.
|
||||
#
|
||||
# Please consult the LoRaWAN Regional Parameters and local regulations
|
||||
# for valid and legal options. Note that the configured TX Power must be
|
||||
# supported by your gateway(s).
|
||||
downlink_tx_power=-1
|
||||
|
||||
# ADR is disabled.
|
||||
adr_disabled=false
|
||||
|
||||
# Minimum data-rate.
|
||||
min_dr=0
|
||||
|
||||
# Maximum data-rate.
|
||||
max_dr=5
|
||||
|
||||
# Enabled uplink channels.
|
||||
#
|
||||
# Use this when ony a sub-set of the by default enabled channels are being
|
||||
# used. For example when only using the first 8 channels of the US band.
|
||||
# Note: when left blank / empty array, all channels will be enabled.
|
||||
enabled_uplink_channels=[80, 81, 82, 83, 84, 85, 86, 87]
|
||||
|
||||
|
||||
# Rejoin-request configuration (LoRaWAN 1.1)
|
||||
[regions.network.rejoin_request]
|
||||
|
||||
# Request devices to periodically send rejoin-requests.
|
||||
enabled=false
|
||||
|
||||
# The device must send a rejoin-request type 0 at least every 2^(max_count_n + 4)
|
||||
# uplink messages. Valid values are 0 to 15.
|
||||
max_count_n=0
|
||||
|
||||
# The device must send a rejoin-request type 0 at least every 2^(max_time_n + 10)
|
||||
# seconds. Valid values are 0 to 15.
|
||||
#
|
||||
# 0 = roughly 17 minutes
|
||||
# 15 = about 1 year
|
||||
max_time_n=0
|
||||
|
||||
|
||||
# Class-B configuration.
|
||||
[regions.network.class_b]
|
||||
|
||||
# Ping-slot data-rate.
|
||||
ping_slot_dr=2
|
||||
|
||||
# Ping-slot frequency (Hz)
|
||||
#
|
||||
# set this to 0 to use the default frequency plan for the configured region
|
||||
# (which could be frequency hopping).
|
||||
ping_slot_frequency=0
|
||||
@ -1,247 +0,0 @@
|
||||
# This file contains an example CN470 example (channels 88-95).
|
||||
[[regions]]
|
||||
|
||||
# ID is an use-defined identifier for this region.
|
||||
id="cn470_11"
|
||||
|
||||
# Description is a short description for this region.
|
||||
description="CN470 (channels 88-95)"
|
||||
|
||||
# Common-name refers to the common-name of this region as defined by
|
||||
# the LoRa Alliance.
|
||||
common_name="CN470"
|
||||
|
||||
|
||||
# Gateway configuration.
|
||||
[regions.gateway]
|
||||
|
||||
# Force gateways as private.
|
||||
#
|
||||
# If enabled, gateways can only be used by devices under the same tenant.
|
||||
force_gws_private=false
|
||||
|
||||
|
||||
# Gateway backend configuration.
|
||||
[regions.gateway.backend]
|
||||
|
||||
# The enabled backend type.
|
||||
enabled="mqtt"
|
||||
|
||||
# MQTT configuration.
|
||||
[regions.gateway.backend.mqtt]
|
||||
|
||||
# Topic prefix.
|
||||
#
|
||||
# The topic prefix can be used to define the region of the gateway.
|
||||
# Note, there is no need to add a trailing '/' to the prefix. The trailing
|
||||
# '/' is automatically added to the prefix if it is configured.
|
||||
topic_prefix="cn470_11"
|
||||
|
||||
# MQTT server (e.g. scheme://host:port where scheme is tcp, ssl or ws)
|
||||
server="tcp://$MQTT_BROKER_HOST:1883"
|
||||
|
||||
# Connect with the given username (optional)
|
||||
username=""
|
||||
|
||||
# Connect with the given password (optional)
|
||||
password=""
|
||||
|
||||
# Quality of service level
|
||||
#
|
||||
# 0: at most once
|
||||
# 1: at least once
|
||||
# 2: exactly once
|
||||
#
|
||||
# Note: an increase of this value will decrease the performance.
|
||||
# For more information: https://www.hivemq.com/blog/mqtt-essentials-part-6-mqtt-quality-of-service-levels
|
||||
qos=0
|
||||
|
||||
# Clean session
|
||||
#
|
||||
# Set the "clean session" flag in the connect message when this client
|
||||
# connects to an MQTT broker. By setting this flag you are indicating
|
||||
# that no messages saved by the broker for this client should be delivered.
|
||||
clean_session=false
|
||||
|
||||
# Client ID
|
||||
#
|
||||
# Set the client id to be used by this client when connecting to the MQTT
|
||||
# broker. A client id must be no longer than 23 characters. If left blank,
|
||||
# a random id will be generated by ChirpStack.
|
||||
client_id=""
|
||||
|
||||
# Keep alive interval.
|
||||
#
|
||||
# This defines the maximum time that that should pass without communication
|
||||
# between the client and server.
|
||||
keep_alive_interval="30s"
|
||||
|
||||
# CA certificate file (optional)
|
||||
#
|
||||
# Use this when setting up a secure connection (when server uses ssl://...)
|
||||
# but the certificate used by the server is not trusted by any CA certificate
|
||||
# on the server (e.g. when self generated).
|
||||
ca_cert=""
|
||||
|
||||
# TLS certificate file (optional)
|
||||
tls_cert=""
|
||||
|
||||
# TLS key file (optional)
|
||||
tls_key=""
|
||||
|
||||
|
||||
# Gateway channel configuration.
|
||||
#
|
||||
# Note: this configuration is only used in case the gateway is using the
|
||||
# ChirpStack Concentratord daemon. In any other case, this configuration
|
||||
# is ignored.
|
||||
[[regions.gateway.channels]]
|
||||
frequency=487900000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=488100000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=488300000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=488500000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=488700000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=488900000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=489100000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=489300000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
|
||||
# Region specific network configuration.
|
||||
[regions.network]
|
||||
|
||||
# Installation margin (dB) used by the ADR engine.
|
||||
#
|
||||
# A higher number means that the network-server will keep more margin,
|
||||
# resulting in a lower data-rate but decreasing the chance that the
|
||||
# device gets disconnected because it is unable to reach one of the
|
||||
# surrounded gateways.
|
||||
installation_margin=10
|
||||
|
||||
# RX window (Class-A).
|
||||
#
|
||||
# Set this to:
|
||||
# 0: RX1 / RX2
|
||||
# 1: RX1 only
|
||||
# 2: RX2 only
|
||||
rx_window=0
|
||||
|
||||
# RX1 delay (1 - 15 seconds).
|
||||
rx1_delay=1
|
||||
|
||||
# RX1 data-rate offset
|
||||
rx1_dr_offset=0
|
||||
|
||||
# RX2 data-rate
|
||||
rx2_dr=0
|
||||
|
||||
# RX2 frequency (Hz)
|
||||
rx2_frequency=505300000
|
||||
|
||||
# Prefer RX2 on RX1 data-rate less than.
|
||||
#
|
||||
# Prefer RX2 over RX1 based on the RX1 data-rate. When the RX1 data-rate
|
||||
# is smaller than the configured value, then the Network Server will
|
||||
# first try to schedule the downlink for RX2, failing that (e.g. the gateway
|
||||
# has already a payload scheduled at the RX2 timing) it will try RX1.
|
||||
rx2_prefer_on_rx1_dr_lt=0
|
||||
|
||||
# Prefer RX2 on link budget.
|
||||
#
|
||||
# When the link-budget is better for RX2 than for RX1, the Network Server will first
|
||||
# try to schedule the downlink in RX2, failing that it will try RX1.
|
||||
rx2_prefer_on_link_budget=false
|
||||
|
||||
# Downlink TX Power (dBm)
|
||||
#
|
||||
# When set to -1, the downlink TX Power from the configured band will
|
||||
# be used.
|
||||
#
|
||||
# Please consult the LoRaWAN Regional Parameters and local regulations
|
||||
# for valid and legal options. Note that the configured TX Power must be
|
||||
# supported by your gateway(s).
|
||||
downlink_tx_power=-1
|
||||
|
||||
# ADR is disabled.
|
||||
adr_disabled=false
|
||||
|
||||
# Minimum data-rate.
|
||||
min_dr=0
|
||||
|
||||
# Maximum data-rate.
|
||||
max_dr=5
|
||||
|
||||
# Enabled uplink channels.
|
||||
#
|
||||
# Use this when ony a sub-set of the by default enabled channels are being
|
||||
# used. For example when only using the first 8 channels of the US band.
|
||||
# Note: when left blank / empty array, all channels will be enabled.
|
||||
enabled_uplink_channels=[88, 89, 90, 91, 92, 93, 94, 95]
|
||||
|
||||
|
||||
# Rejoin-request configuration (LoRaWAN 1.1)
|
||||
[regions.network.rejoin_request]
|
||||
|
||||
# Request devices to periodically send rejoin-requests.
|
||||
enabled=false
|
||||
|
||||
# The device must send a rejoin-request type 0 at least every 2^(max_count_n + 4)
|
||||
# uplink messages. Valid values are 0 to 15.
|
||||
max_count_n=0
|
||||
|
||||
# The device must send a rejoin-request type 0 at least every 2^(max_time_n + 10)
|
||||
# seconds. Valid values are 0 to 15.
|
||||
#
|
||||
# 0 = roughly 17 minutes
|
||||
# 15 = about 1 year
|
||||
max_time_n=0
|
||||
|
||||
|
||||
# Class-B configuration.
|
||||
[regions.network.class_b]
|
||||
|
||||
# Ping-slot data-rate.
|
||||
ping_slot_dr=2
|
||||
|
||||
# Ping-slot frequency (Hz)
|
||||
#
|
||||
# set this to 0 to use the default frequency plan for the configured region
|
||||
# (which could be frequency hopping).
|
||||
ping_slot_frequency=0
|
||||
@ -1,247 +0,0 @@
|
||||
# This file contains an example CN470 example (channels 16-23).
|
||||
[[regions]]
|
||||
|
||||
# ID is an use-defined identifier for this region.
|
||||
id="cn470_2"
|
||||
|
||||
# Description is a short description for this region.
|
||||
description="CN470 (channels 16-23)"
|
||||
|
||||
# Common-name refers to the common-name of this region as defined by
|
||||
# the LoRa Alliance.
|
||||
common_name="CN470"
|
||||
|
||||
|
||||
# Gateway configuration.
|
||||
[regions.gateway]
|
||||
|
||||
# Force gateways as private.
|
||||
#
|
||||
# If enabled, gateways can only be used by devices under the same tenant.
|
||||
force_gws_private=false
|
||||
|
||||
|
||||
# Gateway backend configuration.
|
||||
[regions.gateway.backend]
|
||||
|
||||
# The enabled backend type.
|
||||
enabled="mqtt"
|
||||
|
||||
# MQTT configuration.
|
||||
[regions.gateway.backend.mqtt]
|
||||
|
||||
# Topic prefix.
|
||||
#
|
||||
# The topic prefix can be used to define the region of the gateway.
|
||||
# Note, there is no need to add a trailing '/' to the prefix. The trailing
|
||||
# '/' is automatically added to the prefix if it is configured.
|
||||
topic_prefix="cn470_2"
|
||||
|
||||
# MQTT server (e.g. scheme://host:port where scheme is tcp, ssl or ws)
|
||||
server="tcp://$MQTT_BROKER_HOST:1883"
|
||||
|
||||
# Connect with the given username (optional)
|
||||
username=""
|
||||
|
||||
# Connect with the given password (optional)
|
||||
password=""
|
||||
|
||||
# Quality of service level
|
||||
#
|
||||
# 0: at most once
|
||||
# 1: at least once
|
||||
# 2: exactly once
|
||||
#
|
||||
# Note: an increase of this value will decrease the performance.
|
||||
# For more information: https://www.hivemq.com/blog/mqtt-essentials-part-6-mqtt-quality-of-service-levels
|
||||
qos=0
|
||||
|
||||
# Clean session
|
||||
#
|
||||
# Set the "clean session" flag in the connect message when this client
|
||||
# connects to an MQTT broker. By setting this flag you are indicating
|
||||
# that no messages saved by the broker for this client should be delivered.
|
||||
clean_session=false
|
||||
|
||||
# Client ID
|
||||
#
|
||||
# Set the client id to be used by this client when connecting to the MQTT
|
||||
# broker. A client id must be no longer than 23 characters. If left blank,
|
||||
# a random id will be generated by ChirpStack.
|
||||
client_id=""
|
||||
|
||||
# Keep alive interval.
|
||||
#
|
||||
# This defines the maximum time that that should pass without communication
|
||||
# between the client and server.
|
||||
keep_alive_interval="30s"
|
||||
|
||||
# CA certificate file (optional)
|
||||
#
|
||||
# Use this when setting up a secure connection (when server uses ssl://...)
|
||||
# but the certificate used by the server is not trusted by any CA certificate
|
||||
# on the server (e.g. when self generated).
|
||||
ca_cert=""
|
||||
|
||||
# TLS certificate file (optional)
|
||||
tls_cert=""
|
||||
|
||||
# TLS key file (optional)
|
||||
tls_key=""
|
||||
|
||||
|
||||
# Gateway channel configuration.
|
||||
#
|
||||
# Note: this configuration is only used in case the gateway is using the
|
||||
# ChirpStack Concentratord daemon. In any other case, this configuration
|
||||
# is ignored.
|
||||
[[regions.gateway.channels]]
|
||||
frequency=473500000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=473700000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=473900000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=474100000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=474300000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=474500000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=474700000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=474900000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
|
||||
# Region specific network configuration.
|
||||
[regions.network]
|
||||
|
||||
# Installation margin (dB) used by the ADR engine.
|
||||
#
|
||||
# A higher number means that the network-server will keep more margin,
|
||||
# resulting in a lower data-rate but decreasing the chance that the
|
||||
# device gets disconnected because it is unable to reach one of the
|
||||
# surrounded gateways.
|
||||
installation_margin=10
|
||||
|
||||
# RX window (Class-A).
|
||||
#
|
||||
# Set this to:
|
||||
# 0: RX1 / RX2
|
||||
# 1: RX1 only
|
||||
# 2: RX2 only
|
||||
rx_window=0
|
||||
|
||||
# RX1 delay (1 - 15 seconds).
|
||||
rx1_delay=1
|
||||
|
||||
# RX1 data-rate offset
|
||||
rx1_dr_offset=0
|
||||
|
||||
# RX2 data-rate
|
||||
rx2_dr=0
|
||||
|
||||
# RX2 frequency (Hz)
|
||||
rx2_frequency=505300000
|
||||
|
||||
# Prefer RX2 on RX1 data-rate less than.
|
||||
#
|
||||
# Prefer RX2 over RX1 based on the RX1 data-rate. When the RX1 data-rate
|
||||
# is smaller than the configured value, then the Network Server will
|
||||
# first try to schedule the downlink for RX2, failing that (e.g. the gateway
|
||||
# has already a payload scheduled at the RX2 timing) it will try RX1.
|
||||
rx2_prefer_on_rx1_dr_lt=0
|
||||
|
||||
# Prefer RX2 on link budget.
|
||||
#
|
||||
# When the link-budget is better for RX2 than for RX1, the Network Server will first
|
||||
# try to schedule the downlink in RX2, failing that it will try RX1.
|
||||
rx2_prefer_on_link_budget=false
|
||||
|
||||
# Downlink TX Power (dBm)
|
||||
#
|
||||
# When set to -1, the downlink TX Power from the configured band will
|
||||
# be used.
|
||||
#
|
||||
# Please consult the LoRaWAN Regional Parameters and local regulations
|
||||
# for valid and legal options. Note that the configured TX Power must be
|
||||
# supported by your gateway(s).
|
||||
downlink_tx_power=-1
|
||||
|
||||
# ADR is disabled.
|
||||
adr_disabled=false
|
||||
|
||||
# Minimum data-rate.
|
||||
min_dr=0
|
||||
|
||||
# Maximum data-rate.
|
||||
max_dr=5
|
||||
|
||||
# Enabled uplink channels.
|
||||
#
|
||||
# Use this when ony a sub-set of the by default enabled channels are being
|
||||
# used. For example when only using the first 8 channels of the US band.
|
||||
# Note: when left blank / empty array, all channels will be enabled.
|
||||
enabled_uplink_channels=[16, 17, 18, 19, 20, 21, 22, 23]
|
||||
|
||||
|
||||
# Rejoin-request configuration (LoRaWAN 1.1)
|
||||
[regions.network.rejoin_request]
|
||||
|
||||
# Request devices to periodically send rejoin-requests.
|
||||
enabled=false
|
||||
|
||||
# The device must send a rejoin-request type 0 at least every 2^(max_count_n + 4)
|
||||
# uplink messages. Valid values are 0 to 15.
|
||||
max_count_n=0
|
||||
|
||||
# The device must send a rejoin-request type 0 at least every 2^(max_time_n + 10)
|
||||
# seconds. Valid values are 0 to 15.
|
||||
#
|
||||
# 0 = roughly 17 minutes
|
||||
# 15 = about 1 year
|
||||
max_time_n=0
|
||||
|
||||
|
||||
# Class-B configuration.
|
||||
[regions.network.class_b]
|
||||
|
||||
# Ping-slot data-rate.
|
||||
ping_slot_dr=2
|
||||
|
||||
# Ping-slot frequency (Hz)
|
||||
#
|
||||
# set this to 0 to use the default frequency plan for the configured region
|
||||
# (which could be frequency hopping).
|
||||
ping_slot_frequency=0
|
||||
@ -1,247 +0,0 @@
|
||||
# This file contains an example CN470 example (channels 24-31).
|
||||
[[regions]]
|
||||
|
||||
# ID is an use-defined identifier for this region.
|
||||
id="cn470_3"
|
||||
|
||||
# Description is a short description for this region.
|
||||
description="CN470 (channels 24-31)"
|
||||
|
||||
# Common-name refers to the common-name of this region as defined by
|
||||
# the LoRa Alliance.
|
||||
common_name="CN470"
|
||||
|
||||
|
||||
# Gateway configuration.
|
||||
[regions.gateway]
|
||||
|
||||
# Force gateways as private.
|
||||
#
|
||||
# If enabled, gateways can only be used by devices under the same tenant.
|
||||
force_gws_private=false
|
||||
|
||||
|
||||
# Gateway backend configuration.
|
||||
[regions.gateway.backend]
|
||||
|
||||
# The enabled backend type.
|
||||
enabled="mqtt"
|
||||
|
||||
# MQTT configuration.
|
||||
[regions.gateway.backend.mqtt]
|
||||
|
||||
# Topic prefix.
|
||||
#
|
||||
# The topic prefix can be used to define the region of the gateway.
|
||||
# Note, there is no need to add a trailing '/' to the prefix. The trailing
|
||||
# '/' is automatically added to the prefix if it is configured.
|
||||
topic_prefix="cn470_3"
|
||||
|
||||
# MQTT server (e.g. scheme://host:port where scheme is tcp, ssl or ws)
|
||||
server="tcp://$MQTT_BROKER_HOST:1883"
|
||||
|
||||
# Connect with the given username (optional)
|
||||
username=""
|
||||
|
||||
# Connect with the given password (optional)
|
||||
password=""
|
||||
|
||||
# Quality of service level
|
||||
#
|
||||
# 0: at most once
|
||||
# 1: at least once
|
||||
# 2: exactly once
|
||||
#
|
||||
# Note: an increase of this value will decrease the performance.
|
||||
# For more information: https://www.hivemq.com/blog/mqtt-essentials-part-6-mqtt-quality-of-service-levels
|
||||
qos=0
|
||||
|
||||
# Clean session
|
||||
#
|
||||
# Set the "clean session" flag in the connect message when this client
|
||||
# connects to an MQTT broker. By setting this flag you are indicating
|
||||
# that no messages saved by the broker for this client should be delivered.
|
||||
clean_session=false
|
||||
|
||||
# Client ID
|
||||
#
|
||||
# Set the client id to be used by this client when connecting to the MQTT
|
||||
# broker. A client id must be no longer than 23 characters. If left blank,
|
||||
# a random id will be generated by ChirpStack.
|
||||
client_id=""
|
||||
|
||||
# Keep alive interval.
|
||||
#
|
||||
# This defines the maximum time that that should pass without communication
|
||||
# between the client and server.
|
||||
keep_alive_interval="30s"
|
||||
|
||||
# CA certificate file (optional)
|
||||
#
|
||||
# Use this when setting up a secure connection (when server uses ssl://...)
|
||||
# but the certificate used by the server is not trusted by any CA certificate
|
||||
# on the server (e.g. when self generated).
|
||||
ca_cert=""
|
||||
|
||||
# TLS certificate file (optional)
|
||||
tls_cert=""
|
||||
|
||||
# TLS key file (optional)
|
||||
tls_key=""
|
||||
|
||||
|
||||
# Gateway channel configuration.
|
||||
#
|
||||
# Note: this configuration is only used in case the gateway is using the
|
||||
# ChirpStack Concentratord daemon. In any other case, this configuration
|
||||
# is ignored.
|
||||
[[regions.gateway.channels]]
|
||||
frequency=475100000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=475300000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=475500000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=475700000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=475900000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=476100000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=476300000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=476500000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
|
||||
# Region specific network configuration.
|
||||
[regions.network]
|
||||
|
||||
# Installation margin (dB) used by the ADR engine.
|
||||
#
|
||||
# A higher number means that the network-server will keep more margin,
|
||||
# resulting in a lower data-rate but decreasing the chance that the
|
||||
# device gets disconnected because it is unable to reach one of the
|
||||
# surrounded gateways.
|
||||
installation_margin=10
|
||||
|
||||
# RX window (Class-A).
|
||||
#
|
||||
# Set this to:
|
||||
# 0: RX1 / RX2
|
||||
# 1: RX1 only
|
||||
# 2: RX2 only
|
||||
rx_window=0
|
||||
|
||||
# RX1 delay (1 - 15 seconds).
|
||||
rx1_delay=1
|
||||
|
||||
# RX1 data-rate offset
|
||||
rx1_dr_offset=0
|
||||
|
||||
# RX2 data-rate
|
||||
rx2_dr=0
|
||||
|
||||
# RX2 frequency (Hz)
|
||||
rx2_frequency=505300000
|
||||
|
||||
# Prefer RX2 on RX1 data-rate less than.
|
||||
#
|
||||
# Prefer RX2 over RX1 based on the RX1 data-rate. When the RX1 data-rate
|
||||
# is smaller than the configured value, then the Network Server will
|
||||
# first try to schedule the downlink for RX2, failing that (e.g. the gateway
|
||||
# has already a payload scheduled at the RX2 timing) it will try RX1.
|
||||
rx2_prefer_on_rx1_dr_lt=0
|
||||
|
||||
# Prefer RX2 on link budget.
|
||||
#
|
||||
# When the link-budget is better for RX2 than for RX1, the Network Server will first
|
||||
# try to schedule the downlink in RX2, failing that it will try RX1.
|
||||
rx2_prefer_on_link_budget=false
|
||||
|
||||
# Downlink TX Power (dBm)
|
||||
#
|
||||
# When set to -1, the downlink TX Power from the configured band will
|
||||
# be used.
|
||||
#
|
||||
# Please consult the LoRaWAN Regional Parameters and local regulations
|
||||
# for valid and legal options. Note that the configured TX Power must be
|
||||
# supported by your gateway(s).
|
||||
downlink_tx_power=-1
|
||||
|
||||
# ADR is disabled.
|
||||
adr_disabled=false
|
||||
|
||||
# Minimum data-rate.
|
||||
min_dr=0
|
||||
|
||||
# Maximum data-rate.
|
||||
max_dr=5
|
||||
|
||||
# Enabled uplink channels.
|
||||
#
|
||||
# Use this when ony a sub-set of the by default enabled channels are being
|
||||
# used. For example when only using the first 8 channels of the US band.
|
||||
# Note: when left blank / empty array, all channels will be enabled.
|
||||
enabled_uplink_channels=[24, 25, 26, 27, 28, 29, 30, 31]
|
||||
|
||||
|
||||
# Rejoin-request configuration (LoRaWAN 1.1)
|
||||
[regions.network.rejoin_request]
|
||||
|
||||
# Request devices to periodically send rejoin-requests.
|
||||
enabled=false
|
||||
|
||||
# The device must send a rejoin-request type 0 at least every 2^(max_count_n + 4)
|
||||
# uplink messages. Valid values are 0 to 15.
|
||||
max_count_n=0
|
||||
|
||||
# The device must send a rejoin-request type 0 at least every 2^(max_time_n + 10)
|
||||
# seconds. Valid values are 0 to 15.
|
||||
#
|
||||
# 0 = roughly 17 minutes
|
||||
# 15 = about 1 year
|
||||
max_time_n=0
|
||||
|
||||
|
||||
# Class-B configuration.
|
||||
[regions.network.class_b]
|
||||
|
||||
# Ping-slot data-rate.
|
||||
ping_slot_dr=2
|
||||
|
||||
# Ping-slot frequency (Hz)
|
||||
#
|
||||
# set this to 0 to use the default frequency plan for the configured region
|
||||
# (which could be frequency hopping).
|
||||
ping_slot_frequency=0
|
||||
@ -1,247 +0,0 @@
|
||||
# This file contains an example CN470 example (channels 32-39).
|
||||
[[regions]]
|
||||
|
||||
# ID is an use-defined identifier for this region.
|
||||
id="cn470_4"
|
||||
|
||||
# Description is a short description for this region.
|
||||
description="CN470 (channels 32-39)"
|
||||
|
||||
# Common-name refers to the common-name of this region as defined by
|
||||
# the LoRa Alliance.
|
||||
common_name="CN470"
|
||||
|
||||
|
||||
# Gateway configuration.
|
||||
[regions.gateway]
|
||||
|
||||
# Force gateways as private.
|
||||
#
|
||||
# If enabled, gateways can only be used by devices under the same tenant.
|
||||
force_gws_private=false
|
||||
|
||||
|
||||
# Gateway backend configuration.
|
||||
[regions.gateway.backend]
|
||||
|
||||
# The enabled backend type.
|
||||
enabled="mqtt"
|
||||
|
||||
# MQTT configuration.
|
||||
[regions.gateway.backend.mqtt]
|
||||
|
||||
# Topic prefix.
|
||||
#
|
||||
# The topic prefix can be used to define the region of the gateway.
|
||||
# Note, there is no need to add a trailing '/' to the prefix. The trailing
|
||||
# '/' is automatically added to the prefix if it is configured.
|
||||
topic_prefix="cn470_4"
|
||||
|
||||
# MQTT server (e.g. scheme://host:port where scheme is tcp, ssl or ws)
|
||||
server="tcp://$MQTT_BROKER_HOST:1883"
|
||||
|
||||
# Connect with the given username (optional)
|
||||
username=""
|
||||
|
||||
# Connect with the given password (optional)
|
||||
password=""
|
||||
|
||||
# Quality of service level
|
||||
#
|
||||
# 0: at most once
|
||||
# 1: at least once
|
||||
# 2: exactly once
|
||||
#
|
||||
# Note: an increase of this value will decrease the performance.
|
||||
# For more information: https://www.hivemq.com/blog/mqtt-essentials-part-6-mqtt-quality-of-service-levels
|
||||
qos=0
|
||||
|
||||
# Clean session
|
||||
#
|
||||
# Set the "clean session" flag in the connect message when this client
|
||||
# connects to an MQTT broker. By setting this flag you are indicating
|
||||
# that no messages saved by the broker for this client should be delivered.
|
||||
clean_session=false
|
||||
|
||||
# Client ID
|
||||
#
|
||||
# Set the client id to be used by this client when connecting to the MQTT
|
||||
# broker. A client id must be no longer than 23 characters. If left blank,
|
||||
# a random id will be generated by ChirpStack.
|
||||
client_id=""
|
||||
|
||||
# Keep alive interval.
|
||||
#
|
||||
# This defines the maximum time that that should pass without communication
|
||||
# between the client and server.
|
||||
keep_alive_interval="30s"
|
||||
|
||||
# CA certificate file (optional)
|
||||
#
|
||||
# Use this when setting up a secure connection (when server uses ssl://...)
|
||||
# but the certificate used by the server is not trusted by any CA certificate
|
||||
# on the server (e.g. when self generated).
|
||||
ca_cert=""
|
||||
|
||||
# TLS certificate file (optional)
|
||||
tls_cert=""
|
||||
|
||||
# TLS key file (optional)
|
||||
tls_key=""
|
||||
|
||||
|
||||
# Gateway channel configuration.
|
||||
#
|
||||
# Note: this configuration is only used in case the gateway is using the
|
||||
# ChirpStack Concentratord daemon. In any other case, this configuration
|
||||
# is ignored.
|
||||
[[regions.gateway.channels]]
|
||||
frequency=476700000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=476900000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=477100000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=477300000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=477500000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=477700000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=477900000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=478100000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
|
||||
# Region specific network configuration.
|
||||
[regions.network]
|
||||
|
||||
# Installation margin (dB) used by the ADR engine.
|
||||
#
|
||||
# A higher number means that the network-server will keep more margin,
|
||||
# resulting in a lower data-rate but decreasing the chance that the
|
||||
# device gets disconnected because it is unable to reach one of the
|
||||
# surrounded gateways.
|
||||
installation_margin=10
|
||||
|
||||
# RX window (Class-A).
|
||||
#
|
||||
# Set this to:
|
||||
# 0: RX1 / RX2
|
||||
# 1: RX1 only
|
||||
# 2: RX2 only
|
||||
rx_window=0
|
||||
|
||||
# RX1 delay (1 - 15 seconds).
|
||||
rx1_delay=1
|
||||
|
||||
# RX1 data-rate offset
|
||||
rx1_dr_offset=0
|
||||
|
||||
# RX2 data-rate
|
||||
rx2_dr=0
|
||||
|
||||
# RX2 frequency (Hz)
|
||||
rx2_frequency=505300000
|
||||
|
||||
# Prefer RX2 on RX1 data-rate less than.
|
||||
#
|
||||
# Prefer RX2 over RX1 based on the RX1 data-rate. When the RX1 data-rate
|
||||
# is smaller than the configured value, then the Network Server will
|
||||
# first try to schedule the downlink for RX2, failing that (e.g. the gateway
|
||||
# has already a payload scheduled at the RX2 timing) it will try RX1.
|
||||
rx2_prefer_on_rx1_dr_lt=0
|
||||
|
||||
# Prefer RX2 on link budget.
|
||||
#
|
||||
# When the link-budget is better for RX2 than for RX1, the Network Server will first
|
||||
# try to schedule the downlink in RX2, failing that it will try RX1.
|
||||
rx2_prefer_on_link_budget=false
|
||||
|
||||
# Downlink TX Power (dBm)
|
||||
#
|
||||
# When set to -1, the downlink TX Power from the configured band will
|
||||
# be used.
|
||||
#
|
||||
# Please consult the LoRaWAN Regional Parameters and local regulations
|
||||
# for valid and legal options. Note that the configured TX Power must be
|
||||
# supported by your gateway(s).
|
||||
downlink_tx_power=-1
|
||||
|
||||
# ADR is disabled.
|
||||
adr_disabled=false
|
||||
|
||||
# Minimum data-rate.
|
||||
min_dr=0
|
||||
|
||||
# Maximum data-rate.
|
||||
max_dr=5
|
||||
|
||||
# Enabled uplink channels.
|
||||
#
|
||||
# Use this when ony a sub-set of the by default enabled channels are being
|
||||
# used. For example when only using the first 8 channels of the US band.
|
||||
# Note: when left blank / empty array, all channels will be enabled.
|
||||
enabled_uplink_channels=[32, 33, 34, 35, 36, 37, 38, 39]
|
||||
|
||||
|
||||
# Rejoin-request configuration (LoRaWAN 1.1)
|
||||
[regions.network.rejoin_request]
|
||||
|
||||
# Request devices to periodically send rejoin-requests.
|
||||
enabled=false
|
||||
|
||||
# The device must send a rejoin-request type 0 at least every 2^(max_count_n + 4)
|
||||
# uplink messages. Valid values are 0 to 15.
|
||||
max_count_n=0
|
||||
|
||||
# The device must send a rejoin-request type 0 at least every 2^(max_time_n + 10)
|
||||
# seconds. Valid values are 0 to 15.
|
||||
#
|
||||
# 0 = roughly 17 minutes
|
||||
# 15 = about 1 year
|
||||
max_time_n=0
|
||||
|
||||
|
||||
# Class-B configuration.
|
||||
[regions.network.class_b]
|
||||
|
||||
# Ping-slot data-rate.
|
||||
ping_slot_dr=2
|
||||
|
||||
# Ping-slot frequency (Hz)
|
||||
#
|
||||
# set this to 0 to use the default frequency plan for the configured region
|
||||
# (which could be frequency hopping).
|
||||
ping_slot_frequency=0
|
||||
@ -1,247 +0,0 @@
|
||||
# This file contains an example CN470 example (channels 40-47).
|
||||
[[regions]]
|
||||
|
||||
# ID is an use-defined identifier for this region.
|
||||
id="cn470_5"
|
||||
|
||||
# Description is a short description for this region.
|
||||
description="CN470 (channels 40-47)"
|
||||
|
||||
# Common-name refers to the common-name of this region as defined by
|
||||
# the LoRa Alliance.
|
||||
common_name="CN470"
|
||||
|
||||
|
||||
# Gateway configuration.
|
||||
[regions.gateway]
|
||||
|
||||
# Force gateways as private.
|
||||
#
|
||||
# If enabled, gateways can only be used by devices under the same tenant.
|
||||
force_gws_private=false
|
||||
|
||||
|
||||
# Gateway backend configuration.
|
||||
[regions.gateway.backend]
|
||||
|
||||
# The enabled backend type.
|
||||
enabled="mqtt"
|
||||
|
||||
# MQTT configuration.
|
||||
[regions.gateway.backend.mqtt]
|
||||
|
||||
# Topic prefix.
|
||||
#
|
||||
# The topic prefix can be used to define the region of the gateway.
|
||||
# Note, there is no need to add a trailing '/' to the prefix. The trailing
|
||||
# '/' is automatically added to the prefix if it is configured.
|
||||
topic_prefix="cn470_5"
|
||||
|
||||
# MQTT server (e.g. scheme://host:port where scheme is tcp, ssl or ws)
|
||||
server="tcp://$MQTT_BROKER_HOST:1883"
|
||||
|
||||
# Connect with the given username (optional)
|
||||
username=""
|
||||
|
||||
# Connect with the given password (optional)
|
||||
password=""
|
||||
|
||||
# Quality of service level
|
||||
#
|
||||
# 0: at most once
|
||||
# 1: at least once
|
||||
# 2: exactly once
|
||||
#
|
||||
# Note: an increase of this value will decrease the performance.
|
||||
# For more information: https://www.hivemq.com/blog/mqtt-essentials-part-6-mqtt-quality-of-service-levels
|
||||
qos=0
|
||||
|
||||
# Clean session
|
||||
#
|
||||
# Set the "clean session" flag in the connect message when this client
|
||||
# connects to an MQTT broker. By setting this flag you are indicating
|
||||
# that no messages saved by the broker for this client should be delivered.
|
||||
clean_session=false
|
||||
|
||||
# Client ID
|
||||
#
|
||||
# Set the client id to be used by this client when connecting to the MQTT
|
||||
# broker. A client id must be no longer than 23 characters. If left blank,
|
||||
# a random id will be generated by ChirpStack.
|
||||
client_id=""
|
||||
|
||||
# Keep alive interval.
|
||||
#
|
||||
# This defines the maximum time that that should pass without communication
|
||||
# between the client and server.
|
||||
keep_alive_interval="30s"
|
||||
|
||||
# CA certificate file (optional)
|
||||
#
|
||||
# Use this when setting up a secure connection (when server uses ssl://...)
|
||||
# but the certificate used by the server is not trusted by any CA certificate
|
||||
# on the server (e.g. when self generated).
|
||||
ca_cert=""
|
||||
|
||||
# TLS certificate file (optional)
|
||||
tls_cert=""
|
||||
|
||||
# TLS key file (optional)
|
||||
tls_key=""
|
||||
|
||||
|
||||
# Gateway channel configuration.
|
||||
#
|
||||
# Note: this configuration is only used in case the gateway is using the
|
||||
# ChirpStack Concentratord daemon. In any other case, this configuration
|
||||
# is ignored.
|
||||
[[regions.gateway.channels]]
|
||||
frequency=478300000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=478500000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=478700000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=478900000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=479100000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=479300000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=479500000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=479700000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
|
||||
# Region specific network configuration.
|
||||
[regions.network]
|
||||
|
||||
# Installation margin (dB) used by the ADR engine.
|
||||
#
|
||||
# A higher number means that the network-server will keep more margin,
|
||||
# resulting in a lower data-rate but decreasing the chance that the
|
||||
# device gets disconnected because it is unable to reach one of the
|
||||
# surrounded gateways.
|
||||
installation_margin=10
|
||||
|
||||
# RX window (Class-A).
|
||||
#
|
||||
# Set this to:
|
||||
# 0: RX1 / RX2
|
||||
# 1: RX1 only
|
||||
# 2: RX2 only
|
||||
rx_window=0
|
||||
|
||||
# RX1 delay (1 - 15 seconds).
|
||||
rx1_delay=1
|
||||
|
||||
# RX1 data-rate offset
|
||||
rx1_dr_offset=0
|
||||
|
||||
# RX2 data-rate
|
||||
rx2_dr=0
|
||||
|
||||
# RX2 frequency (Hz)
|
||||
rx2_frequency=505300000
|
||||
|
||||
# Prefer RX2 on RX1 data-rate less than.
|
||||
#
|
||||
# Prefer RX2 over RX1 based on the RX1 data-rate. When the RX1 data-rate
|
||||
# is smaller than the configured value, then the Network Server will
|
||||
# first try to schedule the downlink for RX2, failing that (e.g. the gateway
|
||||
# has already a payload scheduled at the RX2 timing) it will try RX1.
|
||||
rx2_prefer_on_rx1_dr_lt=0
|
||||
|
||||
# Prefer RX2 on link budget.
|
||||
#
|
||||
# When the link-budget is better for RX2 than for RX1, the Network Server will first
|
||||
# try to schedule the downlink in RX2, failing that it will try RX1.
|
||||
rx2_prefer_on_link_budget=false
|
||||
|
||||
# Downlink TX Power (dBm)
|
||||
#
|
||||
# When set to -1, the downlink TX Power from the configured band will
|
||||
# be used.
|
||||
#
|
||||
# Please consult the LoRaWAN Regional Parameters and local regulations
|
||||
# for valid and legal options. Note that the configured TX Power must be
|
||||
# supported by your gateway(s).
|
||||
downlink_tx_power=-1
|
||||
|
||||
# ADR is disabled.
|
||||
adr_disabled=false
|
||||
|
||||
# Minimum data-rate.
|
||||
min_dr=0
|
||||
|
||||
# Maximum data-rate.
|
||||
max_dr=5
|
||||
|
||||
# Enabled uplink channels.
|
||||
#
|
||||
# Use this when ony a sub-set of the by default enabled channels are being
|
||||
# used. For example when only using the first 8 channels of the US band.
|
||||
# Note: when left blank / empty array, all channels will be enabled.
|
||||
enabled_uplink_channels=[40, 41, 42, 43, 44, 45, 46, 47]
|
||||
|
||||
|
||||
# Rejoin-request configuration (LoRaWAN 1.1)
|
||||
[regions.network.rejoin_request]
|
||||
|
||||
# Request devices to periodically send rejoin-requests.
|
||||
enabled=false
|
||||
|
||||
# The device must send a rejoin-request type 0 at least every 2^(max_count_n + 4)
|
||||
# uplink messages. Valid values are 0 to 15.
|
||||
max_count_n=0
|
||||
|
||||
# The device must send a rejoin-request type 0 at least every 2^(max_time_n + 10)
|
||||
# seconds. Valid values are 0 to 15.
|
||||
#
|
||||
# 0 = roughly 17 minutes
|
||||
# 15 = about 1 year
|
||||
max_time_n=0
|
||||
|
||||
|
||||
# Class-B configuration.
|
||||
[regions.network.class_b]
|
||||
|
||||
# Ping-slot data-rate.
|
||||
ping_slot_dr=2
|
||||
|
||||
# Ping-slot frequency (Hz)
|
||||
#
|
||||
# set this to 0 to use the default frequency plan for the configured region
|
||||
# (which could be frequency hopping).
|
||||
ping_slot_frequency=0
|
||||
@ -1,247 +0,0 @@
|
||||
# This file contains an example CN470 example (channels 48-55).
|
||||
[[regions]]
|
||||
|
||||
# ID is an use-defined identifier for this region.
|
||||
id="cn470_6"
|
||||
|
||||
# Description is a short description for this region.
|
||||
description="CN470 (channels 48-55)"
|
||||
|
||||
# Common-name refers to the common-name of this region as defined by
|
||||
# the LoRa Alliance.
|
||||
common_name="CN470"
|
||||
|
||||
|
||||
# Gateway configuration.
|
||||
[regions.gateway]
|
||||
|
||||
# Force gateways as private.
|
||||
#
|
||||
# If enabled, gateways can only be used by devices under the same tenant.
|
||||
force_gws_private=false
|
||||
|
||||
|
||||
# Gateway backend configuration.
|
||||
[regions.gateway.backend]
|
||||
|
||||
# The enabled backend type.
|
||||
enabled="mqtt"
|
||||
|
||||
# MQTT configuration.
|
||||
[regions.gateway.backend.mqtt]
|
||||
|
||||
# Topic prefix.
|
||||
#
|
||||
# The topic prefix can be used to define the region of the gateway.
|
||||
# Note, there is no need to add a trailing '/' to the prefix. The trailing
|
||||
# '/' is automatically added to the prefix if it is configured.
|
||||
topic_prefix="cn470_6"
|
||||
|
||||
# MQTT server (e.g. scheme://host:port where scheme is tcp, ssl or ws)
|
||||
server="tcp://$MQTT_BROKER_HOST:1883"
|
||||
|
||||
# Connect with the given username (optional)
|
||||
username=""
|
||||
|
||||
# Connect with the given password (optional)
|
||||
password=""
|
||||
|
||||
# Quality of service level
|
||||
#
|
||||
# 0: at most once
|
||||
# 1: at least once
|
||||
# 2: exactly once
|
||||
#
|
||||
# Note: an increase of this value will decrease the performance.
|
||||
# For more information: https://www.hivemq.com/blog/mqtt-essentials-part-6-mqtt-quality-of-service-levels
|
||||
qos=0
|
||||
|
||||
# Clean session
|
||||
#
|
||||
# Set the "clean session" flag in the connect message when this client
|
||||
# connects to an MQTT broker. By setting this flag you are indicating
|
||||
# that no messages saved by the broker for this client should be delivered.
|
||||
clean_session=false
|
||||
|
||||
# Client ID
|
||||
#
|
||||
# Set the client id to be used by this client when connecting to the MQTT
|
||||
# broker. A client id must be no longer than 23 characters. If left blank,
|
||||
# a random id will be generated by ChirpStack.
|
||||
client_id=""
|
||||
|
||||
# Keep alive interval.
|
||||
#
|
||||
# This defines the maximum time that that should pass without communication
|
||||
# between the client and server.
|
||||
keep_alive_interval="30s"
|
||||
|
||||
# CA certificate file (optional)
|
||||
#
|
||||
# Use this when setting up a secure connection (when server uses ssl://...)
|
||||
# but the certificate used by the server is not trusted by any CA certificate
|
||||
# on the server (e.g. when self generated).
|
||||
ca_cert=""
|
||||
|
||||
# TLS certificate file (optional)
|
||||
tls_cert=""
|
||||
|
||||
# TLS key file (optional)
|
||||
tls_key=""
|
||||
|
||||
|
||||
# Gateway channel configuration.
|
||||
#
|
||||
# Note: this configuration is only used in case the gateway is using the
|
||||
# ChirpStack Concentratord daemon. In any other case, this configuration
|
||||
# is ignored.
|
||||
[[regions.gateway.channels]]
|
||||
frequency=479900000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=480100000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=480300000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=480500000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=480700000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=480900000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=481100000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=481300000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
|
||||
# Region specific network configuration.
|
||||
[regions.network]
|
||||
|
||||
# Installation margin (dB) used by the ADR engine.
|
||||
#
|
||||
# A higher number means that the network-server will keep more margin,
|
||||
# resulting in a lower data-rate but decreasing the chance that the
|
||||
# device gets disconnected because it is unable to reach one of the
|
||||
# surrounded gateways.
|
||||
installation_margin=10
|
||||
|
||||
# RX window (Class-A).
|
||||
#
|
||||
# Set this to:
|
||||
# 0: RX1 / RX2
|
||||
# 1: RX1 only
|
||||
# 2: RX2 only
|
||||
rx_window=0
|
||||
|
||||
# RX1 delay (1 - 15 seconds).
|
||||
rx1_delay=1
|
||||
|
||||
# RX1 data-rate offset
|
||||
rx1_dr_offset=0
|
||||
|
||||
# RX2 data-rate
|
||||
rx2_dr=0
|
||||
|
||||
# RX2 frequency (Hz)
|
||||
rx2_frequency=505300000
|
||||
|
||||
# Prefer RX2 on RX1 data-rate less than.
|
||||
#
|
||||
# Prefer RX2 over RX1 based on the RX1 data-rate. When the RX1 data-rate
|
||||
# is smaller than the configured value, then the Network Server will
|
||||
# first try to schedule the downlink for RX2, failing that (e.g. the gateway
|
||||
# has already a payload scheduled at the RX2 timing) it will try RX1.
|
||||
rx2_prefer_on_rx1_dr_lt=0
|
||||
|
||||
# Prefer RX2 on link budget.
|
||||
#
|
||||
# When the link-budget is better for RX2 than for RX1, the Network Server will first
|
||||
# try to schedule the downlink in RX2, failing that it will try RX1.
|
||||
rx2_prefer_on_link_budget=false
|
||||
|
||||
# Downlink TX Power (dBm)
|
||||
#
|
||||
# When set to -1, the downlink TX Power from the configured band will
|
||||
# be used.
|
||||
#
|
||||
# Please consult the LoRaWAN Regional Parameters and local regulations
|
||||
# for valid and legal options. Note that the configured TX Power must be
|
||||
# supported by your gateway(s).
|
||||
downlink_tx_power=-1
|
||||
|
||||
# ADR is disabled.
|
||||
adr_disabled=false
|
||||
|
||||
# Minimum data-rate.
|
||||
min_dr=0
|
||||
|
||||
# Maximum data-rate.
|
||||
max_dr=5
|
||||
|
||||
# Enabled uplink channels.
|
||||
#
|
||||
# Use this when ony a sub-set of the by default enabled channels are being
|
||||
# used. For example when only using the first 8 channels of the US band.
|
||||
# Note: when left blank / empty array, all channels will be enabled.
|
||||
enabled_uplink_channels=[48, 49, 50, 51, 52, 53, 54, 55]
|
||||
|
||||
|
||||
# Rejoin-request configuration (LoRaWAN 1.1)
|
||||
[regions.network.rejoin_request]
|
||||
|
||||
# Request devices to periodically send rejoin-requests.
|
||||
enabled=false
|
||||
|
||||
# The device must send a rejoin-request type 0 at least every 2^(max_count_n + 4)
|
||||
# uplink messages. Valid values are 0 to 15.
|
||||
max_count_n=0
|
||||
|
||||
# The device must send a rejoin-request type 0 at least every 2^(max_time_n + 10)
|
||||
# seconds. Valid values are 0 to 15.
|
||||
#
|
||||
# 0 = roughly 17 minutes
|
||||
# 15 = about 1 year
|
||||
max_time_n=0
|
||||
|
||||
|
||||
# Class-B configuration.
|
||||
[regions.network.class_b]
|
||||
|
||||
# Ping-slot data-rate.
|
||||
ping_slot_dr=2
|
||||
|
||||
# Ping-slot frequency (Hz)
|
||||
#
|
||||
# set this to 0 to use the default frequency plan for the configured region
|
||||
# (which could be frequency hopping).
|
||||
ping_slot_frequency=0
|
||||
@ -1,247 +0,0 @@
|
||||
# This file contains an example CN470 example (channels 56-63).
|
||||
[[regions]]
|
||||
|
||||
# ID is an use-defined identifier for this region.
|
||||
id="cn470_7"
|
||||
|
||||
# Description is a short description for this region.
|
||||
description="CN470 (channels 56-63)"
|
||||
|
||||
# Common-name refers to the common-name of this region as defined by
|
||||
# the LoRa Alliance.
|
||||
common_name="CN470"
|
||||
|
||||
|
||||
# Gateway configuration.
|
||||
[regions.gateway]
|
||||
|
||||
# Force gateways as private.
|
||||
#
|
||||
# If enabled, gateways can only be used by devices under the same tenant.
|
||||
force_gws_private=false
|
||||
|
||||
|
||||
# Gateway backend configuration.
|
||||
[regions.gateway.backend]
|
||||
|
||||
# The enabled backend type.
|
||||
enabled="mqtt"
|
||||
|
||||
# MQTT configuration.
|
||||
[regions.gateway.backend.mqtt]
|
||||
|
||||
# Topic prefix.
|
||||
#
|
||||
# The topic prefix can be used to define the region of the gateway.
|
||||
# Note, there is no need to add a trailing '/' to the prefix. The trailing
|
||||
# '/' is automatically added to the prefix if it is configured.
|
||||
topic_prefix="cn470_7"
|
||||
|
||||
# MQTT server (e.g. scheme://host:port where scheme is tcp, ssl or ws)
|
||||
server="tcp://$MQTT_BROKER_HOST:1883"
|
||||
|
||||
# Connect with the given username (optional)
|
||||
username=""
|
||||
|
||||
# Connect with the given password (optional)
|
||||
password=""
|
||||
|
||||
# Quality of service level
|
||||
#
|
||||
# 0: at most once
|
||||
# 1: at least once
|
||||
# 2: exactly once
|
||||
#
|
||||
# Note: an increase of this value will decrease the performance.
|
||||
# For more information: https://www.hivemq.com/blog/mqtt-essentials-part-6-mqtt-quality-of-service-levels
|
||||
qos=0
|
||||
|
||||
# Clean session
|
||||
#
|
||||
# Set the "clean session" flag in the connect message when this client
|
||||
# connects to an MQTT broker. By setting this flag you are indicating
|
||||
# that no messages saved by the broker for this client should be delivered.
|
||||
clean_session=false
|
||||
|
||||
# Client ID
|
||||
#
|
||||
# Set the client id to be used by this client when connecting to the MQTT
|
||||
# broker. A client id must be no longer than 23 characters. If left blank,
|
||||
# a random id will be generated by ChirpStack.
|
||||
client_id=""
|
||||
|
||||
# Keep alive interval.
|
||||
#
|
||||
# This defines the maximum time that that should pass without communication
|
||||
# between the client and server.
|
||||
keep_alive_interval="30s"
|
||||
|
||||
# CA certificate file (optional)
|
||||
#
|
||||
# Use this when setting up a secure connection (when server uses ssl://...)
|
||||
# but the certificate used by the server is not trusted by any CA certificate
|
||||
# on the server (e.g. when self generated).
|
||||
ca_cert=""
|
||||
|
||||
# TLS certificate file (optional)
|
||||
tls_cert=""
|
||||
|
||||
# TLS key file (optional)
|
||||
tls_key=""
|
||||
|
||||
|
||||
# Gateway channel configuration.
|
||||
#
|
||||
# Note: this configuration is only used in case the gateway is using the
|
||||
# ChirpStack Concentratord daemon. In any other case, this configuration
|
||||
# is ignored.
|
||||
[[regions.gateway.channels]]
|
||||
frequency=481500000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=481700000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=481900000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=482100000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=482300000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=482500000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=482700000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=482900000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
|
||||
# Region specific network configuration.
|
||||
[regions.network]
|
||||
|
||||
# Installation margin (dB) used by the ADR engine.
|
||||
#
|
||||
# A higher number means that the network-server will keep more margin,
|
||||
# resulting in a lower data-rate but decreasing the chance that the
|
||||
# device gets disconnected because it is unable to reach one of the
|
||||
# surrounded gateways.
|
||||
installation_margin=10
|
||||
|
||||
# RX window (Class-A).
|
||||
#
|
||||
# Set this to:
|
||||
# 0: RX1 / RX2
|
||||
# 1: RX1 only
|
||||
# 2: RX2 only
|
||||
rx_window=0
|
||||
|
||||
# RX1 delay (1 - 15 seconds).
|
||||
rx1_delay=1
|
||||
|
||||
# RX1 data-rate offset
|
||||
rx1_dr_offset=0
|
||||
|
||||
# RX2 data-rate
|
||||
rx2_dr=0
|
||||
|
||||
# RX2 frequency (Hz)
|
||||
rx2_frequency=505300000
|
||||
|
||||
# Prefer RX2 on RX1 data-rate less than.
|
||||
#
|
||||
# Prefer RX2 over RX1 based on the RX1 data-rate. When the RX1 data-rate
|
||||
# is smaller than the configured value, then the Network Server will
|
||||
# first try to schedule the downlink for RX2, failing that (e.g. the gateway
|
||||
# has already a payload scheduled at the RX2 timing) it will try RX1.
|
||||
rx2_prefer_on_rx1_dr_lt=0
|
||||
|
||||
# Prefer RX2 on link budget.
|
||||
#
|
||||
# When the link-budget is better for RX2 than for RX1, the Network Server will first
|
||||
# try to schedule the downlink in RX2, failing that it will try RX1.
|
||||
rx2_prefer_on_link_budget=false
|
||||
|
||||
# Downlink TX Power (dBm)
|
||||
#
|
||||
# When set to -1, the downlink TX Power from the configured band will
|
||||
# be used.
|
||||
#
|
||||
# Please consult the LoRaWAN Regional Parameters and local regulations
|
||||
# for valid and legal options. Note that the configured TX Power must be
|
||||
# supported by your gateway(s).
|
||||
downlink_tx_power=-1
|
||||
|
||||
# ADR is disabled.
|
||||
adr_disabled=false
|
||||
|
||||
# Minimum data-rate.
|
||||
min_dr=0
|
||||
|
||||
# Maximum data-rate.
|
||||
max_dr=5
|
||||
|
||||
# Enabled uplink channels.
|
||||
#
|
||||
# Use this when ony a sub-set of the by default enabled channels are being
|
||||
# used. For example when only using the first 8 channels of the US band.
|
||||
# Note: when left blank / empty array, all channels will be enabled.
|
||||
enabled_uplink_channels=[56, 57, 58, 59, 60, 61, 62, 63]
|
||||
|
||||
|
||||
# Rejoin-request configuration (LoRaWAN 1.1)
|
||||
[regions.network.rejoin_request]
|
||||
|
||||
# Request devices to periodically send rejoin-requests.
|
||||
enabled=false
|
||||
|
||||
# The device must send a rejoin-request type 0 at least every 2^(max_count_n + 4)
|
||||
# uplink messages. Valid values are 0 to 15.
|
||||
max_count_n=0
|
||||
|
||||
# The device must send a rejoin-request type 0 at least every 2^(max_time_n + 10)
|
||||
# seconds. Valid values are 0 to 15.
|
||||
#
|
||||
# 0 = roughly 17 minutes
|
||||
# 15 = about 1 year
|
||||
max_time_n=0
|
||||
|
||||
|
||||
# Class-B configuration.
|
||||
[regions.network.class_b]
|
||||
|
||||
# Ping-slot data-rate.
|
||||
ping_slot_dr=2
|
||||
|
||||
# Ping-slot frequency (Hz)
|
||||
#
|
||||
# set this to 0 to use the default frequency plan for the configured region
|
||||
# (which could be frequency hopping).
|
||||
ping_slot_frequency=0
|
||||
@ -1,247 +0,0 @@
|
||||
# This file contains an example CN470 example (channels 64-71).
|
||||
[[regions]]
|
||||
|
||||
# ID is an use-defined identifier for this region.
|
||||
id="cn470_8"
|
||||
|
||||
# Description is a short description for this region.
|
||||
description="CN470 (channels 64-71)"
|
||||
|
||||
# Common-name refers to the common-name of this region as defined by
|
||||
# the LoRa Alliance.
|
||||
common_name="CN470"
|
||||
|
||||
|
||||
# Gateway configuration.
|
||||
[regions.gateway]
|
||||
|
||||
# Force gateways as private.
|
||||
#
|
||||
# If enabled, gateways can only be used by devices under the same tenant.
|
||||
force_gws_private=false
|
||||
|
||||
|
||||
# Gateway backend configuration.
|
||||
[regions.gateway.backend]
|
||||
|
||||
# The enabled backend type.
|
||||
enabled="mqtt"
|
||||
|
||||
# MQTT configuration.
|
||||
[regions.gateway.backend.mqtt]
|
||||
|
||||
# Topic prefix.
|
||||
#
|
||||
# The topic prefix can be used to define the region of the gateway.
|
||||
# Note, there is no need to add a trailing '/' to the prefix. The trailing
|
||||
# '/' is automatically added to the prefix if it is configured.
|
||||
topic_prefix="cn470_8"
|
||||
|
||||
# MQTT server (e.g. scheme://host:port where scheme is tcp, ssl or ws)
|
||||
server="tcp://$MQTT_BROKER_HOST:1883"
|
||||
|
||||
# Connect with the given username (optional)
|
||||
username=""
|
||||
|
||||
# Connect with the given password (optional)
|
||||
password=""
|
||||
|
||||
# Quality of service level
|
||||
#
|
||||
# 0: at most once
|
||||
# 1: at least once
|
||||
# 2: exactly once
|
||||
#
|
||||
# Note: an increase of this value will decrease the performance.
|
||||
# For more information: https://www.hivemq.com/blog/mqtt-essentials-part-6-mqtt-quality-of-service-levels
|
||||
qos=0
|
||||
|
||||
# Clean session
|
||||
#
|
||||
# Set the "clean session" flag in the connect message when this client
|
||||
# connects to an MQTT broker. By setting this flag you are indicating
|
||||
# that no messages saved by the broker for this client should be delivered.
|
||||
clean_session=false
|
||||
|
||||
# Client ID
|
||||
#
|
||||
# Set the client id to be used by this client when connecting to the MQTT
|
||||
# broker. A client id must be no longer than 23 characters. If left blank,
|
||||
# a random id will be generated by ChirpStack.
|
||||
client_id=""
|
||||
|
||||
# Keep alive interval.
|
||||
#
|
||||
# This defines the maximum time that that should pass without communication
|
||||
# between the client and server.
|
||||
keep_alive_interval="30s"
|
||||
|
||||
# CA certificate file (optional)
|
||||
#
|
||||
# Use this when setting up a secure connection (when server uses ssl://...)
|
||||
# but the certificate used by the server is not trusted by any CA certificate
|
||||
# on the server (e.g. when self generated).
|
||||
ca_cert=""
|
||||
|
||||
# TLS certificate file (optional)
|
||||
tls_cert=""
|
||||
|
||||
# TLS key file (optional)
|
||||
tls_key=""
|
||||
|
||||
|
||||
# Gateway channel configuration.
|
||||
#
|
||||
# Note: this configuration is only used in case the gateway is using the
|
||||
# ChirpStack Concentratord daemon. In any other case, this configuration
|
||||
# is ignored.
|
||||
[[regions.gateway.channels]]
|
||||
frequency=483100000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=483300000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=483500000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=483700000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=483900000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=484100000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=484300000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=484500000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
|
||||
# Region specific network configuration.
|
||||
[regions.network]
|
||||
|
||||
# Installation margin (dB) used by the ADR engine.
|
||||
#
|
||||
# A higher number means that the network-server will keep more margin,
|
||||
# resulting in a lower data-rate but decreasing the chance that the
|
||||
# device gets disconnected because it is unable to reach one of the
|
||||
# surrounded gateways.
|
||||
installation_margin=10
|
||||
|
||||
# RX window (Class-A).
|
||||
#
|
||||
# Set this to:
|
||||
# 0: RX1 / RX2
|
||||
# 1: RX1 only
|
||||
# 2: RX2 only
|
||||
rx_window=0
|
||||
|
||||
# RX1 delay (1 - 15 seconds).
|
||||
rx1_delay=1
|
||||
|
||||
# RX1 data-rate offset
|
||||
rx1_dr_offset=0
|
||||
|
||||
# RX2 data-rate
|
||||
rx2_dr=0
|
||||
|
||||
# RX2 frequency (Hz)
|
||||
rx2_frequency=505300000
|
||||
|
||||
# Prefer RX2 on RX1 data-rate less than.
|
||||
#
|
||||
# Prefer RX2 over RX1 based on the RX1 data-rate. When the RX1 data-rate
|
||||
# is smaller than the configured value, then the Network Server will
|
||||
# first try to schedule the downlink for RX2, failing that (e.g. the gateway
|
||||
# has already a payload scheduled at the RX2 timing) it will try RX1.
|
||||
rx2_prefer_on_rx1_dr_lt=0
|
||||
|
||||
# Prefer RX2 on link budget.
|
||||
#
|
||||
# When the link-budget is better for RX2 than for RX1, the Network Server will first
|
||||
# try to schedule the downlink in RX2, failing that it will try RX1.
|
||||
rx2_prefer_on_link_budget=false
|
||||
|
||||
# Downlink TX Power (dBm)
|
||||
#
|
||||
# When set to -1, the downlink TX Power from the configured band will
|
||||
# be used.
|
||||
#
|
||||
# Please consult the LoRaWAN Regional Parameters and local regulations
|
||||
# for valid and legal options. Note that the configured TX Power must be
|
||||
# supported by your gateway(s).
|
||||
downlink_tx_power=-1
|
||||
|
||||
# ADR is disabled.
|
||||
adr_disabled=false
|
||||
|
||||
# Minimum data-rate.
|
||||
min_dr=0
|
||||
|
||||
# Maximum data-rate.
|
||||
max_dr=5
|
||||
|
||||
# Enabled uplink channels.
|
||||
#
|
||||
# Use this when ony a sub-set of the by default enabled channels are being
|
||||
# used. For example when only using the first 8 channels of the US band.
|
||||
# Note: when left blank / empty array, all channels will be enabled.
|
||||
enabled_uplink_channels=[64, 65, 66, 67, 68, 69, 70, 71]
|
||||
|
||||
|
||||
# Rejoin-request configuration (LoRaWAN 1.1)
|
||||
[regions.network.rejoin_request]
|
||||
|
||||
# Request devices to periodically send rejoin-requests.
|
||||
enabled=false
|
||||
|
||||
# The device must send a rejoin-request type 0 at least every 2^(max_count_n + 4)
|
||||
# uplink messages. Valid values are 0 to 15.
|
||||
max_count_n=0
|
||||
|
||||
# The device must send a rejoin-request type 0 at least every 2^(max_time_n + 10)
|
||||
# seconds. Valid values are 0 to 15.
|
||||
#
|
||||
# 0 = roughly 17 minutes
|
||||
# 15 = about 1 year
|
||||
max_time_n=0
|
||||
|
||||
|
||||
# Class-B configuration.
|
||||
[regions.network.class_b]
|
||||
|
||||
# Ping-slot data-rate.
|
||||
ping_slot_dr=2
|
||||
|
||||
# Ping-slot frequency (Hz)
|
||||
#
|
||||
# set this to 0 to use the default frequency plan for the configured region
|
||||
# (which could be frequency hopping).
|
||||
ping_slot_frequency=0
|
||||
@ -1,247 +0,0 @@
|
||||
# This file contains an example CN470 example (channels 72-79).
|
||||
[[regions]]
|
||||
|
||||
# ID is an use-defined identifier for this region.
|
||||
id="cn470_9"
|
||||
|
||||
# Description is a short description for this region.
|
||||
description="CN470 (channels 72-79)"
|
||||
|
||||
# Common-name refers to the common-name of this region as defined by
|
||||
# the LoRa Alliance.
|
||||
common_name="CN470"
|
||||
|
||||
|
||||
# Gateway configuration.
|
||||
[regions.gateway]
|
||||
|
||||
# Force gateways as private.
|
||||
#
|
||||
# If enabled, gateways can only be used by devices under the same tenant.
|
||||
force_gws_private=false
|
||||
|
||||
|
||||
# Gateway backend configuration.
|
||||
[regions.gateway.backend]
|
||||
|
||||
# The enabled backend type.
|
||||
enabled="mqtt"
|
||||
|
||||
# MQTT configuration.
|
||||
[regions.gateway.backend.mqtt]
|
||||
|
||||
# Topic prefix.
|
||||
#
|
||||
# The topic prefix can be used to define the region of the gateway.
|
||||
# Note, there is no need to add a trailing '/' to the prefix. The trailing
|
||||
# '/' is automatically added to the prefix if it is configured.
|
||||
topic_prefix="cn470_9"
|
||||
|
||||
# MQTT server (e.g. scheme://host:port where scheme is tcp, ssl or ws)
|
||||
server="tcp://$MQTT_BROKER_HOST:1883"
|
||||
|
||||
# Connect with the given username (optional)
|
||||
username=""
|
||||
|
||||
# Connect with the given password (optional)
|
||||
password=""
|
||||
|
||||
# Quality of service level
|
||||
#
|
||||
# 0: at most once
|
||||
# 1: at least once
|
||||
# 2: exactly once
|
||||
#
|
||||
# Note: an increase of this value will decrease the performance.
|
||||
# For more information: https://www.hivemq.com/blog/mqtt-essentials-part-6-mqtt-quality-of-service-levels
|
||||
qos=0
|
||||
|
||||
# Clean session
|
||||
#
|
||||
# Set the "clean session" flag in the connect message when this client
|
||||
# connects to an MQTT broker. By setting this flag you are indicating
|
||||
# that no messages saved by the broker for this client should be delivered.
|
||||
clean_session=false
|
||||
|
||||
# Client ID
|
||||
#
|
||||
# Set the client id to be used by this client when connecting to the MQTT
|
||||
# broker. A client id must be no longer than 23 characters. If left blank,
|
||||
# a random id will be generated by ChirpStack.
|
||||
client_id=""
|
||||
|
||||
# Keep alive interval.
|
||||
#
|
||||
# This defines the maximum time that that should pass without communication
|
||||
# between the client and server.
|
||||
keep_alive_interval="30s"
|
||||
|
||||
# CA certificate file (optional)
|
||||
#
|
||||
# Use this when setting up a secure connection (when server uses ssl://...)
|
||||
# but the certificate used by the server is not trusted by any CA certificate
|
||||
# on the server (e.g. when self generated).
|
||||
ca_cert=""
|
||||
|
||||
# TLS certificate file (optional)
|
||||
tls_cert=""
|
||||
|
||||
# TLS key file (optional)
|
||||
tls_key=""
|
||||
|
||||
|
||||
# Gateway channel configuration.
|
||||
#
|
||||
# Note: this configuration is only used in case the gateway is using the
|
||||
# ChirpStack Concentratord daemon. In any other case, this configuration
|
||||
# is ignored.
|
||||
[[regions.gateway.channels]]
|
||||
frequency=484700000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=484900000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=485100000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=485300000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=485500000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=485700000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=485900000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
[[regions.gateway.channels]]
|
||||
frequency=486100000
|
||||
bandwidth=125000
|
||||
modulation="LORA"
|
||||
spreading_factors=[7, 8, 9, 10, 11, 12]
|
||||
|
||||
|
||||
# Region specific network configuration.
|
||||
[regions.network]
|
||||
|
||||
# Installation margin (dB) used by the ADR engine.
|
||||
#
|
||||
# A higher number means that the network-server will keep more margin,
|
||||
# resulting in a lower data-rate but decreasing the chance that the
|
||||
# device gets disconnected because it is unable to reach one of the
|
||||
# surrounded gateways.
|
||||
installation_margin=10
|
||||
|
||||
# RX window (Class-A).
|
||||
#
|
||||
# Set this to:
|
||||
# 0: RX1 / RX2
|
||||
# 1: RX1 only
|
||||
# 2: RX2 only
|
||||
rx_window=0
|
||||
|
||||
# RX1 delay (1 - 15 seconds).
|
||||
rx1_delay=1
|
||||
|
||||
# RX1 data-rate offset
|
||||
rx1_dr_offset=0
|
||||
|
||||
# RX2 data-rate
|
||||
rx2_dr=0
|
||||
|
||||
# RX2 frequency (Hz)
|
||||
rx2_frequency=505300000
|
||||
|
||||
# Prefer RX2 on RX1 data-rate less than.
|
||||
#
|
||||
# Prefer RX2 over RX1 based on the RX1 data-rate. When the RX1 data-rate
|
||||
# is smaller than the configured value, then the Network Server will
|
||||
# first try to schedule the downlink for RX2, failing that (e.g. the gateway
|
||||
# has already a payload scheduled at the RX2 timing) it will try RX1.
|
||||
rx2_prefer_on_rx1_dr_lt=0
|
||||
|
||||
# Prefer RX2 on link budget.
|
||||
#
|
||||
# When the link-budget is better for RX2 than for RX1, the Network Server will first
|
||||
# try to schedule the downlink in RX2, failing that it will try RX1.
|
||||
rx2_prefer_on_link_budget=false
|
||||
|
||||
# Downlink TX Power (dBm)
|
||||
#
|
||||
# When set to -1, the downlink TX Power from the configured band will
|
||||
# be used.
|
||||
#
|
||||
# Please consult the LoRaWAN Regional Parameters and local regulations
|
||||
# for valid and legal options. Note that the configured TX Power must be
|
||||
# supported by your gateway(s).
|
||||
downlink_tx_power=-1
|
||||
|
||||
# ADR is disabled.
|
||||
adr_disabled=false
|
||||
|
||||
# Minimum data-rate.
|
||||
min_dr=0
|
||||
|
||||
# Maximum data-rate.
|
||||
max_dr=5
|
||||
|
||||
# Enabled uplink channels.
|
||||
#
|
||||
# Use this when ony a sub-set of the by default enabled channels are being
|
||||
# used. For example when only using the first 8 channels of the US band.
|
||||
# Note: when left blank / empty array, all channels will be enabled.
|
||||
enabled_uplink_channels=[72, 73, 74, 75, 76, 77, 78, 79]
|
||||
|
||||
|
||||
# Rejoin-request configuration (LoRaWAN 1.1)
|
||||
[regions.network.rejoin_request]
|
||||
|
||||
# Request devices to periodically send rejoin-requests.
|
||||
enabled=false
|
||||
|
||||
# The device must send a rejoin-request type 0 at least every 2^(max_count_n + 4)
|
||||
# uplink messages. Valid values are 0 to 15.
|
||||
max_count_n=0
|
||||
|
||||
# The device must send a rejoin-request type 0 at least every 2^(max_time_n + 10)
|
||||
# seconds. Valid values are 0 to 15.
|
||||
#
|
||||
# 0 = roughly 17 minutes
|
||||
# 15 = about 1 year
|
||||
max_time_n=0
|
||||
|
||||
|
||||
# Class-B configuration.
|
||||
[regions.network.class_b]
|
||||
|
||||
# Ping-slot data-rate.
|
||||
ping_slot_dr=2
|
||||
|
||||
# Ping-slot frequency (Hz)
|
||||
#
|
||||
# set this to 0 to use the default frequency plan for the configured region
|
||||
# (which could be frequency hopping).
|
||||
ping_slot_frequency=0
|
||||
@ -1,11 +1,8 @@
|
||||
# This file contains an example RU864 configuration.
|
||||
[[regions]]
|
||||
|
||||
# ID is an user-defined identifier for this region.
|
||||
id="ru864"
|
||||
|
||||
# Description is a short description for this region.
|
||||
description="RU864"
|
||||
# Name is an user-defined identifier for this region.
|
||||
name="ru864"
|
||||
|
||||
# Common-name refers to the common-name of this region as defined by
|
||||
# the LoRa Alliance.
|
||||
@ -30,15 +27,14 @@
|
||||
# MQTT configuration.
|
||||
[regions.gateway.backend.mqtt]
|
||||
|
||||
# Topic prefix.
|
||||
#
|
||||
# The topic prefix can be used to define the region of the gateway.
|
||||
# Note, there is no need to add a trailing '/' to the prefix. The trailing
|
||||
# '/' is automatically added to the prefix if it is configured.
|
||||
topic_prefix="ru864"
|
||||
# Event topic template.
|
||||
event_topic="ru864/gateway/+/event/+"
|
||||
|
||||
# Command topic template.
|
||||
command_topic="ru864/gateway/{{ gateway_id }}/command/{{ command }}"
|
||||
|
||||
# MQTT server (e.g. scheme://host:port where scheme is tcp, ssl or ws)
|
||||
server="tcp://$MQTT_BROKER_HOST:1883"
|
||||
server="tcp://mosquitto:1883"
|
||||
|
||||
# Connect with the given username (optional)
|
||||
username=""
|
||||
@ -61,21 +57,15 @@
|
||||
# Set the "clean session" flag in the connect message when this client
|
||||
# connects to an MQTT broker. By setting this flag you are indicating
|
||||
# that no messages saved by the broker for this client should be delivered.
|
||||
clean_session=false
|
||||
clean_session=true
|
||||
|
||||
# Client ID
|
||||
#
|
||||
# Set the client id to be used by this client when connecting to the MQTT
|
||||
# broker. A client id must be no longer than 23 characters. If left blank,
|
||||
# a random id will be generated by ChirpStack.
|
||||
# broker. A client id must be no longer than 23 characters. When left blank,
|
||||
# a random id will be generated. This requires clean_session=true.
|
||||
client_id=""
|
||||
|
||||
# Keep alive interval.
|
||||
#
|
||||
# This defines the maximum time that that should pass without communication
|
||||
# between the client and server.
|
||||
keep_alive_interval="30s"
|
||||
|
||||
# CA certificate file (optional)
|
||||
#
|
||||
# Use this when setting up a secure connection (when server uses ssl://...)
|
||||
@ -195,7 +185,7 @@
|
||||
[regions.network.class_b]
|
||||
|
||||
# Ping-slot data-rate.
|
||||
ping_slot_dr=3
|
||||
ping_slot_dr=0
|
||||
|
||||
# Ping-slot frequency (Hz)
|
||||
#
|
||||
@ -1,11 +1,8 @@
|
||||
# This file contains an example US915 example (channels 0-7 + 64).
|
||||
[[regions]]
|
||||
|
||||
# ID is an use-defined identifier for this region.
|
||||
id="us915_0"
|
||||
|
||||
# Description is a short description for this region.
|
||||
description="US915 (channels 0-7 + 64)"
|
||||
# Name is an use-defined identifier for this region.
|
||||
name="us915_0"
|
||||
|
||||
# Common-name refers to the common-name of this region as defined by
|
||||
# the LoRa Alliance.
|
||||
@ -30,15 +27,14 @@
|
||||
# MQTT configuration.
|
||||
[regions.gateway.backend.mqtt]
|
||||
|
||||
# Topic prefix.
|
||||
#
|
||||
# The topic prefix can be used to define the region of the gateway.
|
||||
# Note, there is no need to add a trailing '/' to the prefix. The trailing
|
||||
# '/' is automatically added to the prefix if it is configured.
|
||||
topic_prefix="us915_0"
|
||||
# Event topic template.
|
||||
event_topic="us915_0/gateway/+/event/+"
|
||||
|
||||
# Command topic template.
|
||||
command_topic="us915_0/gateway/{{ gateway_id }}/command/{{ command }}"
|
||||
|
||||
# MQTT server (e.g. scheme://host:port where scheme is tcp, ssl or ws)
|
||||
server="tcp://$MQTT_BROKER_HOST:1883"
|
||||
server="tcp://mosquitto:1883"
|
||||
|
||||
# Connect with the given username (optional)
|
||||
username=""
|
||||
@ -61,21 +57,15 @@
|
||||
# Set the "clean session" flag in the connect message when this client
|
||||
# connects to an MQTT broker. By setting this flag you are indicating
|
||||
# that no messages saved by the broker for this client should be delivered.
|
||||
clean_session=false
|
||||
clean_session=true
|
||||
|
||||
# Client ID
|
||||
#
|
||||
# Set the client id to be used by this client when connecting to the MQTT
|
||||
# broker. A client id must be no longer than 23 characters. If left blank,
|
||||
# a random id will be generated by ChirpStack.
|
||||
# broker. A client id must be no longer than 23 characters. When left blank,
|
||||
# a random id will be generated. This requires clean_session=true.
|
||||
client_id=""
|
||||
|
||||
# Keep alive interval.
|
||||
#
|
||||
# This defines the maximum time that that should pass without communication
|
||||
# between the client and server.
|
||||
keep_alive_interval="30s"
|
||||
|
||||
# CA certificate file (optional)
|
||||
#
|
||||
# Use this when setting up a secure connection (when server uses ssl://...)
|
||||
@ -1,11 +1,8 @@
|
||||
# This file contains an example US915 example (channels 8-15 + 65).
|
||||
[[regions]]
|
||||
|
||||
# ID is an use-defined identifier for this region.
|
||||
id="us915_1"
|
||||
|
||||
# Description is a short description for this region.
|
||||
description="US915 (channels 8-15 + 65)"
|
||||
# Name is an use-defined identifier for this region.
|
||||
name="us915_1"
|
||||
|
||||
# Common-name refers to the common-name of this region as defined by
|
||||
# the LoRa Alliance.
|
||||
@ -30,15 +27,14 @@
|
||||
# MQTT configuration.
|
||||
[regions.gateway.backend.mqtt]
|
||||
|
||||
# Topic prefix.
|
||||
#
|
||||
# The topic prefix can be used to define the region of the gateway.
|
||||
# Note, there is no need to add a trailing '/' to the prefix. The trailing
|
||||
# '/' is automatically added to the prefix if it is configured.
|
||||
topic_prefix="us915_1"
|
||||
# Event topic template.
|
||||
event_topic="us915_1/gateway/+/event/+"
|
||||
|
||||
# Command topic template.
|
||||
command_topic="us915_1/gateway/{{ gateway_id }}/command/{{ command }}"
|
||||
|
||||
# MQTT server (e.g. scheme://host:port where scheme is tcp, ssl or ws)
|
||||
server="tcp://$MQTT_BROKER_HOST:1883"
|
||||
server="tcp://mosquitto:1883"
|
||||
|
||||
# Connect with the given username (optional)
|
||||
username=""
|
||||
@ -61,21 +57,15 @@
|
||||
# Set the "clean session" flag in the connect message when this client
|
||||
# connects to an MQTT broker. By setting this flag you are indicating
|
||||
# that no messages saved by the broker for this client should be delivered.
|
||||
clean_session=false
|
||||
clean_session=true
|
||||
|
||||
# Client ID
|
||||
#
|
||||
# Set the client id to be used by this client when connecting to the MQTT
|
||||
# broker. A client id must be no longer than 23 characters. If left blank,
|
||||
# a random id will be generated by ChirpStack.
|
||||
# broker. A client id must be no longer than 23 characters. When left blank,
|
||||
# a random id will be generated. This requires clean_session=true.
|
||||
client_id=""
|
||||
|
||||
# Keep alive interval.
|
||||
#
|
||||
# This defines the maximum time that that should pass without communication
|
||||
# between the client and server.
|
||||
keep_alive_interval="30s"
|
||||
|
||||
# CA certificate file (optional)
|
||||
#
|
||||
# Use this when setting up a secure connection (when server uses ssl://...)
|
||||
@ -1,11 +1,8 @@
|
||||
# This file contains an example US915 example (channels 16-23 + 66).
|
||||
[[regions]]
|
||||
|
||||
# ID is an use-defined identifier for this region.
|
||||
id="us915_2"
|
||||
|
||||
# Description is a short description for this region.
|
||||
description="US915 (channels 16-23 + 66)"
|
||||
# Name is an use-defined identifier for this region.
|
||||
name="us915_2"
|
||||
|
||||
# Common-name refers to the common-name of this region as defined by
|
||||
# the LoRa Alliance.
|
||||
@ -30,15 +27,14 @@
|
||||
# MQTT configuration.
|
||||
[regions.gateway.backend.mqtt]
|
||||
|
||||
# Topic prefix.
|
||||
#
|
||||
# The topic prefix can be used to define the region of the gateway.
|
||||
# Note, there is no need to add a trailing '/' to the prefix. The trailing
|
||||
# '/' is automatically added to the prefix if it is configured.
|
||||
topic_prefix="us915_2"
|
||||
# Event topic template.
|
||||
event_topic="us915_2/gateway/+/event/+"
|
||||
|
||||
# Command topic template.
|
||||
command_topic="us915_2/gateway/{{ gateway_id }}/command/{{ command }}"
|
||||
|
||||
# MQTT server (e.g. scheme://host:port where scheme is tcp, ssl or ws)
|
||||
server="tcp://$MQTT_BROKER_HOST:1883"
|
||||
server="tcp://mosquitto:1883"
|
||||
|
||||
# Connect with the given username (optional)
|
||||
username=""
|
||||
@ -61,21 +57,15 @@
|
||||
# Set the "clean session" flag in the connect message when this client
|
||||
# connects to an MQTT broker. By setting this flag you are indicating
|
||||
# that no messages saved by the broker for this client should be delivered.
|
||||
clean_session=false
|
||||
clean_session=true
|
||||
|
||||
# Client ID
|
||||
#
|
||||
# Set the client id to be used by this client when connecting to the MQTT
|
||||
# broker. A client id must be no longer than 23 characters. If left blank,
|
||||
# a random id will be generated by ChirpStack.
|
||||
# broker. A client id must be no longer than 23 characters. When left blank,
|
||||
# a random id will be generated. This requires clean_session=true.
|
||||
client_id=""
|
||||
|
||||
# Keep alive interval.
|
||||
#
|
||||
# This defines the maximum time that that should pass without communication
|
||||
# between the client and server.
|
||||
keep_alive_interval="30s"
|
||||
|
||||
# CA certificate file (optional)
|
||||
#
|
||||
# Use this when setting up a secure connection (when server uses ssl://...)
|
||||
@ -1,11 +1,8 @@
|
||||
# This file contains an example US915 example (channels 24-31 + 67).
|
||||
[[regions]]
|
||||
|
||||
# ID is an use-defined identifier for this region.
|
||||
id="us915_3"
|
||||
|
||||
# Description is a short description for this region.
|
||||
description="US915 (channels 24-31 + 67)"
|
||||
# Name is an use-defined identifier for this region.
|
||||
name="us915_3"
|
||||
|
||||
# Common-name refers to the common-name of this region as defined by
|
||||
# the LoRa Alliance.
|
||||
@ -30,15 +27,14 @@
|
||||
# MQTT configuration.
|
||||
[regions.gateway.backend.mqtt]
|
||||
|
||||
# Topic prefix.
|
||||
#
|
||||
# The topic prefix can be used to define the region of the gateway.
|
||||
# Note, there is no need to add a trailing '/' to the prefix. The trailing
|
||||
# '/' is automatically added to the prefix if it is configured.
|
||||
topic_prefix="us915_3"
|
||||
# Event topic template.
|
||||
event_topic="us915_3/gateway/+/event/+"
|
||||
|
||||
# Command topic template.
|
||||
command_topic="us915_3/gateway/{{ gateway_id }}/command/{{ command }}"
|
||||
|
||||
# MQTT server (e.g. scheme://host:port where scheme is tcp, ssl or ws)
|
||||
server="tcp://$MQTT_BROKER_HOST:1883"
|
||||
server="tcp://mosquitto:1883"
|
||||
|
||||
# Connect with the given username (optional)
|
||||
username=""
|
||||
@ -61,21 +57,15 @@
|
||||
# Set the "clean session" flag in the connect message when this client
|
||||
# connects to an MQTT broker. By setting this flag you are indicating
|
||||
# that no messages saved by the broker for this client should be delivered.
|
||||
clean_session=false
|
||||
clean_session=true
|
||||
|
||||
# Client ID
|
||||
#
|
||||
# Set the client id to be used by this client when connecting to the MQTT
|
||||
# broker. A client id must be no longer than 23 characters. If left blank,
|
||||
# a random id will be generated by ChirpStack.
|
||||
# broker. A client id must be no longer than 23 characters. When left blank,
|
||||
# a random id will be generated. This requires clean_session=true.
|
||||
client_id=""
|
||||
|
||||
# Keep alive interval.
|
||||
#
|
||||
# This defines the maximum time that that should pass without communication
|
||||
# between the client and server.
|
||||
keep_alive_interval="30s"
|
||||
|
||||
# CA certificate file (optional)
|
||||
#
|
||||
# Use this when setting up a secure connection (when server uses ssl://...)
|
||||
@ -1,11 +1,8 @@
|
||||
# This file contains an example US915 example (channels 32-39 + 68).
|
||||
[[regions]]
|
||||
|
||||
# ID is an use-defined identifier for this region.
|
||||
id="us915_4"
|
||||
|
||||
# Description is a short description for this region.
|
||||
description="US915 (channels 32-39 + 68)"
|
||||
# Name is an use-defined identifier for this region.
|
||||
name="us915_4"
|
||||
|
||||
# Common-name refers to the common-name of this region as defined by
|
||||
# the LoRa Alliance.
|
||||
@ -30,15 +27,14 @@
|
||||
# MQTT configuration.
|
||||
[regions.gateway.backend.mqtt]
|
||||
|
||||
# Topic prefix.
|
||||
#
|
||||
# The topic prefix can be used to define the region of the gateway.
|
||||
# Note, there is no need to add a trailing '/' to the prefix. The trailing
|
||||
# '/' is automatically added to the prefix if it is configured.
|
||||
topic_prefix="us915_4"
|
||||
# Event topic template.
|
||||
event_topic="us915_4/gateway/+/event/+"
|
||||
|
||||
# Command topic template.
|
||||
command_topic="us915_4/gateway/{{ gateway_id }}/command/{{ command }}"
|
||||
|
||||
# MQTT server (e.g. scheme://host:port where scheme is tcp, ssl or ws)
|
||||
server="tcp://$MQTT_BROKER_HOST:1883"
|
||||
server="tcp://mosquitto:1883"
|
||||
|
||||
# Connect with the given username (optional)
|
||||
username=""
|
||||
@ -61,21 +57,15 @@
|
||||
# Set the "clean session" flag in the connect message when this client
|
||||
# connects to an MQTT broker. By setting this flag you are indicating
|
||||
# that no messages saved by the broker for this client should be delivered.
|
||||
clean_session=false
|
||||
clean_session=true
|
||||
|
||||
# Client ID
|
||||
#
|
||||
# Set the client id to be used by this client when connecting to the MQTT
|
||||
# broker. A client id must be no longer than 23 characters. If left blank,
|
||||
# a random id will be generated by ChirpStack.
|
||||
# broker. A client id must be no longer than 23 characters. When left blank,
|
||||
# a random id will be generated. This requires clean_session=true.
|
||||
client_id=""
|
||||
|
||||
# Keep alive interval.
|
||||
#
|
||||
# This defines the maximum time that that should pass without communication
|
||||
# between the client and server.
|
||||
keep_alive_interval="30s"
|
||||
|
||||
# CA certificate file (optional)
|
||||
#
|
||||
# Use this when setting up a secure connection (when server uses ssl://...)
|
||||
@ -1,11 +1,8 @@
|
||||
# This file contains an example US915 example (channels 40-47 + 69).
|
||||
[[regions]]
|
||||
|
||||
# ID is an use-defined identifier for this region.
|
||||
id="us915_5"
|
||||
|
||||
# Description is a short description for this region.
|
||||
description="US915 (channels 40-47 + 69)"
|
||||
# Name is an use-defined identifier for this region.
|
||||
name="us915_5"
|
||||
|
||||
# Common-name refers to the common-name of this region as defined by
|
||||
# the LoRa Alliance.
|
||||
@ -30,15 +27,14 @@
|
||||
# MQTT configuration.
|
||||
[regions.gateway.backend.mqtt]
|
||||
|
||||
# Topic prefix.
|
||||
#
|
||||
# The topic prefix can be used to define the region of the gateway.
|
||||
# Note, there is no need to add a trailing '/' to the prefix. The trailing
|
||||
# '/' is automatically added to the prefix if it is configured.
|
||||
topic_prefix="us915_5"
|
||||
# Event topic template.
|
||||
event_topic="us915_5/gateway/+/event/+"
|
||||
|
||||
# Command topic template.
|
||||
command_topic="us915_5/gateway/{{ gateway_id }}/command/{{ command }}"
|
||||
|
||||
# MQTT server (e.g. scheme://host:port where scheme is tcp, ssl or ws)
|
||||
server="tcp://$MQTT_BROKER_HOST:1883"
|
||||
server="tcp://mosquitto:1883"
|
||||
|
||||
# Connect with the given username (optional)
|
||||
username=""
|
||||
@ -61,21 +57,15 @@
|
||||
# Set the "clean session" flag in the connect message when this client
|
||||
# connects to an MQTT broker. By setting this flag you are indicating
|
||||
# that no messages saved by the broker for this client should be delivered.
|
||||
clean_session=false
|
||||
clean_session=true
|
||||
|
||||
# Client ID
|
||||
#
|
||||
# Set the client id to be used by this client when connecting to the MQTT
|
||||
# broker. A client id must be no longer than 23 characters. If left blank,
|
||||
# a random id will be generated by ChirpStack.
|
||||
# broker. A client id must be no longer than 23 characters. When left blank,
|
||||
# a random id will be generated. This requires clean_session=true.
|
||||
client_id=""
|
||||
|
||||
# Keep alive interval.
|
||||
#
|
||||
# This defines the maximum time that that should pass without communication
|
||||
# between the client and server.
|
||||
keep_alive_interval="30s"
|
||||
|
||||
# CA certificate file (optional)
|
||||
#
|
||||
# Use this when setting up a secure connection (when server uses ssl://...)
|
||||
@ -1,11 +1,8 @@
|
||||
# This file contains an example US915 example (channels 48-55 + 70).
|
||||
[[regions]]
|
||||
|
||||
# ID is an use-defined identifier for this region.
|
||||
id="us915_6"
|
||||
|
||||
# Description is a short description for this region.
|
||||
description="US915 (channels 48-55 + 70)"
|
||||
# Name is an use-defined identifier for this region.
|
||||
name="us915_6"
|
||||
|
||||
# Common-name refers to the common-name of this region as defined by
|
||||
# the LoRa Alliance.
|
||||
@ -30,15 +27,14 @@
|
||||
# MQTT configuration.
|
||||
[regions.gateway.backend.mqtt]
|
||||
|
||||
# Topic prefix.
|
||||
#
|
||||
# The topic prefix can be used to define the region of the gateway.
|
||||
# Note, there is no need to add a trailing '/' to the prefix. The trailing
|
||||
# '/' is automatically added to the prefix if it is configured.
|
||||
topic_prefix="us915_6"
|
||||
# Event topic template.
|
||||
event_topic="us915_6/gateway/+/event/+"
|
||||
|
||||
# Command topic template.
|
||||
command_topic="us915_6/gateway/{{ gateway_id }}/command/{{ command }}"
|
||||
|
||||
# MQTT server (e.g. scheme://host:port where scheme is tcp, ssl or ws)
|
||||
server="tcp://$MQTT_BROKER_HOST:1883"
|
||||
server="tcp://mosquitto:1883"
|
||||
|
||||
# Connect with the given username (optional)
|
||||
username=""
|
||||
@ -61,21 +57,15 @@
|
||||
# Set the "clean session" flag in the connect message when this client
|
||||
# connects to an MQTT broker. By setting this flag you are indicating
|
||||
# that no messages saved by the broker for this client should be delivered.
|
||||
clean_session=false
|
||||
clean_session=true
|
||||
|
||||
# Client ID
|
||||
#
|
||||
# Set the client id to be used by this client when connecting to the MQTT
|
||||
# broker. A client id must be no longer than 23 characters. If left blank,
|
||||
# a random id will be generated by ChirpStack.
|
||||
# broker. A client id must be no longer than 23 characters. When left blank,
|
||||
# a random id will be generated. This requires clean_session=true.
|
||||
client_id=""
|
||||
|
||||
# Keep alive interval.
|
||||
#
|
||||
# This defines the maximum time that that should pass without communication
|
||||
# between the client and server.
|
||||
keep_alive_interval="30s"
|
||||
|
||||
# CA certificate file (optional)
|
||||
#
|
||||
# Use this when setting up a secure connection (when server uses ssl://...)
|
||||
@ -1,11 +1,8 @@
|
||||
# This file contains an example US915 example (channels 56-63 + 71).
|
||||
[[regions]]
|
||||
|
||||
# ID is an use-defined identifier for this region.
|
||||
id="us915_7"
|
||||
|
||||
# Description is a short description for this region.
|
||||
description="US915 (channels 56-63 + 71)"
|
||||
# Name is an use-defined identifier for this region.
|
||||
name="us915_7"
|
||||
|
||||
# Common-name refers to the common-name of this region as defined by
|
||||
# the LoRa Alliance.
|
||||
@ -30,15 +27,14 @@
|
||||
# MQTT configuration.
|
||||
[regions.gateway.backend.mqtt]
|
||||
|
||||
# Topic prefix.
|
||||
#
|
||||
# The topic prefix can be used to define the region of the gateway.
|
||||
# Note, there is no need to add a trailing '/' to the prefix. The trailing
|
||||
# '/' is automatically added to the prefix if it is configured.
|
||||
topic_prefix="us915_7"
|
||||
# Event topic template.
|
||||
event_topic="us915_7/gateway/+/event/+"
|
||||
|
||||
# Command topic template.
|
||||
command_topic="us915_7/gateway/{{ gateway_id }}/command/{{ command }}"
|
||||
|
||||
# MQTT server (e.g. scheme://host:port where scheme is tcp, ssl or ws)
|
||||
server="tcp://$MQTT_BROKER_HOST:1883"
|
||||
server="tcp://mosquitto:1883"
|
||||
|
||||
# Connect with the given username (optional)
|
||||
username=""
|
||||
@ -61,21 +57,15 @@
|
||||
# Set the "clean session" flag in the connect message when this client
|
||||
# connects to an MQTT broker. By setting this flag you are indicating
|
||||
# that no messages saved by the broker for this client should be delivered.
|
||||
clean_session=false
|
||||
clean_session=true
|
||||
|
||||
# Client ID
|
||||
#
|
||||
# Set the client id to be used by this client when connecting to the MQTT
|
||||
# broker. A client id must be no longer than 23 characters. If left blank,
|
||||
# a random id will be generated by ChirpStack.
|
||||
# broker. A client id must be no longer than 23 characters. When left blank,
|
||||
# a random id will be generated. This requires clean_session=true.
|
||||
client_id=""
|
||||
|
||||
# Keep alive interval.
|
||||
#
|
||||
# This defines the maximum time that that should pass without communication
|
||||
# between the client and server.
|
||||
keep_alive_interval="30s"
|
||||
|
||||
# CA certificate file (optional)
|
||||
#
|
||||
# Use this when setting up a secure connection (when server uses ssl://...)
|
||||
7
configuration/postgresql/initdb/001-init-chirpstack.sh
Normal file
7
configuration/postgresql/initdb/001-init-chirpstack.sh
Normal file
@ -0,0 +1,7 @@
|
||||
#!/bin/bash
|
||||
set -e
|
||||
|
||||
psql -v ON_ERROR_STOP=1 --username "$POSTGRES_USER" <<-EOSQL
|
||||
create role chirpstack with login password 'chirpstack';
|
||||
create database chirpstack with owner chirpstack;
|
||||
EOSQL
|
||||
2
configuration/postgresql/initdb/001-chirpstack_extensions.sh → configuration/postgresql/initdb/002-chirpstack_extensions.sh
Executable file → Normal file
2
configuration/postgresql/initdb/001-chirpstack_extensions.sh → configuration/postgresql/initdb/002-chirpstack_extensions.sh
Executable file → Normal file
@ -1,7 +1,7 @@
|
||||
#!/bin/bash
|
||||
set -e
|
||||
|
||||
psql -v ON_ERROR_STOP=1 --username "$POSTGRES_USER" --dbname="$POSTGRES_DB" <<-EOSQL
|
||||
psql -v ON_ERROR_STOP=1 --username "$POSTGRES_USER" --dbname="chirpstack" <<-EOSQL
|
||||
create extension pg_trgm;
|
||||
create extension hstore;
|
||||
EOSQL
|
||||
@ -1,80 +1,48 @@
|
||||
version: "3"
|
||||
|
||||
services:
|
||||
chirpstack:
|
||||
image: chirpstack/chirpstack:4
|
||||
image: chirpstack/chirpstack:4.0.0-test.12
|
||||
command: -c /etc/chirpstack
|
||||
restart: unless-stopped
|
||||
volumes:
|
||||
- ./configuration/chirpstack:/etc/chirpstack
|
||||
- ./lorawan-devices:/opt/lorawan-devices
|
||||
depends_on:
|
||||
- postgres
|
||||
- mosquitto
|
||||
- redis
|
||||
environment:
|
||||
- MQTT_BROKER_HOST=mosquitto
|
||||
- REDIS_HOST=redis
|
||||
- POSTGRESQL_HOST=postgres
|
||||
ports:
|
||||
- "8080:8080"
|
||||
- 8080:8080
|
||||
|
||||
chirpstack-gateway-bridge:
|
||||
image: chirpstack/chirpstack-gateway-bridge:4
|
||||
restart: unless-stopped
|
||||
chirpstack-gateway-bridge-eu868:
|
||||
image: chirpstack/chirpstack-gateway-bridge:3
|
||||
ports:
|
||||
- "1700:1700/udp"
|
||||
- 1700:1700/udp
|
||||
volumes:
|
||||
- ./configuration/chirpstack-gateway-bridge:/etc/chirpstack-gateway-bridge
|
||||
environment:
|
||||
- INTEGRATION__MQTT__EVENT_TOPIC_TEMPLATE=eu868/gateway/{{ .GatewayID }}/event/{{ .EventType }}
|
||||
- INTEGRATION__MQTT__STATE_TOPIC_TEMPLATE=eu868/gateway/{{ .GatewayID }}/state/{{ .StateType }}
|
||||
- INTEGRATION__MQTT__COMMAND_TOPIC_TEMPLATE=eu868/gateway/{{ .GatewayID }}/command/#
|
||||
depends_on:
|
||||
depends_on:
|
||||
- mosquitto
|
||||
|
||||
chirpstack-gateway-bridge-basicstation:
|
||||
image: chirpstack/chirpstack-gateway-bridge:4
|
||||
restart: unless-stopped
|
||||
command: -c /etc/chirpstack-gateway-bridge/chirpstack-gateway-bridge-basicstation-eu868.toml
|
||||
ports:
|
||||
- "3001:3001"
|
||||
volumes:
|
||||
- ./configuration/chirpstack-gateway-bridge:/etc/chirpstack-gateway-bridge
|
||||
depends_on:
|
||||
- mosquitto
|
||||
|
||||
chirpstack-rest-api:
|
||||
image: chirpstack/chirpstack-rest-api:4
|
||||
restart: unless-stopped
|
||||
command: --server chirpstack:8080 --bind 0.0.0.0:8090 --insecure
|
||||
ports:
|
||||
- "8090:8090"
|
||||
depends_on:
|
||||
- chirpstack
|
||||
|
||||
postgres:
|
||||
image: postgres:14-alpine
|
||||
restart: unless-stopped
|
||||
image: postgres:11-alpine
|
||||
volumes:
|
||||
- ./configuration/postgresql/initdb:/docker-entrypoint-initdb.d
|
||||
- postgresqldata:/var/lib/postgresql/data
|
||||
environment:
|
||||
- POSTGRES_USER=chirpstack
|
||||
- POSTGRES_PASSWORD=chirpstack
|
||||
- POSTGRES_DB=chirpstack
|
||||
- POSTGRES_PASSWORD=root
|
||||
|
||||
redis:
|
||||
image: redis:7-alpine
|
||||
restart: unless-stopped
|
||||
command: redis-server --save 300 1 --save 60 100 --appendonly no
|
||||
image: redis:6-alpine
|
||||
volumes:
|
||||
- redisdata:/data
|
||||
|
||||
mosquitto:
|
||||
image: eclipse-mosquitto:2
|
||||
restart: unless-stopped
|
||||
ports:
|
||||
- "1883:1883"
|
||||
- 1883:1883
|
||||
volumes:
|
||||
- ./configuration/mosquitto/config/:/mosquitto/config/
|
||||
- ./configuration/eclipse-mosquitto/mosquitto.conf:/mosquitto/config/mosquitto.conf
|
||||
|
||||
volumes:
|
||||
postgresqldata:
|
||||
|
||||
Loading…
Reference in New Issue
Block a user